JHCC Posted April 23, 2019 Share Posted April 23, 2019 1 hour ago, ausfire said: Drilled first and shaped? Yes, that’s right. I straightened a couple of coil spring segments on Sunday and threw them in the hot box to anneal. Yesterday, I drilled out the centers on the drill press (at 1/8” and 1/4”) and ground down the outsides on the 2x90. Next time I fire up the forge, I’ll harden and temper them. Quote Link to comment Share on other sites More sharing options...
JHCC Posted April 23, 2019 Share Posted April 23, 2019 3 hours ago, ausfire said: I would like to find a way of forging an eye punch that has a spot in the middle. I don't think it's possible. I can think of three ways to do it off the top of my head, although I have no idea if any of them would actually work. 1. Make the punch as I did above, but drill an additional smaller hole at the bottom of and centered on the main hole. Insert a small pin to act as the punch for the pupil. (Maybe braze it in place? If you did, you probably wouldn't be able to do a proper heat-treat on the punch.) 2. In a piece of high-carbon steel, forge the eye you want with a normal eye punch and dot the pupil with a center punch, Harden, and hammer the end of a heated rod into the eye to form it to that shape, like some people do to make their touchmarks. 3. Drill the hole in the end of the punch blank with a hollow-center drill bit. I don’t know where one might get such a thing, but presumably a machinist could make one. This is all purely theoretical, and as I said, I have no idea if any of these methods would actually work. Might be fun to try, though. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted April 23, 2019 Share Posted April 23, 2019 Sure. I started just cutting the mouths with a hacksaw. It's very little work and way easier then when I chiseled them open hot. Once I'm done with the snake I cut a little fork tongue out of copper, put it in the mouth and tap the mouth shut on it. Quote Link to comment Share on other sites More sharing options...
Chris J Dixon Posted April 23, 2019 Share Posted April 23, 2019 It's really inspiring seeing everyone's projects, big and small. Thanks for sharing!! Quote Link to comment Share on other sites More sharing options...
alexandr Posted April 23, 2019 Share Posted April 23, 2019 I installed a small wicket for the dog. Quote Link to comment Share on other sites More sharing options...
Pr3ssure Posted April 23, 2019 Share Posted April 23, 2019 alexandr, everything you do is above and beyond. Like today i cleaned up my mower and attempted to mow but it rained. For you its like, today I made the fanciest dog gate the world has ever known, nothing special though, im alexandr... But seriously, i strive to be half as good as you. Quote Link to comment Share on other sites More sharing options...
Frosty Posted April 23, 2019 Share Posted April 23, 2019 Another beautiful piece Alexandr. Open or closed it's a work of precisely planned and executed art. How does your dog like it? Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
ausfire Posted April 23, 2019 Share Posted April 23, 2019 I think Mr Pr3ssure sums up the feeling of many of us about alexandr's work. He makes us all feel a bit inadequate. Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted April 23, 2019 Share Posted April 23, 2019 Alexander thats an adorable gate, nice work Quote Link to comment Share on other sites More sharing options...
SFC Snuffy Posted April 24, 2019 Share Posted April 24, 2019 Today is my son's fifth birthday. He got his first visit to my friend's forge and made his first nail and first hook. Quote Link to comment Share on other sites More sharing options...
BillyBones Posted April 24, 2019 Share Posted April 24, 2019 Sarge, that is cool ya got the kid doin it. My granddaughters are 6 and love to be in the shop with papa. They mark the anvil, but cant move steel for nothing. So today Alexandr makes a master peice of a wicket (thanks i learnt a new word today) and me i set my self on fire. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted April 24, 2019 Share Posted April 24, 2019 Great, and great firsts Snuffy! Good job getting him started. And tell him Happy Birthday from the ifi group. Billy, the key point is that you got it out in time to tell us about it and to not be in intensive care. Quote Link to comment Share on other sites More sharing options...
Eventlessbox Posted April 24, 2019 Share Posted April 24, 2019 Scruffy, that's awsome. I'm jealous of those safety goggles. Those things are awsome. Quote Link to comment Share on other sites More sharing options...
SFC Snuffy Posted April 24, 2019 Share Posted April 24, 2019 I set myself on fire at work a couple of weeks ago. A little too much excitement for an ammunition factory. My son did a bit of both (moving metal and marking the anvil). I got him a small ball-pein, but it's too light to move much steel. He does okay with my little 2-lb. rounding hammer, but it's really too heavy for him to get more than a few swings in. Fortunately, the striking anvil is a good height for him so that's what we used. Thanks for the kind wishes, all. Quote Link to comment Share on other sites More sharing options...
George N. M. Posted April 24, 2019 Share Posted April 24, 2019 Dear Sargent First Class Snuffy, A classic blacksmith quote: "Yes, I know I'm on fire, just let me finish this weld." "By hammer and hand all arts do stand." Quote Link to comment Share on other sites More sharing options...
Eventlessbox Posted April 24, 2019 Share Posted April 24, 2019 Finished a few walls with insulation and drywall in the tiny house today. The big wooden cube is the landing for a split ladder for my kid to get into his loft bedroom. Trying to get a room fully insulated for A/C before Florida gets much hotter. Lol. Quote Link to comment Share on other sites More sharing options...
alexandr Posted April 24, 2019 Share Posted April 24, 2019 Thanks guys. Bench made a couple of years ago, stands in the same room. 21 hours ago, Frosty said: How does your dog like it? It isnot mine. My dogs live free. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 25, 2019 Share Posted April 25, 2019 Dog Gates were a common feature in large country houses in the UK (and a great place to show off fancy smithing). Some of the coffee table books on such houses show them. In my house we have a cat excluder door for our bedroom. We use a swamp cooler and so need to leave the door open for cooling; but my wife doesn't like to be woken up by cats jumping onto the bed from the top of the dresser. Unfortunately it's currently just a screen door. Perhaps when I retire I can work on a fine steel filigree one. Quote Link to comment Share on other sites More sharing options...
Frosty Posted April 25, 2019 Share Posted April 25, 2019 Those look like outdoor dogs alright. We have one long haired dog but she's Deb's service dog and lives indoors, the smooth coat Dachshunds are definitely indoor dogs in winter. We can't let ours run anyway, we live on a busy road. We use child gates to keep them from chasing the upstairs cat or jumping on Deb to play. You humble me every time you show your work Alexandr. You're a blacksmith artist in the truest sense of the term. Thank you for showing us your work. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
Rojo Pedro Posted April 26, 2019 Share Posted April 26, 2019 Yes thanks Alexandr. My Wife makes me show her your posts too! I wanted to swing a hammer after work so I squared off a piece of 1/4” round copper. couldn't believe it took 20 minutes !! Fun to do Quote Link to comment Share on other sites More sharing options...
Cannon Cocker Posted April 26, 2019 Share Posted April 26, 2019 On 4/23/2019 at 2:54 AM, ausfire said: I would like to find a way of forging an eye punch that has a spot in the middle. I don't think it's possible. Some endmills have a void in the center. Perhaps you could find a ball endmill that has a center void and Chuck it up in your drill press. (or better yet a lathe) Quote Link to comment Share on other sites More sharing options...
JHCC Posted April 26, 2019 Share Posted April 26, 2019 Other endmills are unavoidable. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 26, 2019 Share Posted April 26, 2019 Forge a punch to make the eyepunch. Drill a void in that punch before hardening. However a small cone in the eyepunch will overheat and wear fast. Why not just use a separate punch to make the pupil? Quote Link to comment Share on other sites More sharing options...
Chelonian Posted April 26, 2019 Share Posted April 26, 2019 Someone recently gave me this thing, but I'm not exactly sure what it is: The shape sure seems reminiscent of a cold chisel, but the end is pretty strange. Perhaps it was just modified at some point? If anyone knows what it is/was, please let me know. It does spark as fairly high carbon, so I was thinking I maybe it would make a decent hot chisel. Quote Link to comment Share on other sites More sharing options...
anvil Posted April 26, 2019 Share Posted April 26, 2019 On 4/23/2019 at 8:15 PM, George N. M. said: A classic blacksmith quote: "Yes, I know I'm on fire, just let me finish this weld." Aah, nothing beats the smell of _ _ _ in the morning,,, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.