ausfire Posted October 7, 2019 Share Posted October 7, 2019 Thanks Glenn II for the idea of forging the bottle openers on the diagonal. I have always done them on the flat of the square, but I do like the clean lines of the diagonal. I did these today … sometimes it's good just to keep things simple. Quote Link to comment Share on other sites More sharing options...
Glenn II Posted October 7, 2019 Share Posted October 7, 2019 Looks great as always Ausfire! Quote Link to comment Share on other sites More sharing options...
JHCC Posted October 7, 2019 Share Posted October 7, 2019 An experiment with a water leaf: Quote Link to comment Share on other sites More sharing options...
Awrksmokey Posted October 20, 2019 Share Posted October 20, 2019 found a piece of steel that I'd punched a hole through (very badly) a while ago. Quote Link to comment Share on other sites More sharing options...
ausfire Posted October 29, 2019 Share Posted October 29, 2019 Here's another variation on the 'cobropener'. I wanted to get a scale pattern … this done with a cutting wheel, nicks on each edge and twisted tightly. Mouth takes bit of tweaking but it works! Quote Link to comment Share on other sites More sharing options...
MYX Posted October 29, 2019 Share Posted October 29, 2019 I finally have my forge up and running. And... I made a thing. Aside from a couple of nails, this is the first real usable things I have made. About a year ago I saw an opener back on page 45 by VaughnT that really inspired me. There's a world of difference between the one he made and I made... meaning that his is pretty and mine has a sort of dog poop sort of vibe, but hey, it's mine and I made it. I did it from memory and so there's some differences which I will fix the next time out. Sadly, I am out of gas until payday, so I can't make another one yet. But I know for next time to not cut off so much material until I am sure I don't need it. In Vaughn's version, it has enough length to allow a graceful bend back to the slot. I got my tip through the hole and had all sorts of extra, so I cut it off. I should have just backed it off, and let the length remain. Also, from an ergonomics point of view, his has a nice downward slope and then it straightens out along the spine. Lastly, I think I got carried away with the twist. All this pushing metal with relative ease (as compared to when it's cool) kinda went to my head and I lost count of how many twists I was on. Then it started to look like rope, and I went with it, and thought, I bet it looks even better with one more twist, and... here we have it. The punch thing was somewhat tricky, but I am sure that gets easier with practice. Quote Link to comment Share on other sites More sharing options...
ausfire Posted October 30, 2019 Share Posted October 30, 2019 That is a really cool little opener. It's stylish and functional … well done! I remember the one that Vaughn did because I copied it to my 'inspirations' file. Never did get round to trying one. I'm inspired again. Quote Link to comment Share on other sites More sharing options...
ausfire Posted November 20, 2019 Share Posted November 20, 2019 A couple with heavily textured handles. One cube twist and one 'stairway' (?) twist. Both forged on the diagonal. I've made that the default method now. Quote Link to comment Share on other sites More sharing options...
pnut Posted November 20, 2019 Share Posted November 20, 2019 (edited) Did you get the "stairway" twist by only cutting it on two sides like half of a cube twist? Nearly forgot to mention how nice and clean they both look. Was the copper done with a brush at heat? Pnut Edited November 20, 2019 by pnut Quote Link to comment Share on other sites More sharing options...
ausfire Posted November 21, 2019 Share Posted November 21, 2019 Yes, the stairway twist (others might have a different name) has a light line cut down each face and then cuts made to meet those lines on two opposite corners only. The cube twist is done cutting in from all four corners. And yes, the gold is just a bit of burnishing with a fine brass brush (copper is a bit dark) while the steel is hot. Black heat only - red will vaporise brass. Quote Link to comment Share on other sites More sharing options...
pnut Posted November 21, 2019 Share Posted November 21, 2019 Thanks. They look great. Pnut Quote Link to comment Share on other sites More sharing options...
Blackegg Posted November 24, 2019 Share Posted November 24, 2019 My first try at the Dragon's Scale style. I think it's pretty cool. Quote Link to comment Share on other sites More sharing options...
Donnie Posted November 24, 2019 Share Posted November 24, 2019 Cool, indeed. Well done. Quote Link to comment Share on other sites More sharing options...
pnut Posted November 24, 2019 Share Posted November 24, 2019 That's amazing. How long did the chisel work take? Pnut Quote Link to comment Share on other sites More sharing options...
Old Crew Posted November 25, 2019 Share Posted November 25, 2019 Excellent Especially for a first attempt Quote Link to comment Share on other sites More sharing options...
John B Posted November 26, 2019 Share Posted November 26, 2019 Well executed, but is this an appropriate twist for an item which has to be hand held? Quote Link to comment Share on other sites More sharing options...
anvil Posted November 26, 2019 Share Posted November 26, 2019 ausfire, nice, especially the bottom one. I like the way the top edge of the diamond splits, almost evenly, and moves around the top of the opener. That's a very subtle detail that really catches the eye. A small teardrop punch would clean that up nice. The devil's in the details. I'm a big fan of being "on the diamond". It's a simple detail that separates forged from fab work. That "trick" even puts a simple "s" hooks into a category far above cheap imports turned "on the flat". Quote Link to comment Share on other sites More sharing options...
pnut Posted November 26, 2019 Share Posted November 26, 2019 (edited) 2 hours ago, John B said: Well executed, but is this an appropriate twist for an item which has to be hand held? I thought it might be a bit uncomfortable in use but I assumed he was making it as a vehicle for the twist pattern and not necessarily to be used regularly. I guess a quick way to find out would be to ask. B.E. were you meaning to use it regularly or is it decorative? Pnut Edited November 26, 2019 by pnut Quote Link to comment Share on other sites More sharing options...
John B Posted November 28, 2019 Share Posted November 28, 2019 The point of the question was to try to make is that as blacksmiths, we should not assume, but get our facts together and act on them. Many times I see items (usually made by people new to the craft) that do not seem to suitable for function, either comfort wise or safety wise. This is not a criticism, merely a comment, and some may note and act on it, others ignore it. If you are making it for your own enjoyment, then it's not a problem, however if you are making it to market, then safety and comfort become more important. Enjoy your Thanksgiving day Quote Link to comment Share on other sites More sharing options...
VictoriaFlow Posted December 11, 2019 Share Posted December 11, 2019 When you able to use handy things Quote Link to comment Share on other sites More sharing options...
Daswulf Posted December 11, 2019 Share Posted December 11, 2019 Made a few wrench openers, lil different tho. Is that one mainly ground? I like it. Wouldn't forge chrome plated wrenches tho. Welcome to ifi. Also Shiner is a fine drinker. Quote Link to comment Share on other sites More sharing options...
KYCATS Posted December 11, 2019 Share Posted December 11, 2019 My first 3 attempts at bottle openers. They have been tested and all passed Quote Link to comment Share on other sites More sharing options...
Les L Posted December 11, 2019 Share Posted December 11, 2019 Great looking work Quote Link to comment Share on other sites More sharing options...
Daswulf Posted December 11, 2019 Share Posted December 11, 2019 Nice work Kycats! And the testing of them is the best part! Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted December 12, 2019 Share Posted December 12, 2019 Made this at a demo a while back. Took about 15 minutes (and it shows) but it pops a top just fine. Gifted the one from the other half of the shoe to a young man who wanted to give it to his father (finished better). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.