Goods Posted September 22, 2023 Share Posted September 22, 2023 Jennifer, I’ve already modified the drift and I’m happy with the results. Maybe it the perfectionist in me, but I want to know that the shape is correct before the forging cools down. All the hawk handles I have are pretty consistent. (I’ve been purchasing them from Dunlap Wood Crafts and I’m really happy with them. Basic hickory to fancy curly wood of different types.) I already have another drift on the way from Holland Anvil. Mine is not in the best condition at this point and the specs on this one look close to the handles I use. (Just in case I really screwed this one up) Plus this one is H13, so it should be much longer lasting. (Honestly, it was a hard decision to purchase one, I’m usually the type to make my own!) I am also forging the final eye size one the drift/mandrel. I just didn’t calculate the length needed correctly the this time around and ended up significantly reducing the eye wall thickness which took a lot of time and effort. I really need to start keeping a note book on my projects so I’m not start from scratch and poor memory every time! It’s funny, I expect to to modify axe and hammer handles, but the hawk handles are beautiful and I can’t bring myself to modify them beyond a little sanding. Chimaera, the first hawk is not too bad, but the eye wall ended up much thinner than I would prefer. On the second one, I used more material for the eye, so that was better, but I decided to fit the eye to my handle better before moving to welding the bit. I let the forging cool, checked the fit up and tried to narrow the eye up cold (I know, dumb mistake) and blew the weld. I’m not sure I’ll be able to get the eye to weld again, but I’ll try later. Right now, I’ve got the crazy idea that I want to weld the eye below the blade set down similar to some Scandinavian traditional axes. I know, even less like a traditional trade axe/hawk, but I just get an idea in my head and obsess over it. So, may end up trying that before I fix these two. I really should just fix these. I have a festival coming up in a few weeks and need to get my inventory built up. I want at least five hawks, hatches, blacksmith and knives maybe even a few throwing knives. They are the hot topics at this festival. (We’re setup right next to the throwing are we’re the competitions are held!) I know this was a bit long winded and full of excuses… but I looked forward to and appreciate the insights and criticisms from everyone here. It helps! I’d really like to be able to sit down with everyone and have some deep forging discussions. (Who am I kidding, we’d be at an anvil discussing stuff!) I’m not going to make it to Quad State either . Maybe next year? Keep it fun, David Quote Link to comment Share on other sites More sharing options...
Frosty Posted September 22, 2023 Share Posted September 22, 2023 If it's the dust that bothers you about working bone do it wet or Epoxy stabilize it to prevent swelling, etc. then work it wet. Enjoy Quadstate, maybe I'll get to shake your hand there someday. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
wirerabbit Posted September 23, 2023 Share Posted September 23, 2023 (edited) Wow. You all are making some great stuff. I've been away from the anvil for so long, I'm sure I have to relearn everything! The main thing is that I've gotten back to the anvil and have tried to set up my space under a tin roof. Reorganized the space and made some much needed tools/jigs. You don't have to tell me my welding is BAD. I know. Made some adjustable bending forks for the bench vice. Speaking of vise. I replaced the hardened jaws with some mild steel. I've already hit it with an errant grinding wheel. Oops. Plenty of room here. No more forging on the driveway under the oak tree. Made a simple butchering/fullering tool for the anvil. First set of tools is a 30 degree butcher for tenons, etc. I have more steel for other shapes I'm looking forward to getting some stuff made in the shade! If anyone sees any problems with my set up, let me know. Edited September 23, 2023 by wirerabbit style Quote Link to comment Share on other sites More sharing options...
JHCC Posted September 24, 2023 Share Posted September 24, 2023 Tried out the electric etcher I got from the industrial surplus place: And did some more work on the current batch of knitting bowls: Quote Link to comment Share on other sites More sharing options...
gewoon ik Posted September 24, 2023 Share Posted September 24, 2023 The bowls are selling good, you make a batch often. Good for you and your wife. Quote Link to comment Share on other sites More sharing options...
JHCC Posted September 24, 2023 Share Posted September 24, 2023 Here’s a fullering stake I made a while back, as used for the second round of shrinking in the rims. Quote Link to comment Share on other sites More sharing options...
LarryFahnoe Posted September 24, 2023 Share Posted September 24, 2023 John, I for one am appreciating seeing your tooling for the bowls, very interesting. I've only briefly tinkered with shrinking and stretching & am intrigued to learn more. Have ordered Moving Metal by Adolph Steines as it sounds like it is a worthwhile reference. I have a few(!) more interests than I have time it seems though... --Larry Quote Link to comment Share on other sites More sharing options...
alexandr Posted September 24, 2023 Share Posted September 24, 2023 Chinese consumer goods lasted 3 years. I installed new lights, I hope they will last for several decades Quote Link to comment Share on other sites More sharing options...
George N. M. Posted September 24, 2023 Share Posted September 24, 2023 Your house or a customer's? Are the lights battery or soalr powered LEDs? Thanks. GNM Quote Link to comment Share on other sites More sharing options...
Chad J. Posted September 25, 2023 Share Posted September 25, 2023 Yesterday my gf finally got me out to Villa Terrace in Milwaukee to see the pieces there from Cyril Colnik. I wanted to get there, it was just a time issue. The pieces there were amazing. I have probably 60 pictures of different angles if his stuff. Today was back to the shop. Made a new hot cut for the hf anvil and it's the best I've made yet. Successfully forge welded 4 more basket twist ornaments. I think I've got the basic down. I am going to have to start trying some of the other welds. Made a nice towel holder. I made it for paper towels but end user gets to decide. Working on another style of towel holder that's going to have a wooden dowel run through it. I'll get pictures up when I finish that. Quote Link to comment Share on other sites More sharing options...
JHCC Posted September 25, 2023 Share Posted September 25, 2023 Just a little time in the shop, doing a little more lining on the latest repoussé practice piece. I’ve been having a lot of trouble with my left hand cramping up, so I’m experimenting with using a pierced tennis ball* as an ergonomic tool holder. It’s got a couple of different sizes of hole fit different sizes of tool. So far, so good. We’ll see how it does for a more protracted session. * Technically a variety made as a dog toy; I may end up trying one of the usual type as well. Quote Link to comment Share on other sites More sharing options...
Shainarue Posted September 25, 2023 Share Posted September 25, 2023 Nice work Chad. I've also been working on basket twists and crazy enough, I had also made a paper towel holder this week, lol The coil in the middle is to add a bit a resistance when a square is being pulled off. Previous paper towel holders I've made required the person to hold the roll still while tearing, otherwise you'd end up with 6 ft of towels! I had quite a few hiccups during the making of this... just have those days sometimes where nothing seems to go right ... this was one of those weeks, lol But Ashley (the wife) is happy with it so that's all that matters this time around. Quote Link to comment Share on other sites More sharing options...
alexandr Posted September 25, 2023 Share Posted September 25, 2023 20 hours ago, George N. M. said: Your house or a customer's? Are the lights battery or soalr powered LEDs? Customer's house. Regular LED bulbs are 220 volts. I'm working on a bent handrail. Quote Link to comment Share on other sites More sharing options...
arkie Posted September 25, 2023 Share Posted September 25, 2023 John,.....a "practice" piece? That nautilus looks great as is! Looking forward to a "finished" piece. Quote Link to comment Share on other sites More sharing options...
Chimaera Posted September 25, 2023 Share Posted September 25, 2023 Looking good everyone. Quadstate was a blast, I met up with some guys from the Cincy Blacksmiths' Guild and got an opportunity to do some forging with them. Mine are on the top, my father's (with a bit of help from yours truly) are on the bottom. Was a lot of fun to have the opportunity to do some with my dad. I got a bit overly fancy and tried to do a leaf on my bottle opener. Do not like how that turned out, and additionally I accidentally made it left handed. Will probably cut off the leaf, clean it up a bit, and give it to one of my lefty friends. Quote Link to comment Share on other sites More sharing options...
JHCC Posted September 25, 2023 Share Posted September 25, 2023 My first corkscrew was accidentally left-handed, so I gave it to my southpaw brother along with some blague about how I made it specially for him. Quote Link to comment Share on other sites More sharing options...
Frosty Posted September 25, 2023 Share Posted September 25, 2023 I THINK the practice piece John is talking about is the tennis ball punch holder, Arkie. Of course I could be wrong, that happens a lot it must be the high latitude and sun angle. Nice line up Chimaera, if your Dad's looking for a job I'll put in a word with my contacts who play with fire ad hit things with hammer. Turning your first cork screws backwards is sort of like putting the finial scroll on the wrong side of first hooks isn't it? Sort of a blacksmith's dues thing. I keep telling myself anyway. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
Chimaera Posted September 26, 2023 Share Posted September 26, 2023 Thanks frosty, but no job offer for me?? Quote Link to comment Share on other sites More sharing options...
Frosty Posted September 26, 2023 Share Posted September 26, 2023 I'm sure your Dad will put in a word, I'll back him on it. In truth I'm pretty sure I'd introduce you to the guys, you'd show your stuff and be in like Flynn. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
JHCC Posted September 26, 2023 Share Posted September 26, 2023 The practice piece in question is another small repoussé project, this one inspired by the cross section of a chambered nautilus. Here it is after this evening’s session: I also added an adjustable support for my magnifying lamp, which is working quite well: The adjustment is locked in place with a big square-headed bolt and the recently acquired “plow wrench”. Quote Link to comment Share on other sites More sharing options...
Scott NC Posted September 26, 2023 Share Posted September 26, 2023 I'm with Arkie, I can't wait to see the finished piece. You are inspiring me to give repoussé yet another try.... I'm impressed with your set up, the magnifying lamp adjustment bolt and wrench are nice additions. Quote Link to comment Share on other sites More sharing options...
Rojo Pedro Posted September 26, 2023 Share Posted September 26, 2023 Me too! Very nice set up and you have inspired me to give my pitch bowl another go. Quote Link to comment Share on other sites More sharing options...
Chimaera Posted September 26, 2023 Share Posted September 26, 2023 On 9/23/2023 at 10:08 PM, JHCC said: ried out the electric etcher I got from the industrial surplus place: Looks good. How much was that? I've been thinking of switching from a touchmark to an electroetcher... It's easy to electromark with just a 9V but deep etching requires DC. Thinking of making a DC converter from an old laptop cord, but don't know if it's worth the time, money, risk etc. Quote Link to comment Share on other sites More sharing options...
gewoon ik Posted September 26, 2023 Share Posted September 26, 2023 Made a small tracing chisel from some coilspring. Was a bit too long, so from the piece i cut off, i made a scribe They are hardend and they work. Chisel is a bit on the thin side. Will see. Quote Link to comment Share on other sites More sharing options...
swedefiddle Posted September 27, 2023 Share Posted September 27, 2023 Good Morning, I make chisels from VW Van Torsion Bar leaves, very similar to what you have. They work wonderful for opening up the split/cut crosses. They are also perfect for dainty work, repousse' work, etc. Neil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.