Jacques Posted February 28, 2012 Share Posted February 28, 2012 I got a good deal on this Hougen magnetic drill as well, I saw one in a pawnshop once for less than the price of a cheap hand drill, and the bloody woman I was with at that stage were angry because I dragged her in there so I left it. Can still kick myself. Quote Link to comment Share on other sites More sharing options...
Hayden H Posted March 3, 2012 Share Posted March 3, 2012 Went to a garage sale with my grandma. (Sounds like a bad idea huh?). The man happened to be selling more mechanic tools than I've ever seen to this point in my life. Matco, Snap On, Plumb, you name it Made In America. CHEAP!!! But, alas I didn't have any $100's to offer on the roll-around. But I did however get 30+ years accumulation of files, a belt-driven bench grinder, drill bit sharpener (mounts next to grinder), Kennedy top box (smallish one), a cigar box FULL of taps and dies, and an odd lot of wire wheels. for $50!! I'm going back tomorrow to make an offer on the whole shabang! I want the medium size roll-around that matches the top box. It's replace the peice harbor freight one I bought a few years ago for $40. If I get it, I'll sell the chinese one and replace it with American Metal Quote Link to comment Share on other sites More sharing options...
Hayden H Posted March 3, 2012 Share Posted March 3, 2012 Also an odd wooden box (small but will hold my micro knife kit), and some random clamps of all kinds Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted March 5, 2012 Share Posted March 5, 2012 I once picked up a trashed micrometer at a junk store for US$1.50 to use as a welding clamp whenever any machinists come by...their reactions are most amusing! Quote Link to comment Share on other sites More sharing options...
teenylittlemetalguy Posted March 5, 2012 Share Posted March 5, 2012 LOL! Wish I could see their faces! Quote Link to comment Share on other sites More sharing options...
Ramsberg Posted March 5, 2012 Share Posted March 5, 2012 Thomas, that's just EVIL, but very funny! Quote Link to comment Share on other sites More sharing options...
pkrankow Posted March 6, 2012 Share Posted March 6, 2012 I once picked up a trashed micrometer at a junk store for US$1.50 to use as a welding clamp whenever any machinists come by...their reactions are most amusing! Funniest thing I read in a while! Phil Quote Link to comment Share on other sites More sharing options...
Larry H Posted March 6, 2012 Share Posted March 6, 2012 That is one sweet anvil, the good deals are still out there ! ! ! Quote Link to comment Share on other sites More sharing options...
Harmless Dave Posted March 6, 2012 Share Posted March 6, 2012 Went out to the local salvage yard (has everything from steel to wood to masonry) looking for a quench tank and a table top. Came home with a one of each. The quench tank is SS and has a sliding top. About 15"x24"x24" deep already mounted on 5" swivel casters- $25.00. They used two fork trucks to put the steel plate in my F-150. It is 48"x96"x1". I figure it weighed about 1000#. After they got it in, the owner said $95.00. The only other great deal I've gotten lately was a 200#, well used anvil for $225.00. The deals are there if you can wait. Harmless Dave Quote Link to comment Share on other sites More sharing options...
Jeddly Posted March 6, 2012 Share Posted March 6, 2012 Awesome score on that one inch sheet Dave T!!!! Thats a good chunk of money at the store. Quote Link to comment Share on other sites More sharing options...
Bigred1o1 Posted March 6, 2012 Share Posted March 6, 2012 today i came home with a 130-150lb Hay Budden (thanks for the id) and 15 nippers/tongs for 75bucks and a bit of shifting and lifting to get to them and then to move things around for the person selling them my thought is to reforge a few of the nippers into tongs after i check around to see if i can find any farriers interested in trading for any of them Quote Link to comment Share on other sites More sharing options...
Bigred1o1 Posted March 6, 2012 Share Posted March 6, 2012 i only wish i had taken a before photo there was up to half a inch of rust dirt and paint on it Quote Link to comment Share on other sites More sharing options...
Tom Allyn Posted March 10, 2012 Share Posted March 10, 2012 They used two fork trucks to put the steel plate in my F-150. It is 48"x96"x1". I figure it weighed about 1000#. After they got it in, the owner said $95.00. That piece should weigh about 1320#. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted March 13, 2012 Share Posted March 13, 2012 Picked up a 10# Atha sledge at the Las Cruces fleamarket. In surprisingly good shape for the type, age and area; paid US$5 for it. This will go with the 4#'r I picked up several weeks ago. With time I may have a complete Atha set... Also picked up a gouge hone for $1---it's hidden in the dishwasher right now to clean it up a bit. If I don't post anymore you will know that my DW found it.... Quote Link to comment Share on other sites More sharing options...
jerry p. Posted March 14, 2012 Share Posted March 14, 2012 I was helping my buddy clean up his shop before a "hammer in". He said he was tired of moving this table around his shop for the last 8 years, as he never used it. He told me to take it if I wanted it, so i put it on my truck, with the help of his tractor. It weighs about 500lbs, the top is 2'x2'. I want to attached this 7" post vice when it is in place. Do you think it will be stable enough? The vice weighs 150lbs. I dont want it to be too top heavy. Thanks for your thoughts - Jerry P Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted March 14, 2012 Share Posted March 14, 2012 Well with a 10' stick of 1 inch sq stock you should be able to tip that right over. With a 6" piece of 1x1/8 strap you won't be able to. How you plan to use it I don't know. Quote Link to comment Share on other sites More sharing options...
seldom (dick renker) Posted March 14, 2012 Share Posted March 14, 2012 looks like a table off a milling machine or a shaper. should be stout enough. Quote Link to comment Share on other sites More sharing options...
mudbugone Posted March 14, 2012 Share Posted March 14, 2012 Looks like the table from an old "shaper" ...a lot of them got scrapped ,but someone saved that table. It also looks like it did service as a drill press table at some point. You might be able to use the slots to hold the vise with some bolts and the correct nut inserts. Quote Link to comment Share on other sites More sharing options...
PMARTINKNIVES Posted March 14, 2012 Share Posted March 14, 2012 This was the luckiest scrounge I have ever made. I was at my local welding supply 2 weeks ago and we were just shooting the breeze. I had talked to him several times about a wire feed welder, but it always came down to not being able to afford one. I almost bought a worn out former rental from him once, but couldn't even afford that. So, out of nowhere he says, �Hey, you want a wire feed welder for free?" Of course I say �sure, what's the deal?� He comes back with "Oh, it doesn't work. A customer gave it to me after he bought a new one. Just haul the POS out of here and maybe you can get it going" I figure what the heck and his guy helps load it in my truck. I had never heard of this brand and did some research on it. It turns out the thing is used mostly in body shops, which is where this one came from. I tracked down the authorized service center and the guy faxed me a wiring diagram. While fooling around with it I noticed the switch was a little hinky. Sometimes it worked, and sometimes not. I figure that�s what made the original owner give up on it. What's weird about this machine is that the electrical cord coming off of it is very thin for a welder. It's only about 3/8" diameter with a black, white and green 14ga wire inside. Both the welding shop and I assumed it was a 110 welder. Well after hooking it up to a 110 outlet I get nothing, then later I notice a little sticker that says it came from the factory wired for 208 volt. I figure what the heck and hook it up to an extension cord for my buzz box that is huge 10ga wire. It looks pretty funny, but as soon as I turn on the power I hear life in it. I hook up the ground, and sure enough it welds. Tonight I took out the switch and cleaned it and it works fine now. I bought a small roll of flux core wire just to confirm that it wasn�t a fluke that it welded last night, and sure enough, this thing works great. I need to buy a gas bottle for it and some tips and better wire etc, but basically I�ll only be into this welder for the cost of consumables. It is supposed to weld up to 3/8", which covers about 90% of the stuff I do. Anything larger and I just have to break out the tombstone. I've had this same welder for over 25 years, and in its day it was state of the art for body shops. Gerat welder, great find! Quote Link to comment Share on other sites More sharing options...
gator13 Posted March 15, 2012 Share Posted March 15, 2012 The wife went and picked up a Jhm basic for 225. My first "real" anvil. Pretty good shape too. Got a few small chips on the edge of the face and what seems to be a bit of paint splatter. Can't wait for a day off to try it out. Quote Link to comment Share on other sites More sharing options...
VaughnT Posted March 19, 2012 Share Posted March 19, 2012 Finally got something decent to add to this thread! While I was browsing the internet, I ran across this fine gentleman looking to part with a couple of blower. I have never seen blowers with the cast iron bases like these (at least not around these here parts), so I was very curious. The price was simply too good to believe and I feel like I stole these ladies even when you add in the cost of gas to go get them. While I was visiting, he mentioned that he had a small post vise he'd let me have for only $50. How could I say no? Sadly, the Buffalo Climax was rather anti-climactic. She doesn't turn. I popped the cover off to see what I could do about it and found the axles inside to be just completely rusted over. I might be able to break them free and get her back into service, but I can't promise anything. If nothing else, she'll be relegated to yard art status. I'm a bit sad that the jaws on the Columbian don't line up, but I can probably work around that. I certainly don't have a shortage of vises! Quote Link to comment Share on other sites More sharing options...
mudbugone Posted March 19, 2012 Share Posted March 19, 2012 Those blowers are rebuildable unless there is major damage...and neither of those looks damaged... Quote Link to comment Share on other sites More sharing options...
pkrankow Posted March 19, 2012 Share Posted March 19, 2012 Put the blowers in a bucket of oil and check on them next week. The vise can be fixed or used as is, the jaw alignment is low on the list of defects as it doesn't affect usability much. Phil Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted March 19, 2012 Share Posted March 19, 2012 I was helping my buddy clean up his shop before a "hammer in". He said he was tired of moving this table around his shop for the last 8 years, as he never used it. He told me to take it if I wanted it, so i put it on my truck, with the help of his tractor. It weighs about 500lbs, the top is 2'x2'. I want to attached this 7" post vice when it is in place. Do you think it will be stable enough? The vice weighs 150lbs. I dont want it to be too top heavy. Thanks for your thoughts - Jerry P Tried to cut the pics out, but I get an error message when I tried to post it. This is neither a milling machine table, nor a shaper table, it is a radial drill table. The wheels look a bit small, and you may want to figure out a braking system, so that it doesn't move when you use it. After you mount the vise, you will see how tippy it may be. Quote Link to comment Share on other sites More sharing options...
mudbugone Posted March 19, 2012 Share Posted March 19, 2012 You're right... http://www.industrialmachinery.com/store/index.php?main_page=product_info&cPath=367_368_379&products_id=2536 and it probably weighs more than 500# too.. Considering what those things cost you might want to buy your buddy a steak dinner... LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.