Dylan Sawicki Posted October 4, 2017 Share Posted October 4, 2017 Are they good for forging nails? lol. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted October 4, 2017 Share Posted October 4, 2017 this thing is better for localized higher red heat. Just got to start playing with this one and was bending some tough 3/16" higher carbon nail spider legs. I'll need to work with it and the additional coils to see what its limitations are on size of stock and heat but it does say no more then 2 minutes on at a time. Quote Link to comment Share on other sites More sharing options...
Dylan Sawicki Posted October 4, 2017 Share Posted October 4, 2017 What happens after 2 minutes? Quote Link to comment Share on other sites More sharing options...
Iron Poet Posted October 4, 2017 Share Posted October 4, 2017 What happens after 2 minutes? It probably exceeds it's duty cycle and either shuts-off or starts to melt. Quote Link to comment Share on other sites More sharing options...
Dylan Sawicki Posted October 4, 2017 Share Posted October 4, 2017 Quote Link to comment Share on other sites More sharing options...
JHCC Posted October 4, 2017 Share Posted October 4, 2017 It probably exceeds it's duty cycle and either shuts-off or starts to melt. There's a reason that commercial induction forges have some pretty heavy-duty cooling systems. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted October 5, 2017 Share Posted October 5, 2017 Yeah, I don't want to find out too soon. of course I still need to read the manual because the quick start pamphlet knows guys like me and told me to Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 5, 2017 Share Posted October 5, 2017 How about setting rivets? Yeah, most induction forges use copper tubing for the coils so water can be pumped through it to keep it from melting. The current doesn't heat the coils it's the IR from the stock being heated that cooks the coil. One on the site says it'll heat a 3/4" nut to red in 15 seconds with 220v -230v input. A friend of mine is or was handling the induction forges Grant Sarver was producing(?) and I've wanted one of these puppies since I first read about them. One was on my list after I got the shop finished. Stupid tree! Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
JHCC Posted October 5, 2017 Share Posted October 5, 2017 We just got an induction cooktop in our kitchen, and it's pretty amazing how the magnetic coil heats the pan, but not the cooktop itself. Of course, you have to use pans with bottoms that a magnet will stick to, which is why our old pasta pot is now a quench tank. Quote Link to comment Share on other sites More sharing options...
Dylan Sawicki Posted October 5, 2017 Share Posted October 5, 2017 Yeah I’ve read a little bit about those induction heaters/forges. I believe Mark Aspery has a vid on his YouTube channel. It’s a amazing how localized you can get the heat. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 5, 2017 Share Posted October 5, 2017 I'd be guessiny harness rivets for the Little Giant tool! Quote Link to comment Share on other sites More sharing options...
Iron Poet Posted October 5, 2017 Share Posted October 5, 2017 I'd be guessiny harness rivets for the Little Giant tool! Very likely. They sold quite a few leather working tools, harnesses, and saddles. I really only bought it because of the name. Quote Link to comment Share on other sites More sharing options...
Jclonts82 Posted October 5, 2017 Share Posted October 5, 2017 'It' (she) followed me home today. Couldn't be happier. Quote Link to comment Share on other sites More sharing options...
4elements Posted October 5, 2017 Share Posted October 5, 2017 So much more beautiful than anything we make at the forge, congratulations Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 5, 2017 Share Posted October 5, 2017 Well done; but I'm guessing that one of you did most of the labour on that! Quote Link to comment Share on other sites More sharing options...
KiltedWonder Posted October 5, 2017 Share Posted October 5, 2017 Congratulations. Your free time has been used up as of now. I have a daughter myself and could are less that I have less free time as long as I spend it with her. Quote Link to comment Share on other sites More sharing options...
Meadowgrove Posted October 5, 2017 Share Posted October 5, 2017 Congratulations and enjoy the ride! Kids are the purest form of amazing. Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 5, 2017 Share Posted October 5, 2017 Awwwwwwww. . . Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
dagr8tim Posted October 5, 2017 Share Posted October 5, 2017 How about setting rivets? Yeah, most induction forges use copper tubing for the coils so water can be pumped through it to keep it from melting. The current doesn't heat the coils it's the IR from the stock being heated that cooks the coil. One on the site says it'll heat a 3/4" nut to red in 15 seconds with 220v -230v input. A friend of mine is or was handling the induction forges Grant Sarver was producing(?) and I've wanted one of these puppies since I first read about them. One was on my list after I got the shop finished. Stupid tree! Frosty The Lucky. Could you use say a 220 tombstone welder as your power supply for something like that? Quote Link to comment Share on other sites More sharing options...
Daswulf Posted October 5, 2017 Share Posted October 5, 2017 Congrats J! Quote Link to comment Share on other sites More sharing options...
Zeroclick Posted October 5, 2017 Share Posted October 5, 2017 Congratulation Quote Link to comment Share on other sites More sharing options...
Daswulf Posted October 6, 2017 Share Posted October 6, 2017 Oh the Restore is dangerous. Upon finding some old non coated wrenches and other great scrap art pieces my buddy showed me a stainless sink and some green coated chicken wire rolls. Upon asking the price I couldn't pass them up at $30 for the sink, and $5 a roll for the chicken wire. So now I need to build a wheeled cart for my new chicken butchering station. Yeah and I have more fodder for scrap art Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 6, 2017 Share Posted October 6, 2017 The ones I have gone too are variable; my favorite has things at above new price to absolutely ridiculously cheap----unused roll of HEAVY grounding wire US$5????????. I also got my 10' spiral seamed ductwork for the forge chimney at that one for $4 for 10' section. While the one in the town next door is basically a thrift store full of household junk and very little building materials. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted October 6, 2017 Share Posted October 6, 2017 I keep checking the duct pipe but so far nothing I can use. Also the shelf they keep the 2" black iron pipe. Every time there is a usable piece I grab it because they price that stuff cheap. There always seem to be more small old tools thrown into the mix that usually look like they were off a fleamarket table. I never know if the price is what they want or if it was just on it before so I'll pass on some things but usually if I make up a box or pile of rusty old tools they will price it low. Resale stores like that are just like fleamarkets where you have to just bargain hunt and know what stuff goes for. Quote Link to comment Share on other sites More sharing options...
MG-42 Posted October 8, 2017 Share Posted October 8, 2017 I am currently working on a Hugh McDonald hot meta l roller. With that said my neighbor gave me this today. Now if you are wondering what it is then let me do away with the mystery. It is a home made horse walker. Just look at the pully wheel and chain and sprockets. This is the missing link to my hot metal roller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.