-
Posts
717 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Everything posted by Dave51B
-
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
I woke up this morning, after thinking about it all day yesterday. And I have decided I have buyers remorse. Unless there is another term for what I have....But there was so much stuff there. Call it what you will, but I call it the "Blacksmith Super Bowl" Like I said, I made it back home with no problems. I didn't make that many trips back to the truck to unload the backpack. I just wish now that I would have bought more...I still had cash in my pocket and room in the truck, dang-it......any advice to help me here? Dave -
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
Well...I made it back home....no flat tires and no broken springs. I did run into a guy that was headed out to rent a U-Haul trailer tho....I do wish I would have taken a pic of the guys wife face as the forklift was placing a 350lb. or so anvil in the sliding door of her mini van..... I got to met Josh( aka....NJ anvilman) too....saw a couple of anvil bikes and the anvil stream was said to be onsite, but I missed it somehow. Actually, maybe thinkin' about it ....you guys didn't miss much...............that's a lie, it was awesome! Life is Great today Dave -
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
Well, is anybody going.....? Guess I'll find out tomorrow. See ya there Life is Good Dave -
Minimum effective time to spend at the forge
Dave51B replied to Meadowgrove's topic in Blacksmithing, General Discussion
Ok, sounds good....but I gotta ask.....where are you getting brown paper grocery bags nowadays? Dave -
Minimum effective time to spend at the forge
Dave51B replied to Meadowgrove's topic in Blacksmithing, General Discussion
That makes sense.....I understand what yer talkin' about........ dave -
Minimum effective time to spend at the forge
Dave51B replied to Meadowgrove's topic in Blacksmithing, General Discussion
C-1...if it took me 30 min. to get my coal forge going.....I would have to quit. I haven't timed it exactly, but up to forging temp in 10 min. tops I would say. A handful of homemade charcoal, a propane torch, some air blown in and last sessions coke and I'm good to go....Should I time it? Life is Good Dave -
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
Sooo.......when and where is the IFI meet-up this year? Any group photo planned? See ya there Life is Good Dave -
Have you tried the brass brush trick ,to get color? Dave
-
Thank You very much, I appreciate you taking the time to school me. Dave
-
Ok, I'll show my ignorance here. Is this a take down model? Is the dark wood piece to push the handle pin or a small ceramic sharping stone. And my last stupid question. (for now) If I'm seeing this right....what is the advantage of the take down? Other than you can. Thanks as I've said before..... Dave not a knife maker
-
Restoring an austrian style anvil
Dave51B replied to Obert's topic in Repairing and Modification to Anvils
uh-oh....... -
I'm going to "guess" ice breaker for stock tanks.... Dave
-
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
I received my Quadstate registration pamphlet in the mail yesterday.....looks to be a good 40th year round-up ! I just wish I could stay for the whole thing....Maybe we can con Wayne to put out an IFI member sign in sheet or a can to collect IFI business cards? Now I just need to figure out what day to go....... Life is Good Dave -
SOFA Quadstate 22-24 Sept 2017
Dave51B replied to Glenn's topic in Events, Hammer ins, Where to meet
Me -
Ray Clontz build - Lead weight needed
Dave51B replied to Stitch's topic in Power Hammers, Treadle Hammers, Olivers
Orrr.....you could cast a few extra for the next guy in your original situation.....just sayin' Life is good Dave -
Yip, Vaughn T.....that's pretty much what I found. Shoot, I have even picked up 1/16" rods to give the mig a rest on small stuff. I hope one of the techy guys chimes in to give us a clue of what we're dealing with. Thanks for the feedback Dave
-
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
It's OK, I understand the showroom condition thing. The regular start ups make me feel a bit better. I notice there are no oil stains on the floor under them. Unlike most working tractors, that have an occasional drip. Do you have much trouble with condensation in the transmissions and final drives? In my area, I need to crack open the drain plugs once in a while to let a bit of water out. Yes, I would think it would get a bit fumie in there if ya start all of em'. Most people don't realize it's about a 12 step process to start an old Deere. And each tractor has it's own little quirk. Again, very nice line up and I still think you guys are having way to much fun... Thanks Guys Life is Good Dave -
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
OK....I'm better now. I think I will be able to reply....got the eyes dry and twitches gone....Thanks guys, You have a very nice lineup there. Very nice.....I see the paint is still on the steel wheels. Do you get a chance to take em' out and work em' a bit? To me having those sitting in a barn not working is...wait for it......as bad as having an good anvil for yard art.... such a waste. I heard some rumors of some nice tractors in a shipping container headed Aus. a while back. Hmmm.... Brasso, you best be taking good care of those! I bet they sound good in that metal building....Thanks for the pics by the way. Life is Good ( In Aus. too ) Dave -
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
Hey no fair.......2 against 1.....I'll just add a little meat to the pie...(oh, I love meat pies by the way) I have my tissues handy.....Life is Good Dave -
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
Very nice line up you have there...Do you get to work them any? There is a tractor club, about an hour east of me in Rushville In. that has 2 lineshaft buildings that I would love to belt up one of the unstyled A's to. Not much in life sounds better than an old 2 cyl. JD under load..... Life is Good Dave -
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
With that being said.....Now, I know you guys are having way to much fun, and I am really (can't say PO'ed) jealous. I have to do a search to see how far you are from my brother-in-law......maybe have him go and harass you guys....I suppose next yer gonna tell me they are all 2 cylinder tractors. I do have a few of those here. Life is Good Dave Ok, you guys are safe......he is 28hrs. away....in the ACT......He He....... carry on Dave -
Hi all! A mate of Ausfire hoping to add some content.
Dave51B replied to Brasso's topic in Introduce Yourself
Nice.... Brasso....Sounds like you two are having to much fun. I suppose now yer gonna tell us you get paid to play together. Life is Good Dave -
Peter Wright copy/false stamp?
Dave51B replied to Hairy_eyeball's topic in Anvils, Swage Blocks, and Mandrels
Hey Frosty.....I think you have your polarity backwards. Red to rust (or sacrificial electrode) is the way I have done it for years. 1 tbls. per gallon on the washing soda ,works a treat. Dave- 12 replies
-
- falsified stamp
- barn rescue
-
(and 1 more)
Tagged with:
-
I hope not to cobble up this thread.....but yer right. When it comes to puns.....Frosty, rocks! ds
-
Basically, Either add a gate valve or just point the hair drier at the air supply tube. Charcoal needs very little air supply. There should be plenty of info on the site about this very thing..... enjoy the ride Dave