fat pete Posted November 25, 2007 Share Posted November 25, 2007 I found a new thing that seems to be a common thing amoung blacksmithsmiths...my teacher is also an officer in PABA so he knows all the smiths in the area....well he has to visit some of these guys from time to time..I get to tag along.....what a riot! all of em great people and the common things are "here take that witchya" its like a big swap meet to go and visit someone. We visited a guy the other day and he has alot of thin 12 guage brass...rolls of it...here kid (my kid is 30 years old) he says, to me, take them shears and cut us some brass...he also had thin steel in lengths all kinds of weird things that can help a project for fastners or tabs ... then yesterday my one neighbor pulled in with a 3x6 sheet of 12 guage mild, a bunch of 3/4x2' steel round...and some 1/16th thick 1.5 diameter black pipe (3' sections) all kinds of goodies...so another common thing is that people start to find out what you are doing and they all give ya metal...trouble is finding out what kind it is....no matter bang away my friends FP Quote Link to comment Share on other sites More sharing options...
Pault17 Posted December 5, 2007 Share Posted December 5, 2007 today was a gangbuster for me, I picked up about 40 feet of 3/8 round mild, 12 feet of 1/8 round mild and 8 pieces of 1 1/4 square thicker-than-thin wall square tubing. All of it just took me the time to stop and pick it up off the side of the road. I also get to order a few pairs of tongs from GSTongs, along with a square punch:D Quote Link to comment Share on other sites More sharing options...
texfarm Posted December 5, 2007 Share Posted December 5, 2007 Hello all, A question about what followed me home? I don't have any pictures of it , but we have all seen it. I am talking about a treasure chest full of information every time we log onto I FORGE IRON. The blue prints are what i am talking about. There are a bunch of guys who share a lifetime worth of knowledge free for the taking. Some of the neatest projects, the neatest ways of doing things and all the technical knowledge passed along is better than anything i have seen anywhere. To all the guys who have shared their knowledge with us through the blueprints and everything else on this site, A big THANK YOU from and old texas farmer. Lyndon Wagner -- texfarm Quote Link to comment Share on other sites More sharing options...
Thomas Dean Posted December 5, 2007 Share Posted December 5, 2007 Hey neighbor! Where are ya? I'm in Hallsville, just out of Longview. About 120 miles east of Dallas. Quote Link to comment Share on other sites More sharing options...
skunkriv Posted December 8, 2007 Share Posted December 8, 2007 Followed me home from ebay Meco Weldmaster torch with 5 welding tips, a rosebud and a cutting head. Looks like he had done some silver soldering or brazing with one tip and lit the cutting torch once to make sure it worked. BRAND NEW condition. I have been looking for one of these off and on for a couple years after I had bought a used one from a friend. These torches are no longer made but sure bring good $$ on ebay. I have bid on quite a few and gotten beaten out. Cutting tips are still available from other manufacturers and I recently got what is probably a lifetime supply of various size tips for oxy/propane (ebay). Have wanted a torch to match my existing one so one can be set up on propane and one on acetylene with all parts interchangeable. BONUS-Meco Cutmaster in excellent condition. BIG cutting torch with lock-on lever and uses the same tips. This is my new "outside" torch. Bonus-2 lbs of Harris StaySilv15 silver solder. Near as I can figure from a site where this can be purchased on the web is that this is worth about $140 $2.55/stick Total including shipping $73 Snuck this in over Thanksgiving weekend. You snooze you lose! Quote Link to comment Share on other sites More sharing options...
fat pete Posted December 8, 2007 Share Posted December 8, 2007 hey Mr Dean I am outside of Reading PA bout 60 mi west of philly....however I will be in Texarkana around the first week in March Quote Link to comment Share on other sites More sharing options...
Sam Salvati Posted December 10, 2007 Share Posted December 10, 2007 Here is an old stone grinding wheel that folowed me home this weekend, the stone and stand is in IMMACULATE condition, only the one pedal is bent. Quote Link to comment Share on other sites More sharing options...
Valentin Posted December 12, 2007 Share Posted December 12, 2007 nice wheel i could use one as well 2 sharp my kitchen knives...Most of them don't cut :) Quote Link to comment Share on other sites More sharing options...
the_sandy_creek_forge Posted December 12, 2007 Share Posted December 12, 2007 Hey Sam, If that followed you home for free, you got a steal on it. We had to pay $50 for the one I have in the shop, and that was on a "good" day (read as: blustery cold and nobody wanted to stand around at the auction). A big auction with lots of collectors, that exact grinder in that exact condition can bring upwards of 120 or 130 bucks around here EASILY. Good job! -Aaron @ the SCF Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 13, 2007 Share Posted December 13, 2007 followed me home, heavy bugger. #2N Buffalo Forge Angle and T cutter. These bring anything on the open market? Quote Link to comment Share on other sites More sharing options...
keykeeper Posted December 13, 2007 Share Posted December 13, 2007 Bruce, Not sure of the going rate, but anything less than $75 should be a steal, I would think. IF you don't have room for it, I would give it a home for ya! Maybe some of the veterans here will know more on it. aaron c. Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 13, 2007 Share Posted December 13, 2007 Thanks Aaron, not sure what I'll do with it yet. I'll keep ya in mind. I'd prolly like it if it wsasn't such an ugly color:-) Quote Link to comment Share on other sites More sharing options...
fat pete Posted December 13, 2007 Share Posted December 13, 2007 take a wire brush to it and see what it looks like underneath....i got some stuff like that and it really looked cool....old factories didnt care what color so long as it was protected with battleship paint...wear a resperator device cause i am sure its not good dust... Quote Link to comment Share on other sites More sharing options...
Thomas Dean Posted December 14, 2007 Share Posted December 14, 2007 brucegodlesky, I would be willing to bet that the paint on this piece will have lead in it. be VERY careful if you deside to remove the old paint and repaint with a different color. Looks to weight a ton! Did you get the handle that goes with it? Good score. Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 14, 2007 Share Posted December 14, 2007 It is a heavy xxx! Didn't get the handle, been using a big piece of pipe to test her out. I was looking at a cd that shows BF catalog and it is in there. It was prolly a big improvement over a hammer and chisel. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 14, 2007 Share Posted December 14, 2007 I've seen a short heavy straight shear for sale here recently and they wanted several hundred dollars for it. Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 14, 2007 Share Posted December 14, 2007 Thomas, you back to throwin rocks at snakes yet? Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 14, 2007 Share Posted December 14, 2007 Up until I started physical therapy I was doing great; now after a PT session I'm licking the dust out of my empty pain pill bottle. Unfortunately they assure me it's not fatal. I plan to forge tomorrow if I don't have to make a quick trip to my parents house. Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 15, 2007 Share Posted December 15, 2007 Well, you know all there are things you ain't supposed to do. Got a nice light hammer? Quote Link to comment Share on other sites More sharing options...
BT Posted December 17, 2007 Share Posted December 17, 2007 A Little Giant combination punch and shear that I picked up recently. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 17, 2007 Share Posted December 17, 2007 They said I could do anything as long as it didn't hurt. The problem is that it doesn't hurt till I stop and things start to cool down and stiffen up. Had PT this morning kind of fun when the PT'er said to push against their counter push; but didn't say how much---lifted them off their feet and then I told them that that was my weak arm... Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 24, 2007 Author Share Posted December 24, 2007 These 3 water meter covers followed me home. I am sure there are others uses but all I need is one more and I have some solid feet for an outside work table. Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 24, 2007 Author Share Posted December 24, 2007 There it was, thrown out with the rest of the trash at the curb. Now who would throw away a good Barbie? (BBQ grill). So it followed me home. It has to be a good grill or they would not have put the "Aussie" name on it. Even comes with it's own thermometer. For those that are looking at this wondering, see it as a heat treating device for knives, complete with its own temperature read out device. Quote Link to comment Share on other sites More sharing options...
tbrforge Posted December 29, 2007 Share Posted December 29, 2007 I know (or was told) that these are accessories for an Atlas lathe anyone got any more info? Quote Link to comment Share on other sites More sharing options...
irnsrgn Posted December 29, 2007 Share Posted December 29, 2007 #3 is a follower rest for keeping long thin pieces from springing away from the cutter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.