Jump to content
I Forge Iron

tdaleh

Members
 View Profile  See their activity

  • Posts

    202

  • Joined

  • Last visited

 Content Type 

Everything posted by tdaleh

  1. tdaleh
    Welcome to the fourm. Go to the forge section ago into the solid fuel section and look up JABOD or fifty five forge. Both very easy to make.
  2. tdaleh
    Google metal recycling in AUSTIN TEXAS then pick up the phone and see if any of them deal with the public.
  3. tdaleh
    Always tell my knife students one of the hardest things to do is make you right and left hand work in mirror image with your left and right hand when grinding knife blades.
  4. tdaleh
    Made my first ladles over the hardy hole and step of my anvil. Made some on a wooden stump with a depression carved out. Make a round ring , end of piece of pipe with the inside rounded so it doesn't leave cut marks . Hitch pins and trailer balls make good sinking tools . Plus you can use the Hitch pins and trailer balls to planish over.
  5. tdaleh
    A grocery store carry out cart is my mig welder cart. A press for old time formic a glue taken apart and made into two work benches 30 inches wide and10 foot long. Each table weighs around 350 pounds.
  6. tdaleh
    Look up Blacksmith Association of Missouri . And Kansas Custom Knife Makers Association. Both should have someone in your area.
  7. tdaleh
    Pictures help
  8. tdaleh
    Chris John has some beautiful examples of hammer and chisel work posted in the axes,hatchets, hawks section.
  9. tdaleh
    My Bader B3 has been running fine for 15 years plus . They are very easy to change from small wheel, flat platen, or large wheel.
  10. tdaleh
    Why don't you make up a small billet and weld it up then grind a bevel on one end and etch it . Then you can see what it contrast it has.
  11. tdaleh
    Great explainiation on steps than the photos to show how . Appreciate you taking the time to show us your method.
  12. tdaleh
    Tried to forge a rose a different way than I have made them. Just about got it done an two petals went thunk. Not a failure but a learning experience.
  13. tdaleh
    The end grain picture looks just like the steel I have had red short. The cracks in the end of the bar are just starting to crumble. First time you do it makes you say what just happened . JPH'S first book has a section that tells which steels are red short.
  14. tdaleh

    Camp Knife

    tdaleh replied to Will W.'s topic in Knife Making

    Google knife supplies. Should bring up all kinds places to look for handle material.
  15. tdaleh
    Wasn't there a video of someone making shovels out of railroad track on here and while back.
  16. tdaleh
    Sweet. Nice job
  17. tdaleh
    There is a section on this site called forges. There are some pretty knowledgable people that have gave a lot of time explaining the how and why of forges and burners. There is also a knife making classes section again lots of contributions by knowledgable people . Pull up a chair get your favorite beverage and read . A lot of your questions will be answered.
  18. tdaleh
    Thank you for sharing your work. Great to see something different. Are they copys of original works .
  19. tdaleh
    Fire up the forge grab a bar of steel and experiment. You will be surprised at what you can figure out by doing.
  20. tdaleh
    I would call Roger at Little Giant and discuss this problem. He can tell you the best way to do the repair.
  21. tdaleh
    Get the book Iron Menagerie by the Guild of Metals Smiths. It shows what punches you need to make animals and how to make them.
  22. tdaleh
    The texture on the leaves and petals add to the character of the flower. It's the little things that make flowers stand out.
  23. tdaleh
    When Steve and JPH talk people should listen. Good first knife.
  24. tdaleh
    Down draft welding table. But that only works on smaller projects .
  25. tdaleh
    Smith master, Very interesting website
×
×
  • Create New...