Frosty Posted October 20, 2008 Share Posted October 20, 2008 I had a leather apron made about 15 years ago when I was a bachelor and had some disposable income. While the leather's thick it's soft, pliable and tough as . . . as . . . Leather. I've had 9" grinding disks break and hit me in the chest without even leaving a bruise. Spendy at $125.00 maybe but well worth it. Frosty Quote Link to comment Share on other sites More sharing options...
Mulciber Posted October 20, 2008 Share Posted October 20, 2008 I wear a welder's split leg style apron. I'd have a lot more burn holes in my clothes otherwise! My sentiments excactly. I've been caught smokin my apron a few times. Every time I do I'm thanking the cow that took the hit so that I didn't have to. If price concerns you go down to the local leather supplier and buy a hide. Cut a strip off. Poke a hole in the leather and feed the strip through. Tie a knot in both ends of the strip. This is quick and dirty. Eventually you will want something nicer so either spend the time or the money to add features such as pockets, grommets and buckles. I've saved myself at least as much money as the hide cost in bandaids and burn ointment :) Quote Link to comment Share on other sites More sharing options...
hibjib10987 Posted October 20, 2008 Share Posted October 20, 2008 JUst as a warning i would always advice wearing one. I was grinding once and it just so happened that the spaeks were hitting me in the crotch. well long story short i set my croch on fire. Yeah wear an apron Quote Link to comment Share on other sites More sharing options...
tompdw Posted October 20, 2008 Share Posted October 20, 2008 My girlfriend's father is a retired welder and he gave me a well used apron when I started welding and I use it for blacksmithing as well. Quote Link to comment Share on other sites More sharing options...
Glenn Posted October 20, 2008 Share Posted October 20, 2008 Mulchiber Please go to the green bar at the top of the forum and click user cp. Then add your location and save. We would like to know where in the world you are located. Quote Link to comment Share on other sites More sharing options...
nonjic Posted October 20, 2008 Share Posted October 20, 2008 leather gloves have saved my hands from grinding mishaps a couple of times, My leather pinny might save something much more sensative in the future! I generally wear it if im doing alot of 'cut off' angle grinding (you dont need to stand to the side for the sparks then) or if im doing alot of damascus forging. Heads up to those in the UK, I got mine from 'Aldi' for less than a tenner, with a pair of very servicable welders gauntlets. Quote Link to comment Share on other sites More sharing options...
civilwarblacksmith Posted October 21, 2008 Share Posted October 21, 2008 I tend to use an apron more when forge welding than any other time unless I'm doing a historical presentation. Quote Link to comment Share on other sites More sharing options...
racer3j Posted October 21, 2008 Share Posted October 21, 2008 Great Apron-thick leather, covered pockets,shoulder straps-price belies how good this is Long Leather Shop Apron - Rockler Woodworking Tools Quote Link to comment Share on other sites More sharing options...
kenG Posted October 21, 2008 Share Posted October 21, 2008 Here's a homemade one. I bought the leather as blemished at a leather place for less than $20. A few grommets and I was in business. Even though I'm just getting started I can already say it has saved my leg and pants some anguish. Quote Link to comment Share on other sites More sharing options...
Travis Covington Posted October 21, 2008 Share Posted October 21, 2008 BlacksmithSupply has a decent soft leather with pockets for $12.00 Travis Quote Link to comment Share on other sites More sharing options...
highlander Posted October 22, 2008 Share Posted October 22, 2008 Here's a homemade one. I bought the leather as blemished at a leather place for less than $20. A few grommets and I was in business. Even though I'm just getting started I can already say it has saved my leg and pants some anguish. interesting railing around your slack tub. what's its purpose? Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted October 22, 2008 Share Posted October 22, 2008 I have leather aprons but have not used them in over 9 years. I tend to use them when doing all-day history living type stuff where I will spend the day smithing in costumes that cost too much to burn up. Otherwise I have some shirts and jeans that I save for working in the shop, as they are already messed up. Quote Link to comment Share on other sites More sharing options...
kenG Posted October 22, 2008 Share Posted October 22, 2008 Highlander, As much as I would like to give you some answer about it being special it a plant rack of some sort salvaged and pressed into service as a slack bucket holder. The forge is the gentleman's that got me started and gave me a rivet forge to get me going. I ask him specificly about the bucket holder because it looked like something special i had to have. That top rail just looks useful for something. haha! Cheers, Ken Quote Link to comment Share on other sites More sharing options...
ironrosefarms Posted October 22, 2008 Share Posted October 22, 2008 When I seen the rail on the slack tub I thought it was a safety device to keep ones self from falling in or something :D Quote Link to comment Share on other sites More sharing options...
Shane Stegmeier Posted October 22, 2008 Share Posted October 22, 2008 I rarely wear an apron, I get too hot and or it pulls on my neck and back and ruins me. I do set myself on fire about once a year. I need to make one that fits me properly and and doesn't bother my neck and my back... I would like to wear on when forgewelding and doing damascus work. I can generally put out the flames before I get burned... ;-) And I only wear gloves if I HAVE to... Safety Glasses and hearing protection are nearly always on when i am in the shop, and work boots Quote Link to comment Share on other sites More sharing options...
Glenn Posted October 22, 2008 Share Posted October 22, 2008 Arrange for the apron straps to go over the shoulders, gross in the back, and then attach to the waist. This will take the strain away from your next and be much more comfortable. Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 22, 2008 Share Posted October 22, 2008 The straps on mine attach at the top front, go over my shoulders, cross and then through rings at my waist, then on around to buckle in front. Takes all the weight off my shoulders and is easily adjustable for height. Sometimes I want more protection around my throat and other times lower on my legs. It took two darned long straps but was well worth it. Frosty Quote Link to comment Share on other sites More sharing options...
bruce wilcock Posted October 22, 2008 Share Posted October 22, 2008 now i am retired the apron lays on the anvil where i last took it of the anvil underneth is the only suirface in the smithy that hasnt a layer of rust on it ,i have some ironwork to make for my sons boat ,so i am awating motivation ,to put the apron on again ,i always wore a hide split leg apron 3ft long,and i as someone said a fringe is usefull i always felt undresed without a apron esecialy when shoing. Quote Link to comment Share on other sites More sharing options...
John Martin Posted October 22, 2008 Share Posted October 22, 2008 Lol ironrosefarms, you could use that for tongs if it's tall enough to keep the reins out of the water. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.