rcs7 Posted October 8, 2008 Share Posted October 8, 2008 No problem, I appreciate the heads up. It's hard to tell with some of it. Everything looked the same. I tried to figure out what it could and if would be made with a galvanized coat. There is also a cross link bar to a car or small truck that looks it could be galvanized too, but I fairly certain it's not. Thanks again guys. Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 8, 2008 Share Posted October 8, 2008 If you really want to use a piece of galvy you can remove it by soaking in vinegar for a while or muriatic acid for a much shorter time, if you KNOW what you're doing. If not, stick to the vinegar and be patient, your patience will be rewarded. Frosty Quote Link to comment Share on other sites More sharing options...
Justin Keller Posted October 12, 2008 Share Posted October 12, 2008 Went to an auction today and picked up a few things.. The set hammer and 6lb sledge were $8 each, the three hardies were $9 each, and the box of drill bits was $7 (sizes range from 1/4 to 5/8, all HSS). The Black and Decker toaster oven is for heat-treating, etc. cost me $2 at the local thrift store. The big sledge head and thingy I don't know the name of by the box of drill bits were freebies. Quote Link to comment Share on other sites More sharing options...
irnsrgn Posted October 12, 2008 Share Posted October 12, 2008 thingy I don't know the name of by the box of drill bits were freebies. thingy = wood splitting wedge. or a square punch Quote Link to comment Share on other sites More sharing options...
ironrosefarms Posted October 13, 2008 Share Posted October 13, 2008 I'll try to get pictures but went to a friends yard sale and picked up a milk crate about half full of horse shoes for $1 and another milk crate filled with misc tools and widgets for another $5 including a decent little cross pein, a large punch, about 10 wood handled screw drivers, a medium sized pair of channel lock brand channel locks, 2 pairs of real vise grip brand locking pliers and I don't know what all. The man also deals in scrap metals and I now have him tuned in to hammer heads and such for me, so maybe, just maybe there is more to come? Quote Link to comment Share on other sites More sharing options...
highlander Posted October 13, 2008 Share Posted October 13, 2008 O/A rig for $75, needs new hose but thats an easy fix. Quote Link to comment Share on other sites More sharing options...
John Martin Posted October 13, 2008 Share Posted October 13, 2008 I got 400lb of coal and two post vises. Will get pictures when available. Quote Link to comment Share on other sites More sharing options...
evfreek Posted October 14, 2008 Share Posted October 14, 2008 I bought about 20 lbs of steel round and flats from a garage sale. The flats were precision ground A-2, but I cannot figure out what the round bars are made of. The box was from MSC direct, and the bars are 36", so they must be some kind of tool steel. Does anyone know the color codes for MSC? They don't seem to be on the web page. :( Quote Link to comment Share on other sites More sharing options...
rustyshackleford Posted October 14, 2008 Share Posted October 14, 2008 five sets of swages (top and bottom) plus misc other tools, $60 Quote Link to comment Share on other sites More sharing options...
divermike Posted October 17, 2008 Share Posted October 17, 2008 I just got these sorted, some painted for my shop, some for the group, shaping dies from a machine shop, all tossed in a big box, sold for less than scrap metal price. I figured some of them would make decent shaping tools, fullers, hardies etc. Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted October 17, 2008 Share Posted October 17, 2008 WOW. You made a haul, there!! Some of those will work great for you. Congrats! Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 17, 2008 Share Posted October 17, 2008 Nice haul Mike. Let us know what you turn it into please. Frosty Quote Link to comment Share on other sites More sharing options...
divermike Posted October 17, 2008 Share Posted October 17, 2008 I hope to get an industrial band saw in use and cut some of the larger pieces into manageable sizes, weld hardy posts on them and benefit the group. Just gotta make a new shelf in the shaping tools area now, always a good problem to have. I have some beautiful V blocks, some odd half rounds etc. should be able to make some nice "iron in the hat" contributions as well. Quote Link to comment Share on other sites More sharing options...
KYBOY Posted October 18, 2008 Share Posted October 18, 2008 Heres a nice Champion hammer that jumped in truck with me today..It is nice shape with the mark pretty much 100%..i love these old Champion and heller hammers..They just feel right.. Quote Link to comment Share on other sites More sharing options...
divermike Posted October 18, 2008 Share Posted October 18, 2008 Have you ever taken the time to count how many hammers you have? I was just thinking that if all you guys are like me, we must have 80% of the worlds hammers locked up in our little blacksmithing world, I also think they breed! Quote Link to comment Share on other sites More sharing options...
Ted T Posted October 19, 2008 Share Posted October 19, 2008 Well I did a quick inventory to see how many hammers I had left after a burglary/theft last month. I counted at least 100 hammers of different types and uses. I still have to inventory another one of my shops. The hammer types include: Claw Hammers, Framing Hammers, Rounding Hammers, Roofing Hammers, Cross and Straight Peen (Pien) (Pane) Hammers, Sledgehammers, Welding Chipping Hammers, Rail Road Spike Hammers, Rubber Mallets, Masons Hammers, Cobblers Hammer, Repousse Hammers, Body and Fender Hammers, Club Hammers, and Hatchets. I also found at least 26 top tools such as Hot Cuts, Top Swedges, Square Punches, and Round Punches, flatters, and spring Swedges, and Fullers. I also have some Hardie Tools such as hot cuts, but only a couple of bottom Swedges left. This is all I have left after about 50 years of collecting them. The moral to my response is: Lock your doors, get a big dog, or what ever you have to do to keep burglars out! Ted T Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted October 19, 2008 Share Posted October 19, 2008 Ted, I am really sorry to hear about the burglary. I always keep my shop locked, when I'm not here and working in it. But like they say. "Locks just keep honest men honest". If they want my stuff, they will get it. I hope that never happens. Quote Link to comment Share on other sites More sharing options...
Warrigal Posted October 19, 2008 Share Posted October 19, 2008 Inventory!!!!!!! Certainly I'll put a couple weeks aside for that in my next life. On the hoarding subject. My three year old wants a tree house. No suitable trees in our yard. No cash to go and buy a prefab one ( which I wouldn't do anyway. Not quiet enough cash to buy nice wood to build from scratch. So I'm watching Nat Geo the other day and they start talking log cabins. Of course..... The local ply board factory sells logs..... What else do I need, Hmmmm Axe, got heaps Bowsaw, got several. Adze, got two. Brace and bits, got a selection. Froe (For shingles), spikes ( to hold the logs together) hinges (for the door) Got a forge I can make those. Cool I'll start a thread when I get some pics and keep you guys posted. Carl Quote Link to comment Share on other sites More sharing options...
Sask Mark Posted October 24, 2008 Share Posted October 24, 2008 (edited) The hot cut chisel, cold cut chisel and hardy were recent ebay purchases, I put the new handles on today. The vice, picks, and wire brushes were picked up at a recent garage/estate sale for under $20 total.http://www.iforgeiron.com/gallery/data/500/medium/P1070225.JPGhttp://www.iforgeiron.com/gallery/data/500/medium/P1070226.JPG Edited October 24, 2008 by Sask Mark Quote Link to comment Share on other sites More sharing options...
Justin Keller Posted October 26, 2008 Share Posted October 26, 2008 My landlord said I could take any scrap in the yard that I want for my blacksmithing.. I wandered around a couple of the piles yesterday and this is what I dug out. Quote Link to comment Share on other sites More sharing options...
Blacksmith Jim Posted October 26, 2008 Share Posted October 26, 2008 jkeller, thats great! Lately I've spent a fair amount of time thinking about trying to find a post vise to use. Fantastic! Nice landlord btw.. Quote Link to comment Share on other sites More sharing options...
hammerkid Posted October 26, 2008 Share Posted October 26, 2008 I got me a magenet from a speaker yesterday outta of one of my freinds truck. It was just laying there LOL. Quote Link to comment Share on other sites More sharing options...
KYBOY Posted October 27, 2008 Share Posted October 27, 2008 No pick yet but I got a nice pair of farriers tongs(horseshoe tongs) and a pair of flat jaw tongs for $5 at the flea market yesterday Good find.. Quote Link to comment Share on other sites More sharing options...
Holzkohle Posted October 28, 2008 Share Posted October 28, 2008 Recently picked up the following items from an elderly gentleman north of Columbus,Ga. He said that they had been in his family for a long time. 1. An Armatage Mouse Hole anvil, marked weight 83#, shows considerable use and rust pits, face convex. Based on markings, 1916-1927. Am considering light belt sanding to get a better woorking surface. Comments/suggestions? 2. An English weight marked anvil, 140#, face a bit better than the above. Also considering using a belt sander. 3. A post vise, appros 35#, no spring or mounting bracket. 4. 2 cast iron skillets, one pre 1890, which I hope will clean up well. All of the above for less than $1 per pound. Quote Link to comment Share on other sites More sharing options...
Blacksmith537 Posted October 28, 2008 Share Posted October 28, 2008 I install replacement windows, Last fall I replaced a bunch of basement windows in a church. They had bars on all the windows. I took all of them home and checked the type of steel with a spark test and cut and break test. I was quite happy to find I have 130 pc's of 5/8" round by 40" wrought iron.... The church was 108 years old. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.