Jump to content
I Forge Iron

Fosterob

Members
 View Profile  See their activity

  • Posts

    639

  • Joined

  • Last visited

 Content Type 

Everything posted by Fosterob

  1. Fosterob
    New site looks good. Can not wait for more info there. Thank you. Rob
  2. Fosterob
    Can you tell him to add location to his profile? Thanks in advance.
  3. Fosterob
    I second that and am in the same boat but am having to decide between 15kw and 25 kw. More info would be great.
  4. Fosterob
    Sweet $200 per pound anvil you got Rob
  5. Fosterob
    Ted, Please keep those memories coming. You write good posts. Rob
  6. Fosterob

    new tongs

    Fosterob replied to FieryFurnace's topic in Tongs

    Yes, Those guys are nice, Love the little scythes as wall as all the other little things they are holding. Thanks for showing them Rob
  7. Fosterob

    new tongs

    Fosterob replied to FieryFurnace's topic in Tongs

    Yea, I thought a scythe to be appropriate for one of those guys Rob
  8. Fosterob
    Where is there?
  9. Fosterob
    Welcome Geno. From the pic it looks like a pile of rocks. Does that mean that is what they are? Sorry I could not help it Do you have a forge to try to heat one and see what happens if you hammer on it? Also you should update your profile to show your location, maybe eight people down the road will be able to help out. Rob
  10. Fosterob
    Those were some good videos, they made it look easy. Thank you. Rob
  11. Fosterob
    Can one of you guys give those of us who don't know what a broom winder is a description of how it works? It looks like a nice, well made machine. Rob
  12. Fosterob
    Here is a good description of single and double jack hammers along with some drilling tools and methods. http://www.fhwa.dot.gov/environment/fspubs/84232602/page01.htm They are different from spike maul. Rob
  13. Fosterob
    Hey Frosty, I have a 200 1/2 and can give you measurements of your part if I have it. Mine was set up on a line shaft with a flat belt drive pulley and an idle pulley next to it. Also has provision for a hand crank on the right side but alas I do not have it. I can not view the catalog picture keykeeper posted so am not sure of the flywheel you mentioned? Rob
  14. Fosterob
    I am sorry to hear that. Our best wishes and prayers for you. Rob
  15. Fosterob
    What is the scrap value per ton where the hammers are located, that with the weight will set the price? I hope someone close to them is able to strike while the iron is hot as macbruce said. Rob
  16. Fosterob
    You didn't tell us how you did it? Maybe a pic or two also would be nice.
  17. Fosterob
    Since this is the first you said about having to have sharp outside corner welding is your best option, If you said that earlier I must have missed it. Just be sure that your torch is water cooled, that machine should be fine. You should do a practice piece first, the sharp corner you want might melt into the weld and you will end up with a round corner anyway. Rob
  18. Fosterob
    Welding the piece you want is no problem, I would even say easy. It may warp a bit. My opinion is it is foolish to use the argon$ and filler rod$ to do the job. I think it is better to bend it out of one piece and just weld the corners. Rob
  19. Fosterob
    I have seen several guys who have used an old granny low truck transmission for twisting. Shift gears to get more reduction for larger stock. It will keep your space looking "primative" also. Put your handcrank setup on the input and adapt the output to your square sizes. Rob
  20. Fosterob
    I would have the four sides bent up the 1 1/2" and just weld the short seams. You will use a lot of gas and rod to make those long welds and it will take some good preheat to be able to even tack it. Good luck. Rob
  21. Fosterob
    I for one would like to know more about this, I have a 36v Hilti concrete drill that needs to have a battery rebuild. I think it's ni-cad but need to check. Rob
  22. Fosterob
    generally high strength rebar and ( with an extra line down one side) or welding rebar (w on it) are much more controlled than "normal" rebar. I love the stuff. Rob
  23. Fosterob
    Sorry to not get back to you sooner. Had computer issues and have been off line for almost a week. Ian, I sent you my ph # in an email, if your still around here call me. Rob
  24. Fosterob
    AMAZING, Thanks for that :)
  25. Fosterob
    Is the metal pan cast iron or sheet steel? How big is the forge? 2 ft by 3 ft? I have seen some with a layer of firebrick to keep the metal from burning out. Rob
×
×
  • Create New...