Nakedanvil - Grant Sarver Posted February 3, 2010 Share Posted February 3, 2010 I think you mean "bauble" mate, however don't post any personal info. you don't know how many unsavoury people watch these threads. cheers John. Well, maybe that's how YOU spell it! :blink: OK, you're right, my bad. Sheesh, an Aussie correcting my spelling, what's the world coming to? Well, if someone would like to have some fun with this, I just thought someone could drop by her office, be a hoot, er? You ave "unsavory people" down there too? Quote Link to comment Share on other sites More sharing options...
forgemaster Posted February 3, 2010 Share Posted February 3, 2010 Unsavoury types? There's naught but escaped convicts, vagabonds, and neer do wells in this ear brown land, (i'm not too sure which one I am though) Although there seems to be more of them near Braidwood though. Cheers Phil Quote Link to comment Share on other sites More sharing options...
mite5255 Posted February 3, 2010 Share Posted February 3, 2010 G'Day Mike, Not sure if this helps but on reading the material specs you posted I noticed the Australian Standard they had listed in the end column, so I did some research and found it is a standard pertaining to cast steel.According to a chart I found on another website AS2074 L6B is a reasonably hard cast steel http://www.grahamcam...aterialsCS.html . It might pay to give the foundry another call to see if they elaborate on the process they use to make their anvils and whether they harden the face at all. Cheers Ian P.S probably check on the dimensions and weight too, let us know how you go. iI asked them via email if they harden the face below is there answer the face is not flame hardened but the overall anvil is heat treated to around 320 BHN. .....what is 320 BHN there prices are 97kg - $550.00 including gst 43kg - $236.50 incl 12kg - $132.00 incl Quote Link to comment Share on other sites More sharing options...
calala Posted February 3, 2010 Share Posted February 3, 2010 Ian, BHN = Brinell Hardness Number, tests under the world standards. mild steel is 120 bhn. Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 4, 2010 Share Posted February 4, 2010 320 BHN? That's about what I get from quenched and tempered dog turds! Whassat, about 30 Rc? Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted February 6, 2010 Share Posted February 6, 2010 Well, maybe that's how YOU spell it! :blink: OK, you're right, my bad. Sheesh, an Aussie correcting my spelling, what's the world coming to? Well, if someone would like to have some fun with this, I just thought someone could drop by her office, be a hoot, er? You ave "unsavory people" down there too? mate... pm me the office address and name, and i will organize some flowers and a bauble as a welcome to australia from ....here?...us?...mike from abaqld? mike from brisbane. Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted February 6, 2010 Share Posted February 6, 2010 Dale we don't have a web site as yet but its on the improvement list for this year, I will see the group about getting hammered. This is our logo.This is a photo of our home. i saw the tamworth thing.....ill shout you a page or two, to get you going on the blacksmiths-australia.com site if you like. (free by the way) Send some pics and text and ill whip up a layout, and its yours. regards mike Quote Link to comment Share on other sites More sharing options...
calala Posted February 7, 2010 Share Posted February 7, 2010 Mike, Sorry but I just found your email in my junk box, I will take your offer to our meeting next saturday 13th Feb. cheers John. Quote Link to comment Share on other sites More sharing options...
mat Posted February 7, 2010 Share Posted February 7, 2010 G'day All Mat here from Brisbane. Hobby Smith and Collecting ready for Hobby Smithing (Mr Time-Poor). Did a few courses with Alan Ball @ Logan Village over the past few years. Have a young family, hoping to have the time to meet up with the guys at Eagle Farm in the very near future. Quote Link to comment Share on other sites More sharing options...
mite5255 Posted February 7, 2010 Share Posted February 7, 2010 320 BHN? That's about what I get from quenched and tempered dog turds! Whassat, about 30 Rc? So are you saying its not hard enough Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted February 7, 2010 Share Posted February 7, 2010 G'day All Mat here from Brisbane. Hobby Smith and Collecting ready for Hobby Smithing (Mr Time-Poor). Did a few courses with Alan Ball @ Logan Village over the past few years. Have a young family, hoping to have the time to meet up with the guys at Eagle Farm in the very near future. welcome to come along to eagle farm. see you there if you can make it. Quote Link to comment Share on other sites More sharing options...
Dale Russell Posted February 7, 2010 Author Share Posted February 7, 2010 G'Day Mat , Firstly , welcome to the site Second , remember ta ave lunch sittin' next ta you when you start lookin' around the site Third , This in April ( u'll need ta get in FAST for this , very limited places ) Forth , End of October Dale Russell P.S .. where are all these Banana Benders comin' from? Come on the rest of OZ , we's bein' taken over by Queenslanders :rolleyes: Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted February 8, 2010 Share Posted February 8, 2010 So are you saying its not hard enough it'll be hard enough for what you want mite. look at the lumps of soft un hardened stuff the others use here. if you want to hard face it later you can. Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 8, 2010 Share Posted February 8, 2010 Hard enough? It's harder than mild steel, not as hard as many anvils. Should be fine as long as you keep hot steel between it and your hammer. Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 9, 2010 Share Posted February 9, 2010 You guys are great! Have offers from Double_edge2 and from calala to do something for my daughter in Sydney. Neither is very close to Sydney, but that ain't stopping 'em! From this little forum we end up with friends around the world, ready to do no small favor. Is that cool or what? I take back everything I ever said about yous guys! :P Beers on me! Quote Link to comment Share on other sites More sharing options...
Dale Russell Posted February 9, 2010 Author Share Posted February 9, 2010 Grant , if you miss her too much & decided you wanna visit her, October is the best time . And while your in Sydney you could even pop down to Braidwood for http://www.iforgeiro...__fromsearch__1 October 29 th , 30 th & 31 st ..... 3 rd annual " Get HAMMERED " We need another international ( Richard Thibeau first yr / Ian Lowe second yr ) Just an idea mate Dale Russell Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 9, 2010 Share Posted February 9, 2010 You're just saying that cuz I said the beer was on me, aren't cha? Quote Link to comment Share on other sites More sharing options...
forgemaster Posted February 9, 2010 Share Posted February 9, 2010 So are you saying its not hard enough 320 HBN is plenty hard enough for a hit n Giggle blacksmiths anvil. We forge gear blanks out of 4140 and heat treat them to 277-311 HBN. We aim for 302 HBN which is denoted as a 3.65mm dia impression with our Brinell Machine. That is a brinell machine has a 10mm dia tungsten steel ball that has a load of 3000KG applied to it for 15 seconds. The load is removed and you read the dia of the impression with a brinell microscope (it has a scale across the lens). 320HBN is denoted by an indentation of 3.40mm dia from a 10mm ball with 3000KG load for 15 seconds, to give you an idea. So unless you are going to forge ball bearings cold on it using a 3 ton hammer it should be good. (HBN or BHN stands for hardness brinell number) Cheers Phil Quote Link to comment Share on other sites More sharing options...
forgemaster Posted February 9, 2010 Share Posted February 9, 2010 Hey Grant Don't let Dale pull you into his kind of fight here, we're talking about a powerfull mess O beer here, n is'nt Obama trying to get you blokes to cut down on spending. Don't agree to something that will send the Oll USA broke here now Grant. Phil Quote Link to comment Share on other sites More sharing options...
mite5255 Posted February 9, 2010 Share Posted February 9, 2010 320 HBN is plenty hard enough for a hit n Giggle blacksmiths anvil. We forge gear blanks out of 4140 and heat treat them to 277-311 HBN. We aim for 302 HBN which is denoted as a 3.65mm dia impression with our Brinell Machine. That is a brinell machine has a 10mm dia tungsten steel ball that has a load of 3000KG applied to it for 15 seconds. The load is removed and you read the dia of the impression with a brinell microscope (it has a scale across the lens). 320HBN is denoted by an indentation of 3.40mm dia from a 10mm ball with 3000KG load for 15 seconds, to give you an idea. So unless you are going to forge ball bearings cold on it using a 3 ton hammer it should be good. (HBN or BHN stands for hardness brinell number) Cheers Phil Thanks Phil that sure answers my question Quote Link to comment Share on other sites More sharing options...
IanR Posted February 9, 2010 Share Posted February 9, 2010 Phil, I was hoping you might throw your two bobs worth in, thanks for your answer. Mike,thanks for posting the info about the anvils. Grant, PM me your daughter's details, I'm about 1 1/2 hours from Sydney, we don't go there often but I should be able to post her something Cheers Ian Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 9, 2010 Share Posted February 9, 2010 Phil, as our economy is based on "consumerism", the gummit must curtail spending, we, on the other hand, have a National duty to consume! And what better product to consume than beer? Once used it can't be resold, so you must buy more. unfortunatly, due to our negative balance-of-payments, I must buy 'Merican beer. You understand, I'm sure. "The beer's on me" only applies here in the U.S. of A. Heck, even Mel Gibson drinks our swill! Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted February 9, 2010 Share Posted February 9, 2010 320 HBN is plenty hard enough for a hit n Giggle blacksmiths anvil. We forge gear blanks out of 4140 and heat treat them to 277-311 HBN. We aim for 302 HBN which is denoted as a 3.65mm dia impression with our Brinell Machine. That is a brinell machine has a 10mm dia tungsten steel ball that has a load of 3000KG applied to it for 15 seconds. The load is removed and you read the dia of the impression with a brinell microscope (it has a scale across the lens). 320HBN is denoted by an indentation of 3.40mm dia from a 10mm ball with 3000KG load for 15 seconds, to give you an idea. So unless you are going to forge ball bearings cold on it using a 3 ton hammer it should be good. (HBN or BHN stands for hardness brinell number) Cheers Phil We Americans prefer our tool to be hard as it seems to stand up longer. I'm surprised to hear that you'all have a rather soft tool. While I have never hit my tool with a 3 ton hammer, it has stood up to a lot of pounding on a fairly regular basis. "Judge ye not, a man, by the hardness of his tool!" Many here complain about anvils that are under 500BHN (HRc50). I may not have a 3 ton hammer, but I can dent 320BHN quite easily with my 3 pound. Quote Link to comment Share on other sites More sharing options...
Dale Russell Posted February 9, 2010 Author Share Posted February 9, 2010 Phil , are you sayin' i's drink alot ? Grant , PM me her addy & i'll dig out something & send it up ta her , can't ave the blokes from QLD & NSW takin' all the glory .. Dale Russell Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted February 10, 2010 Share Posted February 10, 2010 Phil , are you sayin' i's drink alot ? Grant , PM me her addy & i'll dig out something & send it up ta her , can't ave the blokes from QLD & NSW takin' all the glory .. Dale Russell in that case maybe we shoulda done a throw in.. poor girl's gonna need a truck to get the stuff home.lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.