M.J.Lampert

ok thanks for clarifying frosty i will use a bearing ball 1/2in ish

lets see you cannot use : nukes, navy, airforce or armored corp and only half the land troops just to make it even M.J.Lampert

just use a French tank they will be able to transport faster that way. they put the 14speed tranny the wrong way they only got 1 speed forwards canada has slacked off on our military for the last while and now we are in a bad spot if any one attacks us but instead of increasing strength they use the take guns from legal owners M.J.Lampert

im "SORRY" are you trashing me and my friends M.J.Lampert if ya wanna attack us remember war of 1812 (British Canada burnt the white house)

who needs a trebuchet when there's tankapults. though ammo would be quite expensive

das looks good just out of curiosity please tell me if its wrong to ask but how much is this costing the customer billy looks nice and of course you have a soft spot for tanks you spent years around them M.J.Lampert

ah the trebuchet built one with a few classmates for a chinse based "renaissance fair i will look around and see if i can find a pic of these (there was 2) this was also the time i built a Chinese Ge and took it to school as I was in charge of the weapons section(this was a mild steel replica that was blunted and okayed by the principal a outdoors kind of guy who likes hunting and fishing) the first in pic is what it looked like M.J.Lampert

ok good to know all i had ever saw told even on here was 1in balls to test. guess ill look through the shop or ammo pouch for some other ones

slingshot ammo would be to small any ways 3/4in min as a side note i use 3/8 and 1/2in ball berrings as slingshot ammo and rocks as target ammo i have killed grouse (wild chicken) with both ammos though the BBearings fly truer

oh and for testing it i have a 1inch BBearing should i also test wit a hammer for ring??

yes turns out we need to go in tomorrow so let you know wednesday night at the latest thanks for the advice my father said to get it even if it turns out cast-steel as we can weld a hard plate on top cast iron would mean no go but all i have now is a 10-20ish skidder rotate pin with 50% rebound(6in from 12in drop that i havent actually tried(K-wool got exposed so not running) so the wieght would be nice though again i may wait for a real anvil and put my money where it would last then again it such a good deal and if its better than 60% rebound i might try it but then again... oh well the voices tel me to go for it M.J.Lampert

KMS Tools and equipment my branch is in Prince George having looked at it online i M.J.Lampert

well theres only one way to find out in canada a cannon of that bore would be illegal (crazy politicians ww1 and 2 artifacts ar now ilegal but dont get me started) M.J.Lampert

waiting to see progress as i might try myself M.J.Lampert

yes i will be going in within the time of the sale we usualy head to the "city" one a month and this is a month long sale M.J.Lampert

yes I designed it myself if you wait till next year I will have one designed that is a better replication of the KV-2 as some of the ratios are incorrect to the actual design and some of the small details but its a school project due in 2 weeks so oh well M.J.Lampert

good job frazer M.J.Lampert

haha your dead they can run way faster than you. dont look at colour(color for yankees) if you see a bear look at shape here is a good link for this Bear Identification (U.S. National Park Service) (nps.gov) also IMO dont bother with bear spray as the bear is usually upwind and all you do is season our self for it. if its a black and it attacks play dead andcurl in a ball covering yourneck if an old grizz climb a tall thick tree a smart man ; "Why you wearing runners?" asks the man with 30lb hiking boots reply "i wish to let the bear eat you in peace, I'll be down the trail about 5 km and be back to grab your gear later" M.J.Lampert

i saw this steel of a deal in a flyer and am wondering if any one has had any experience with these anvils with tax the 165lb would be $447.94 CAD which is 2.71/Lb CAD(2.24USD) will do a rebound test before i get anyways just wondering if this would be a good investment M.J.Lampert

crazy glue!!!!!!!!!!!!! i will bit a little tourniquet on(rubber band) squish the blood from immediately on the spot sop it up and put a thin line of glue on the finger and blow on it then take the tourniquet of within 2 min of putting on the glue holds together and seals the cut then as the tissue grows back it will pop right out no prob M.J.Lampert oh and the neighbour said he would dig out his RR track/ cat spring anvil for some work i did for him

"probably" illegal now but IIRC i read that it the middle ages some blades where quenched by putting a red hot blade through the heart of a prisoner or a slave who no longer serves a purpose to its master. not 100% certain of it butt makes some cents for a blood quench as fresh is required. nowadays one would maybe do a pig if necessary? M.J.Lampert

ok good to know MJForge iwas thinking back to tuning my frosty t and if i remember correct that is a problem of too rich remember frostys numbers are a ballpark you need to tune it more from there raise the tip up. if still too rich trim1/16th off and try again also be sure to clear the mig tip after cutting frosty or mike may say other than me though so don't take me word for word M.J.Lampert

warning teflon tape and propane don't mix if necessary to seal find a paste threadlock also please give a few pics of it running and READ THIS FIRST we are happy to help you frost will be along shortly to let you in formally but till then welcome to the addiction and keep safe (hold steel on cold end and hammer hot end ) (don't set self on fire) (etc.,etc.) M.J.Lampert

ok i get it its not a iron but still this is what ive been doing since march designing a KV-2ish remote controled airsoft tank i am posting this now as i have finally started to 3d print the parts for it i will post more on this as it comes along linked are the 3d cad parts there is thill a few parts but this is about the gist of it asembly https://cad.onshape.com/documents/3d6e5044e6dd29e2a6be4f07/w/0029002f4ad515d90fdb3bb7/e/cc6b99145cab02358f177c85 and the track for it https://cad.onshape.com/documents/101335f7fe2cc17741ad1863/w/98c011e84e5ebc7e6c3a1495/e/2e5a5142fbaf277b05745374 M.J.Lampert

one word: WOW!!!!!!!!!!!! M.J.Lampert (for both alexandr and das)