M.J.Lampert

ok so im looking to build a jabod like piece with this old home made barbeque i would be cutting the grill off and adding adding a blower from the side. should i use the sand on the family property or would it be better to go for about 2-4 km min and get good clay? (where in a weired bannana belt sand with clay all around it and it will be raining for hours aroundand we get like 5 min) anyways what is your opinion on this idea or should i try for a 55 forge M.J.Lampert

these were flattened partly or just carved in? M.J.Lampert

ok thanks M.J.Lampert

so whos gonna be sixth? M.J.Lampert

that makes at least 3 M.J.Lampert

do those have mild an front and back with 2 bolts holding them in place? also would a broken shovel handle work its about 3-3.5 ft M.J.Lampert

Haha thats why i wish to 'self identify' as a goose (-10to-30*C winter and -30to-40*C for 1-3 weeks) and if they let foxes through the border for "Essential reasons" (steaing the other sides chicken IMO) A Fox Crossed The Canada-US Border For 'Essential Reasons' & The Photo Is Everything (canadiancontent.net) they should let a goose migrating to the lower states/mexico through. right??? also we have a military air demenstraition team called the snowbirds Snowbirds - Wikipedia they where at the Vanderhoof airshow in 2018 very simular to the yankee thunderbirds United States Air Force Thunderbirds - Wikipedia M.J.Lampert

mikey yes i aligned it then messed around with hight and got it to well enough M.J.Lampert

sorry took so long to reply i said that wrong as i have no wishes to defraud my father he has great ideas, most of the time i was trying to improve my setup and as i cant use his rr anvil i figured i would weld hard face rod on top of anvil he said no to take a plate and weld clamps to it as shown in pic below i thought great then i started i relized it wouldn't work mentioned to him he said it would work so i pushed through then still loose so was told to heat them with a torch and hit in after finished got 2 heats on a piece of steel about 12 wacks and was already loose. next morn 30 min in and the plate broke off. not saying he's bad just human we all have our mistakes some times also what you mean snow birding, i know snowboarding M.J.Lampert ps heres the pic i said id share before that it looks brighter in pic than actual

sorry wrong thread not sure how though was supposed to be in what did you do in the shop M.J.Lampert

yes and global "warming" also caused Texas to freeze look real M.J.Lampert

in cental bc we say that but wait 5

oops yes its a real nice place and has nice homy feel M.J.Lampert

I haave freinds who used straw bales and staccato glenn my mothers rule is after june long weekend and we get as good or better crops as those who do may 15 M.J.Lampet

so who all wants to go in on this looks like we can get like 6 guys on that one side if we set up a water wheel with inverter we got electric lets do this M.J.Lampert

frosty, in Canada only the first nations can net fish and only in their tribal areas so no I'm not behind the time I'm on the right side of the law can one do it with quarters, also doesn't that count as destruction of legal tender? M.J.Lampert

hey frosty you know how to talk to a fish??? drop them a line. now let that sink in. M.J.Lampert

NZglenn, first i wanna say welcome aboard. i myself was in your shoes not to long ago and remember dont quote what was just said we also just read it, now if its along one and you wanna reference a little piece yes good or if it was on the top / a few pages back yes then its ok but not the one right before. one piece i found very helpful was this 75% deffinitly applies to everyone the last 25 is good for all but especially for curmudgeons or admin How to safely ask curmudgeons for advice? - Everything Else - I Forge Iron also suprised this hasnt come up already READ THIS FIRST - Blacksmithing, General Discussion - I Forge Iron M.J.Lampert

well not in the shop but after watching 2 i got to trim a horse for the first time with my father there to supervise and correct. M.J.Lampert

ok thanks will close up and try. probably turn the other burner to this style as currently it uses 15-20 psi and that means both burners cant run simutaniously frosty you ever go through prince george, BC area with a few spare hours I'd be hounoured to have you come by and tell me how crappy my setup is (need it from more than me to convince my father i need to find a decent anvil not a cast aso ) will throw a 3/4 bolt in and post the results after i finish some more school work M.J.Lampert

ok so i got the bottom of the tip to under 1/32 of an inch off all the way around and got this flame then after running for like 30 sec it turns orange and any backing off results as such I've tried backing off more/ less to about 3/8s from stop but to no avail also tried changing psi from 5-10 still no change any further advice would be appreciated thanks M.J.Lampert

ok will try to fix that. other things came up today so didnt get in the shop today maybe tomorrow??

thank you both for the help mike, looking at it i see that there is a angle between the mig tip and the burner tube frosty, I have backed it off all the way to 3/4 of an inch and had same prob but i think now that the angle is causing that orange flame. if correct let me know, if not tell me no and what your theory is will post more pics later thanks

so I am working on tuning my frosty t burner and it appears to be constantly burning rich i have 3/4 pipe so according to the plans I should be burning lean with a 1/2 inch gap instead of the .5D of 3 /8 but it doesn't even seem to change when it is 3/4 in. off the tubes start. if any one can give me a hand that would be great this pic shows the nozzle all the way down tried a video but didn't upload proper

hey thats gonna be my job to start this summer then il be moving onto the production floor at a shop that makes sawmills M.J.Lampert