Glenn

It followed me home

Recommended Posts

People will think you have a crush on your "Presscious".

Share this post


Link to post
Share on other sites
1 hour ago, JHCC said:

I think from now on I’m going to call it “The Presscious”.

Arc, arc, arc.

Frosty The Lucky.

Share this post


Link to post
Share on other sites
3 hours ago, Frosty said:

Arc, arc, arc.

Nasssty arcses!

Share this post


Link to post
Share on other sites

D8T; are you going to modify them into twisting wrenches? I like the "Ford type" ones for reverse twists as they generally have narrower contact surfaces.

Did they come from the South High Flea Market?  

Share this post


Link to post
Share on other sites

I met my dad today and he brought me in a nice haul of goods. 

This cast iron belt/disc sander frame. Ended up paying $25 instead of the $50 asking price. image.thumb.jpg.a290d37b7fa7c7d0173f1b6d4b387721.jpg

 

Some oil cans. 

image.thumb.jpg.0884951d0a86733af11267b9c67f2100.jpg

 

drill index full of bits, most look un used. All the paper packs have drill bits in them. Some look like they may be for a mill. All new. Cigar box will be nice for organizing. 

image.thumb.jpg.9cb56232958885310874e45a90c4aedb.jpgimage.thumb.jpg.6e3082ced36bc87481dbf264d604f53e.jpg

 

3 combination squares, big clamp, tap wrench, Swedish needle file set.  Clamp is drop forged USA made. Don't remember what brand was. It's heavy duty though. 

image.thumb.jpg.644676a5c2d4b8b2d99114c211553637.jpg

 

blower, might be a nice replacement on my coal forge, maybe not. 

image.thumb.jpg.8aa7b0285013087b9899b142b27737ef.jpg

 

Some files and a screw driver or two. A nice looking bench grinder. image.thumb.jpg.58c646964a833115cfb127080bc51621.jpg

image.thumb.jpg.870bd07da783a8244f2d2758a25b74d7.jpg

 

there are two boards, resin/epoxy with some kind of fiber in it. Not sure exactly what it is though.

image.thumb.jpg.cdcc8c7856e879bfa71c19415523e70e.jpg

Sorry for such a big post, it's stuff my dads been getting for a few months for me. If needed feel free to turn into its own post. Didn't think about that at first. 

Share this post


Link to post
Share on other sites

Nice haul Pr3ssure, KUDOS to your Dad. That's just a standard drill index but you'll need a 1/2" drill for larger than 3/8" bits. Boxes of NEW drill bits too! Brother you have some golden trading stock there.

Do you know how to sharpen drill bits? A medium and a fine wheel on that little bench grinder is perfect but you have to  know how. Get someone to show you, you'll go through all your bits trying to figure it out. Honest.

Frosty The Lucky.

Share this post


Link to post
Share on other sites
On 6/20/2019 at 1:16 PM, ThomasPowers said:

D8T; are you going to modify them into twisting wrenches? I like the "Ford type" ones for reverse twists as they generally have narrower contact surfaces.

Ebay as Father's Day gifts.  There's a youtuber who made a limited run of steel and brass reproductions, but I wasn't willing to pay the premium.  My wife picked them up on ebay for around $30 for both with shipping.

I'm not sure what I'm going to do with them.  The Ford wrench has a tight spot about 2/3 to 3/4 of the way to full open on the jaws.  I'm hoping I can clean that up and resolve it.  A cursory glance of the teeth and the thumb wheel don't show any damage.  I'll probably do some file work on the Ford wrench to clean up some casting flash and work on some dents in the lower jaw and mushrooming of the sides of the lower jaw.  After that, a nice soak in evaporust.  I'm on the fence about cold blueing it or finding a gunsmith to hot blue the wrench.  If it's functional, I'll use it for something.  If not, it'll be a wall hanger.

The smaller one opens and closes as smooth as glass.  It just has some mushrooming around the hammer head, the jaws and dent on the metal ring just above the wood where somebody was hammering on it.  I'll clean it up as best I can and if I can get it apart, evaporust and refinish the handle.  Otherwise clean it up and leave it alone.  Either way, the little one will probably end up in my desk at home or on my desk at my office.

I hadn't thought about twisting wrenches until now.  I may troll ebay for some wrenches that are functional, but poor condition for that.

Share this post


Link to post
Share on other sites

I figure my uncle knows how to sharpen them. I've watched some videos on it so I have the idea. I'll need to get a good plate with some angle reference on it. 

Share this post


Link to post
Share on other sites

Picked up a post vise off CL for $75. 5 inch jaws. Been looking for one for a good while now. Anyway ended up talking to the gentleman for a good hour. Come to find out hes got a rare lung disease so hes trying to go through some of his stuff that he dont want to end up going to the scrap yard. When he was able he restored old cars. He ended up giving me a bunch of model T parts for free. 2 front axles a drive shaft some suspension parts and a box that I haven't gone through yet. Also offered me a large plow but I couldn't load it myself. Tried to give him more money but he wouldn't take it. Told me to find them someone that would use them and put the money towards my blacksmithing. Good guy I plan on going back just to visit sometime soon.

20190621_152600.jpg

20190621_160420.jpg

Share this post


Link to post
Share on other sites

Pay it forward!  It's a gift when you are given time to see some of your stuff goes to people who will use and appreciate it!

How's the screw on that vice it looks like a nice one?

Share this post


Link to post
Share on other sites

Screws in good shape. One side of the mounting bracket is broke off but that's no biggie. Just got back ain't had time to look for any markings on it yet. I will definitely pay it forward 

Share this post


Link to post
Share on other sites

Cleaning up behind my Dad's shop and found the iron tire from an old 4' wagon wheel I found on the Pine Ridge Indian reservation, outside Wanblee S.D. in the early 70's when I was working for a custom combiner. It was the complete wheel then, but all the wood has rotted away since. Is this wrought iron, how do I tell? 1 3/4 x 1/2

IMG_0191.jpg.155ed5431d4fae2f4c4fa14eec8602b3.jpg

IMG_0190.jpg.0c9b0d9de59312029d6196cb672008d8.jpg

IMG_0193.jpg.b2a76f3dfe3f4a74e44dcff584d3fbc4.jpg

IMG_0189.jpg.b068aee9ebaaa6ed1aa2a57b9923b8ae.jpg

Share this post


Link to post
Share on other sites

Am i missing something with this South High flee market? Should i make the 45 minute drive to Columbus for it? 

Share this post


Link to post
Share on other sites
2 hours ago, Les L said:

Is this wrought iron, how do I tell?

Cut halfway through and bend it over at the cut. WI has a distinctive fibrous structure that will look like a broken green twig. 

541DB54E-C931-4A27-A0C5-C9DC5976E4D6.jpeg

Share this post


Link to post
Share on other sites

Picked this up at the tailgating area.at the NEB Spring meet two weeks ago.  I have been looking at buying a new, modern shear but nothing they make now can hold a candle to this beast.  It has been requested that I paint a googly eye and add a fang encrusted maw to personalize it.  This will be the first time I paint an old tool.

DD7C5C78-1511-4A82-B913-F914E2AEDFA1.thumb.jpeg.1b803e3acda6e075473b5375f6057f42.jpeg

Share this post


Link to post
Share on other sites

That’s a beauty, congratulations on the find

Share this post


Link to post
Share on other sites

Nice!  I wouldn't paint it though - I like the experienced look.

Share this post


Link to post
Share on other sites
8 hours ago, Les L said:

how do I tell?

 

8 hours ago, JHCC said:

Cut halfway through and bend it over at the cut

I was informed by Steve Sells when I visited that the wheels may want to close in on the cut so be careful on the first cut. 

Nice score Lou. It's an Edward shearhands. 

Share this post


Link to post
Share on other sites
6 hours ago, Lou L said:

Picked this up at the tailgating area.at the NEB Spring meet two weeks ago

Glad I was there to assist in the ribbing... eh, excuse me, I meant respectful price negotiations.  You are going to love it!

For folks that wern't there, when Lou says he picked it up, he means that literally.  He picked it up, by himself, to estimate the weight!

Share this post


Link to post
Share on other sites

Buy a couple google eyes at a craft store and use museum wax to stick them on. Maybe draw lips with lip stick and fangs with white grease pencil so it'll wipe off. 

Personally I have no problem painting tools.

Frosty The Lucky.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.