May 26, 200917 yr hey guys ive got a little question i need to ask,im interested in small presses and i was wondering if its possible to make a small press some how using an electic motor to force the ram down thanx Mike ps:ive searched it and cant find ANYTHING on the subject
May 27, 200917 yr Ray Clontz drives a hydraulic jack with a motor on a homemade press. You can find pictures with descriptions in the photo gallery on forgemagic.com under "ptpiddler".
May 27, 200917 yr Author Ray Clontz drives a hydraulic jack with a motor on a homemade press. You can find pictures with descriptions in the photo gallery on forgemagic.com under "ptpiddler". yes ive seen this press before but i meant a press with only a motor no jack or cylanders or anything else just a motor.but thanx for telling me because i couldnt remember what the website was called but now i do. usual is to have the motor spin a hydraulic pump Can you explain what you mean if posible? thanx Look at the electrified screw press using a friction drive. where do i search for it?what website?
May 27, 200917 yr Electric motors work by spinning an axle. How do you intend to translate this into longitudinal (forward-and-backward) motion 'with only a motor no jack or cylanders or anything else just a motor'?
May 27, 200917 yr DMike: I googled Friction Drive Screw Press and almost all the hits on the first page were applicable. May I suggest you do likewise. I have to get ready for a road trip back June 1st. I have a friend who is a coiner and has an old FDSP that I have used---bought on the used machinery market and much cheaper then the new imports and better made to boot!
May 27, 200917 yr DM, another thought, if available to you, is to enroll in an industrial arts class. It may teach you some basic physical mechanics to learn how simple machinery works and doesn't work. Electric motors are generally useless without some sort of mechanics; hydraulics, pulleys, gear boxes etc. to drive. Otherwise, they just sit and spin.
May 28, 200917 yr Author DM, another thought, if available to you, is to enroll in an industrial arts class. It may teach you some basic physical mechanics to learn how simple machinery works and doesn't work. Electric motors are generally useless without some sort of mechanics; hydraulics, pulleys, gear boxes etc. to drive. Otherwise, they just sit and spin. oh sorry i may have explained it a bit different then some people may know,i mean ive got a motor and alot of scrap metal and a jack but i wanna see if i can make a press with only the motor as a driver,even if it runs pulleys or gears or wateva it needs i just dont wanna use a jack or hydrolic cylanders. Any other ideas?if there is no way to do it i can use my bottle jack if needed i just need to know how,im very keen on the press that has a motor running the hand pump up and down with a cam but im not sure if ill get it right.
May 28, 200917 yr What's wrong with a jack or cylinder? Hydraulics are the best way to opperate a press, if you are against them then what did you have in mind for your press mechanism? You could build a screw press or an arbor press but I don't see why you would want to power either of them with an elec. motor. What are you wanting the press for? forging or just a shop press? Try searching on google for homemade presses or something similar, then you may get a better idea of what you want to build or atleast get a better understanding of different style presses welder19
May 28, 200917 yr A little off topic, but somewhat interesting. The company I work for manufactures brake presses. We use what is called a planetary roller screw for each side of the ram of the press brake to drive it down. It gives us quite a bit of available tonnage, plus a very quick cycle of the machine.
May 30, 200917 yr Author What's wrong with a jack or cylinder? Hydraulics are the best way to opperate a press, if you are against them then what did you have in mind for your press mechanism? You could build a screw press or an arbor press but I don't see why you would want to power either of them with an elec. motor. What are you wanting the press for? forging or just a shop press? Try searching on google for homemade presses or something similar, then you may get a better idea of what you want to build or atleast get a better understanding of different style presses welder19 I dont have anything agains jacks or cylanders i just wanted to see if it was posible,ok ive changed my mind about the electric motorized press thing,im ganna use the jack i have,my press must be small under about 25 -30 kgs or less and it will be for forging and hopefully for Damascus if fast enough,i know people in the past have said i must use an air compressor but the truth is ive got one buy its old rusty and im scared its ganna explode if i let it built up preasure.ok ive sort of got an idea of how to make it and ill try explain it. The press will be an H style press with the jack in the middle under the bar that goes up and down i want the jack to have my motor atached to it running the hand pump up and down making it pump the ram up very fast.If you have any changes or tips to make it better and faster fell free to comment.The press in the pic is what i wanna make.
May 30, 200917 yr Just make sure that you build the frame twice as strong as you think it needs to be. If youve no experience with presses you probably cant get you head around just how much energy is stored up in the press frame. It can go bang very easily.
May 30, 200917 yr Author Just make sure that you build the frame twice as strong as you think it needs to be. If youve no experience with presses you probably cant get you head around just how much energy is stored up in the press frame. It can go bang very easily. Yes thanx,i plan to make it from I beam and square tubing and on every join or weld ill have another piece overlapping it so i know it wont break
May 30, 200917 yr Phil Patrick: Thanks for the information! I Googled it and found a lot of information. They certainly would be a good basis for a press. Thanks again!
June 1, 200917 yr Author Arc welding,Mig welding,gas welding,soldering and still trying to get forge welding right.why?
June 1, 200917 yr Arc welding,Mig welding,gas welding,soldering and still trying to get forge welding right.why? im guessing coz if you get it wrong you could maim or kill yourself, or someone else if they are nearby if the frame lets go due to substandard welding. At this stage I think your time and resources would be much better spent on getting the basics down (hot forge, decent materials, 15n20 etc) than making a press. just my 2c.
June 1, 200917 yr Why Mike? If you have to ask you don't know enough about welding to try building something as serious as a press. Frosty
June 2, 200917 yr Author Why Mike? If you have to ask you don't know enough about welding to try building something as serious as a press. Frosty What are you talking about?it doesnt mean that because im good at welding i must also know how to design a press.
June 2, 200917 yr I meant exactly what I said. If you have to ask why it's important you are NOT a weldor anywhere but in your imagination. Frosty
June 2, 200917 yr Gotta agree with Frosty on this one If you KNOW what you have to have for constructing the press and what it takes for proper welding THEN you are a welder. Finnr
June 3, 200917 yr Author Ok this is seriously not making sense, the question what about making an electril press and then i changed my mind and decided im gana built a jack press, now where did welding come into the story???????
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.