Bentiron1946 Posted January 5, 2013 Share Posted January 5, 2013 Nice little rod shear, I got one similar a few years ago and it sure is nice for cutting hot rolled rod for making rivets, brass and copper too for the same purpose. Those are some nice used jack hammer bits, some unusual shapes. Quote Link to comment Share on other sites More sharing options...
queensdudleyanvil Posted January 5, 2013 Share Posted January 5, 2013 Hi Will, You were right! After a little oiling it cut through a large nail like nothing and will take up to 3/8" stock. I've taken to buying and cleaning old tools like this for possible resale, but this I am going to restore to original and keep. I'm going to keep checking sales to see if I can find it a mate in the way of a vintage sheet metal shear. Thanks, Kent. Quote Link to comment Share on other sites More sharing options...
Ridgewayforge Posted January 6, 2013 Share Posted January 6, 2013 Sam, when you in town for? And that's quite a little ways south there! Queens, I'm actually more towards Frederick than Woodbine, although one of my friends, a smith, is in woodbine. Quote Link to comment Share on other sites More sharing options...
joshua.M Posted January 7, 2013 Share Posted January 7, 2013 finally get to post here!!!! YAY!!!!! I heard of an old blacksmith shop through some people in town using the TPAAT the abandoned shop was wayyy out of town here and went for a little trip to see it, drove in the lane way and there was a house so i went and knocked.... they had sold the contents of the shop (sad me) until the elderly gave me the name of an older guy who bought lots of the stuff, so after lots of cold calls and wrong numbers searching through the phone book, i found him!.... he parted it all out.... :( BUT! he had some other stuff for sale because he was just retiring, so i got: 75lb "Canadian" farriers anvil 2 burner N.C tool forge with all lines and new lining 10 pairs of tongs 12 hammers 5 rasps (3 given to dad for horses) tons of misc farrier clippers, dividers,hoof stands and hoof knives for dad 8 misc files 15 horseshoes (new, perfect for hearts) hardie for anvil swivel base vice with hardie post welded on home made shoe vice (great for filing bevels) small bench vice aluminum farrier tool box (given to dad) tong/tool stand hand crank grinder lead ladle 500 horseshoe nails COST: $200 it is a very happy day Josh Quote Link to comment Share on other sites More sharing options...
joshua.M Posted January 7, 2013 Share Posted January 7, 2013 sorry, they all uploaded sideways and their crappy iphone pics Quote Link to comment Share on other sites More sharing options...
Bentiron1946 Posted January 7, 2013 Share Posted January 7, 2013 Looks like your got a good deal on all that stuff Josh, not a bad deal at all. :P Quote Link to comment Share on other sites More sharing options...
joshua.M Posted January 7, 2013 Share Posted January 7, 2013 Looks like your got a good deal on all that stuff Josh, not a bad deal at all. :P ya, now i need to figure out how to run a gas forge :P Quote Link to comment Share on other sites More sharing options...
queensdudleyanvil Posted January 7, 2013 Share Posted January 7, 2013 Congratulations Josh. I like the back story of how your dogged perseverance paid off. Enjoy. Quote Link to comment Share on other sites More sharing options...
joshua.M Posted January 7, 2013 Share Posted January 7, 2013 PLug it in and turn it on, then put steel in it LOL i think it needs a new regulator, the one on it is pretty corroded, i am getting it checked out by my farrier who runs the same brand (1 size upp from mine) before i light it up Quote Link to comment Share on other sites More sharing options...
joshua.M Posted January 7, 2013 Share Posted January 7, 2013 ya, im kinda sketchy around compressed gasses, especially flammable ones, and i've never worked on one of them Quote Link to comment Share on other sites More sharing options...
Will. K. Posted January 15, 2013 Share Posted January 15, 2013 Scored ~15' of 4340 barstock. It is just the right size to make dies for my Kerrihard power hammer. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 15, 2013 Share Posted January 15, 2013 Went out to the scrapyard last weekend and found the final piece for another "no weld" hammer rack---a length of heavy duty 2" hole "hardware cloth". Teamed that with a home built inversion system and a couple of lengths of black pipe and I had a 210 spot tool rack with a 5' slot for larger items like stakes. Got my armouring stakes dug out and put on the rack and 38 hammers that go with them. The larger hammer rack with the 78 hammers went out in the forging shop---ran out of room on it so I built a smaller tooling rack over by the forge for the top swages and hardy tools. Quote Link to comment Share on other sites More sharing options...
Will. K. Posted January 15, 2013 Share Posted January 15, 2013 The 4340 steel showed up today! It arrived with a few gouges/nicks from the shipper but most are in areas that can be machined off. I got the big saw were I work to slice me off two 4-3/16" chunks and cut the rest in half to make it easier to move and fit in my truck. Quote Link to comment Share on other sites More sharing options...
Walker's Forge Posted January 16, 2013 Share Posted January 16, 2013 Went to a free garage sale a couple weeks ago :D . Picked up a heap of items including a bucked of charcoal, and stuff for the house. Best find was a German made electric two speed blower. Its not a blacksmithing blower but once I build a frame to mount it to it will work very well. When I got home I turned it on and it purrs, great find. Quote Link to comment Share on other sites More sharing options...
LastRonin Posted January 19, 2013 Share Posted January 19, 2013 No pic, but a 6" wide forklift fork. the upright is 24 1/2 " long and 2" thick. The horizontal is 1 3/4" thick for 18" and then tapers to the end 36" further. Free from the Equipment Rental place we use for work. Quote Link to comment Share on other sites More sharing options...
crazeyladyfarms Posted January 23, 2013 Share Posted January 23, 2013 I was at a flea market today and found this hammer . But there was a Lot more included is some photos the flea market is at the junction Of 69 and 59 going to Grove Ok called the strip mall Quote Link to comment Share on other sites More sharing options...
Pug}{maN Posted January 23, 2013 Share Posted January 23, 2013 What where some prices and sizes on the anvils? Quote Link to comment Share on other sites More sharing options...
ianinsa Posted January 23, 2013 Share Posted January 23, 2013 I'm surprised that your veichle made it home, I don't need any of that kit but I've never let insignificant facts like that stop me buying more! ;) Quote Link to comment Share on other sites More sharing options...
crazeyladyfarms Posted January 24, 2013 Share Posted January 24, 2013 What where some prices and sizes on the anvils? they were 300 to 400 lbs and 375.00 and up. And the only reason my little purple truck was not loaded full was my billfold was empty or almost Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 24, 2013 Share Posted January 24, 2013 Visited the scrap yard yesterday mainly to pick up some bolts; they are getting too expensive at the hardware store and I fing unused ones in someone's garage stash dumped at the scrap yard on a regular basis. I found my bolts, a nice piece of gridwork mounted in a frame to make a small hammer rack from, a working nice sized drillpress vise in very good condition, a piece of real wrought iron, some usable scrap and finally a bracelet stake dumped with the rest of the junk. Well worth getting grubby for! Scale was busy so I accepted an "eyeball price" of US$8. A bit high but the vise and stake were both worth several times as much...had to make two trips to carry all the stuff out to the truck. Quote Link to comment Share on other sites More sharing options...
Ridgewayforge Posted January 27, 2013 Share Posted January 27, 2013 Today I traded a piece of damascus and two 1/2" Stainless rods for about a dozen cut pieces of leaf spring, half a dozen cut up pieces of coil spring 1/2" round, 4 1/2 ' of 1/2 square mild, and 17 railroad spikes. Also included was 7 files. The largest was 20" long and the shortest was 10". Quote Link to comment Share on other sites More sharing options...
KYBOY Posted January 29, 2013 Share Posted January 29, 2013 Got some heavy square tubing, angle irona and traded for this 55" saw blade today. Its .182 thick on the edge and close to .225 in the center..Did a little testing on it..i think its something like 1080+nickle.. Quote Link to comment Share on other sites More sharing options...
eric sprado Posted January 29, 2013 Share Posted January 29, 2013 Sure it's not L6?? Lots of dandy edge tools have been made from old circular sawmill blades!!! Quote Link to comment Share on other sites More sharing options...
John McPherson Posted January 29, 2013 Share Posted January 29, 2013 L6 is basically 1070 with a little Manganese, Chromium, and Nickle added, so bumping up the Carbon from 70 points to 85 would be well within reason for saw blades. Ought to make some awesome bowies. http://www.hudson-metals.com/pages/technical/hmcL6/hmcL6.html Quote Link to comment Share on other sites More sharing options...
tomhw Posted January 30, 2013 Share Posted January 30, 2013 Got some heavy square tubing, angle irona and traded for this 55" saw blade today. Its .182 thick on the edge and close to .225 in the center..Did a little testing on it..i think its something like 1080+nickle.. Does it have carbide incerts? If so you can sell the carbide and use the rest of the for blades, tools, gardening tools, shears, and other hardened things. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.