Jump to content
I Forge Iron

anvil repair?


Recommended Posts

For what it'd cost to replace the horn on that old lady you could buy a new anvil. Forge welding that much without ruining the rest is no trivial task. Mechanically attaching a horn wouldn't be much more than cosmetics. It appears to have a good face and will make a good working tool. You can find or make cones and bicerns to do all and more than a horn can. 

Frosty The Lucky.

Link to comment
Share on other sites

You'll probably be happier using this one to forge on and the ASO for it's hardy and pritchel. I rarely use the horn myself except as a bottom fuller to help control the direction steel draws. I turn rings, scrolls, hooks . . . most everything on the face or over an edge. I rarely work sheet stock so don't planish on the anvil. 

Frosty The Lucky.

Link to comment
Share on other sites

If you put your anvil and mine together, we'd have one complete Wilkinson! (mine's missing its heel)

Is it just me, or does it seem like Wilkinson anvils have a disproportionately large number of broken heels and horns compared to other anvil manufacturers? Perhaps they used a different technique for their welds that wasn't as successful?

Link to comment
Share on other sites

Horn doesn't need to be attached to the anvil!

RRHammerstakeanvil.jpg.2ce6a833a6ab54d6c298173447f91b22.jpg

And I would say the older anvils tend to have more missing parts---sort of like blacksmiths!

William Fosters also tend to lack extremities; Mr Postman told me that they tended to use a lower grade WI in them and I wonder if that also contributed to failures at the weld.

Link to comment
Share on other sites

The top was a RR spike driver; my avatar picture is of me forging the shaft from 2.5" sq stock using another smith's 200# chambersburg.

here's another made from another non-standard sledge head:

stakeanvilsmallcrop.jpg.a5e1f9acb5240db0cc02cd116e6c9cad.jpg 

Much shorter/smaller shaft.

I hope to make a bunch more of these in the near future.

Link to comment
Share on other sites

RR sledge would have been my guess. I've been eyeing some pickaxe/sledge type tools to use for a bickern.  Yeah that looks to be a hefty chunk o' steel you're forging. I was curious as to what you were making in your avatar pic.

Pnut

Link to comment
Share on other sites

I've a number of other RR spike mauls both the round and the octagonal/square ones.

I probably got the idea to modify the heads from a fellow at a  SWABA, (Now the NM Artist Blacksmith Association), meeting who took a hand sledge with the 45 deg flats on the sides and using a hydraulic press turned it into a double diagonal peen hammer---one end one way and the other the other.  Took two bites of the press for each end and left a beautiful rounded peen face to boot.  Got me thinking and I have been collection odd hammer heads ever since.  Picked up the warwood and an iron city and one with the  Woodings Verona Tool co. logo on it.  Never paid more that US$5 for a loose head at the fleamarket.

Link to comment
Share on other sites

I haven' been to Caesar's Creek in decades. I once bought a hand forged, WI & steeled, T adze there; beautiful save that the dealer had hafted it and beveled it on the wrong side to use as a hoe...I twisted the knife a bit by commiserating with him how a "previous owner" had lowered it's worth by 50% by doing that. (Telling them they done wrong just gets their back up; blaming someone else for dropping the price by 50% and explaining why gets them to *listen*!)  

I also bought a hand forged smithing hammer there once. The dealer wanted too much for it as "it had a new handle in it" Well the handle was so poorly done that I pulled it out and handed it to him and asked how much for just the head?

Link to comment
Share on other sites

I have a bunch of flea market stories like that. You need to be an amateur psychologist. I used to sell at a flea market when I lived in Clarksville TN. I used to get there as the sun was coming up and sometimes sell everything to the other dealers. I made good money off of pretty much yard sale junk.

Caesar Creek is great. They give you a map at the entrance. There's also a glider school nearby there. Two reasons to spur me into abandoning my champion homebody status.

Pnut

Link to comment
Share on other sites

There used to be a good fleamarket at a county fairgrounds between Columbus and Tip City Ohio; we used to stop by it on the way to SOFA meetings. We carpooled and so a bunch of us would bail out and scatter.  Working the fleamarket as a group is too rough on friendships---like my friend being 4 feet ahead of me and finding a mint condition wagon tongue vise for US$25 or even worse when a friend finds a terrific buy and asks you to loan them the money to get it!

I wear a distinctive hat, (red felt with horns and back then a tail) and I learned to take it off and stick it under my arm when I found a good spot I wanted to peruse a while.  My friends said I disappeared when I took the hat off.

Link to comment
Share on other sites

Ceaser's Creek is about a 20 min drive from my house. I have not been there nor Turtle Creek in years. There used to be an Amish flea market across the road from Ceaser's creek, that was the place to buy tools at. I remember i got a 32 oz balpeen for $2 i think. 

Interesting little tid bit, the Ceaser from Ceasers Creek, the lake, flea market, town, and stream are named after was a run away slave. If memory serves correct he fought alongside of Blue Jacket. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...