Jump to content
I Forge Iron

New to this forum


unimog

Recommended Posts

I am new to this forum. Used to work in a black smith shop many years ago as a teen apprentice. There was the master black smith and one other smith and 3 teen apprentices. I worked on ag equipment over the road trucks and also in the black smith when needed. The black smith work was mostly repairs to equipment, horse shoeing, steel tire replacements etc. There were no power hammers but the black smith would use us  to get the most out each heat. He would line us up at the anvil with sledge hammers and set the tempo with his smaller hammer to work the hot iron. If we were slow to hit it there would a lot of "comments" from him. Started out when I was 15 and worked for room and board plus a very small salary.

Link to comment
Share on other sites

Good Morning from the left Coast,

Welcome!! There are an awful lot of people here, with different backgrounds. All with the same focus, how to get a little knowledge, continually. I worked with a Danish fellow who worked in Chain making Shops in Europe, Logging Camps after coming to Canada, had his own Blacksmith Shop for a lot of years. He was a quiet man, even quieter when you made a mistake!! Sure full of ability though!!

Enjoy the journey.

Neil

Link to comment
Share on other sites

Neil, thank you for your comments. Small world I grew up in Denmark and worked at the black smith shop in the mid 1900's. After my apprenticeship I studied to be a mechanical engineer and worked for a few years in Denmark as an engineer before immigrating to the US.

Link to comment
Share on other sites

Welcome aboard, glad to have you. Ah HAH! I'm glad I took some time before replying, I mistakenly thought you served a real apprenticeship in Maryland USA. It was taking me some thinking time because I didn't think anybody offered real apprenticeships in America. Mid 20th cent. Denmark fits nicely in my thinking of current smithing. 

Do you have any pictures of your old Master's shop? Any stories you'd like to share? 

Frosty The Lucky.

Link to comment
Share on other sites

Sorry I don't have any pictures of the shop. The shop was a separate building about 50 ft by 50 ft with the forge located in the middle of the shop. The anvil was huge perhaps in the 400 to 500 lb range. There were work benches with several post vises and an area with overhead pulleys and belts driving drilling machines and grinders etc. The upstairs had room for storage and there were racks outside for lengths of steel bars

Link to comment
Share on other sites

Bummer, we LOVE pics. Oh yeah, that sounds like a working blacksmith shop alright, a real town smithy. No need for power hammers if you have 4-5 experienced teenage strikers. 

Was it a place local people gathered to talk and gossip, perhaps cold winter days?

Frosty The Lucky.

Link to comment
Share on other sites

The customers were mostly local farmers that needed repairs made to their farm equipment and that was how the blacksmith shop was established in the late 1800"s. Later when cars trucks and tractors materialized a second shop was built to repair those as well and that was where I worked mostly except when they needed help in the blacksmith shop.

The farmers were always there to complain about the weather and gossip and make deals on new or used equipment. We worked 6 days a week with Sundays off. Also we did repairs in the field for tractors and trucks as well as complete overhauls in the shop. I was able to overhaul a Diesel Mercedes truck engine by myself when I was 16 starting Friday afternoon when the truck was dropped off and having it roll out the shop Monday morning.

Completed my apprenticeship when 18 but had a severe motorcycle accident. After getting out of hospital I was not in good shape so I decided since I could not work anyway to try to get an engineering degree instead.

That turned out to require a lot  of work initially since I had left school at 15 but 4 years later I graduated.

Over the years here in Maryland I have collected some blacksmith equipment but never had the time to do anything with it. Between raising 9 adopted kids and a heavy travel schedule for my job it was hard to find time. But now I am retired I should be able to set it up. On the farm where we live there is a building 20 ft by 30 ft that I think will work for it.

Link to comment
Share on other sites

yes Texas is a huge place. We lived in Houston at the time but I was doing some large scale construction projects in the  West Texas area ( Permian Basin ). Also was working on a Power project in the Four Corners area of New Mexico so I am familiar with the wast distances

Link to comment
Share on other sites

Well compared to Alaska; Texas is only moderately large; but it has environments from swamp to desert; seashore to hills. NM is smaller; few swamps and much taller mountains.  I can see the Magdalena Ridge Observatory at 10000' from my front door down in the Rio Grande valley.

While Houston has the Space center we have the first atom bomb test site---and a spaceport.

Did you ever get a chance to see the mal pais ?  Lava flows that would test the mog!

Link to comment
Share on other sites

JHCC thank you for the tips for the forum.

 

The Unimog is a unique off road truck with a very flexible suspension that allows all four wheels to touch the ground under most circumstances and coupled with the ability to lock up all four wheels for traction it can travel where others can't

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...