Beatsy' s Forge Posted December 16, 2016 Share Posted December 16, 2016 Hey all, I am getting ready for the purchase of my lifetime anvil and was wondering if anyone uses or has used this brand anvil. The one im looking at is the #57 210lbs. Or the #56 120 any recommendations? It will be a brand new purchase any help in this would be appreciated. Thanks, Martin Quote Link to comment Share on other sites More sharing options...
Dom Posted December 16, 2016 Share Posted December 16, 2016 From what I've read and heard about Refflinghaus, you're about to buy the "crème de la crème" of brand new anvils. Seems like the difference between the 56 and the 57 is the upsetting block. My only question is why such a big weight difference? Do you want a 210# or a 120# anvil? That quite evidently impacts the price also. Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 Well the price difference is only a few mor hundred that all the size is only part of it though. Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Fatfudd Posted December 16, 2016 Share Posted December 16, 2016 I have the 58 - 330lbs and believe it is the finest anvil made anywhere in the world. Either of the 2 you are looking at are great but you you would be better served in the long run by getting the largest you can afford. Quote Link to comment Share on other sites More sharing options...
Judson Yaggy Posted December 16, 2016 Share Posted December 16, 2016 For the same price you could buy a Nimba or Fontanini 250 pound anvil. Comparable quality and both made in the USA. Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 Fat fudd this is why I am considering the 220 ,as we speak im trying to look at previous post but there seem to be something wrong with the stickys, so thanks for the advice. Judson Yaggy It is my understanding that the Rellfingheis has a harder face perhaps the hardest and possibly the best rebound in new anvils, haven't done any research on the nimba or fontanini though. Do you use one of these? What do you think about them ? I guess I should have put in the post that I was looking for a great anvil but I m partial to the Rellfingheis though. Thanks for the reply Quote Link to comment Share on other sites More sharing options...
Lou L Posted December 16, 2016 Share Posted December 16, 2016 I'm a newb but I don't think hardness is the ultimate measure of an anvil. I do know that you have to baby harder anvils more because they are much more likely to chip on the edges. They definitely provide more force to a work piece fro the bottom when you are working but I feel that there are diminishing returns with this. I would rather get a 250# anvil that requires one more swing of the hammer (theoretically) over a 210# anvil that is slightly harder if the price is the same. If the 250# anvil didn't come with an upsetting block my decision would probably be swayed to the smaller one. I guess in the end it comes down to design. If the features appeal to me because of the type of work I do I would buy it. Either way, I think you should take Judson on his word and check out the Nimba or Fontaninni just to be thorough...I've heard great things about all of those names. Buy the one that you fall in love with aesthetically. You want to wake up in the middle of the night and feel the need to go caress it. . I'm jealous you are buying your forever anvil...congrats! Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 1 hour ago, Lou L said: I'm a newb but I don't think hardness is the ultimate measure of an anvil. I do know that you have to baby harder anvils more because they are much more likely to chip on the edges. They definitely provide more force to a work piece fro the bottom when you are working but I feel that there are diminishing returns with this. I would rather get a 250# anvil that requires one more swing of the hammer (theoretically) over a 210# anvil that is slightly harder if the price is the same. If the 250# anvil didn't come with an upsetting block my decision would probably be swayed to the smaller one. I guess in the end it comes down to design. If the features appeal to me because of the type of work I do I would buy it. Either way, I think you should take Judson on his word and check out the Nimba or Fontaninni just to be thorough...I've heard great things about all of those names. Buy the one that you fall in love with aesthetically. You want to wake up in the middle of the night and feel the need to go caress it. . I'm jealous you are buying your forever anvil...congrats! As a matterof fact as far as ive researched the Rellfingheis anvils have a very high rockwell into 60s so this is exciting not to mention the steel they make them from is hard enough to take a ball pean hammer blow and not even mark it.I also understand by the type or alloys used not only keeps the sitface strong to an astonishing depth and by the same alloys allows for strong unchipable corners.It was said that during a forge in the fella that sells these things missed as a striker came down pn a corner half on half off and not even a scratch.I guess all in all I want the best of the best and sofar I have my eye on the Rellfingheis 220lb Thanks for the reply, Martin Quote Link to comment Share on other sites More sharing options...
Marc1 Posted December 16, 2016 Share Posted December 16, 2016 Last time I asked the question to one of the Refflinghaus family, he told me 57 Rockwell at 25mm depth. You can email them, they are quick to answer. I agree that the southern German pattern is probably the best shape, together with the French 'pig' Quote Link to comment Share on other sites More sharing options...
Judson Yaggy Posted December 16, 2016 Share Posted December 16, 2016 8 hours ago, Beatsy' s Forge said: Do you use one of these? What do you think about them ? Here you go Quote Link to comment Share on other sites More sharing options...
Fatfudd Posted December 16, 2016 Share Posted December 16, 2016 All of the anvils mentioned are great and one should also consider the rhino anvils. That being said I have looked at and tried them all. The rathole and nimbas are somewhat softer and the conventional wisdom is that they won't chip as easily but they do get marked with a hard missed blow. As mentioned above the Refflinghaus are harder and I have yet to mark or chip mine and I use it everyday. Actually the faces are guaranteed to be at least 59hrc. See- http://www.blksmth.com/Refflinghaus_Anvils.htm On the nimba website it says- Heat treatment results in Rockwell 50-52 hardness on all surfaces of the anvil. One of our members has 2 nimbas and his only regret with them has been the softness. Rathole anvils are a little harder per their website- The anvils are made from high quality H-13 steel, Rockwell C Hardness between 52 and 55. Quote Link to comment Share on other sites More sharing options...
kubiack Posted December 16, 2016 Share Posted December 16, 2016 All I can say is buy a bigger one. You sure don't want to be spend that much on one and then in 4 or 5 years wish you had spent another $500 to get the next size up. If this is truly your lifetime anvil save a few more months and get a bigger one. If it were me I would get the 275 lb or larger #58. Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 JUDSON Well I guess we have a winner and it is the Rellfingheis and cant wait to get mine.I got in touch with the supplier and he said the 220 is not in stock and it could take up to a year to bring one of these bad boys home...lol cant wait so I will plan on the 220 untill I get word of him having his resupply I will save some more money and Mabe just Mabe I will get a bigger one.I like the hardness of the Rellfingheis at a great depth of hardness seem to be the best imo sold today. And ive done some research on lots of anvils as of now. Thanks for the reply and attachment. I took a gander and this is my conclusion so thank you... Quote Link to comment Share on other sites More sharing options...
Tubalcain2 Posted December 16, 2016 Share Posted December 16, 2016 SO jealous. Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 Well, Ive definitely made the my decision for my lifetime anvil .For those who replyed and have given there opinion .I appreciate it .The decision I made is to purchase the Rellfingheis #58 330lbs I think this will work for all my projects and probably not out grow me a bit. Now just to save a few more hundred pluss shipping the cost without shippingis a pricey 2850 in cold hard cheddar but at least I will have my dream anvil and maybe set up a bed next to me and my wonderful wife who is allowing this to happen.I know it is a bit bigger than I was originally thinking but I was told if you think you want an anvil a sertain weight to go to the next size .This makes sense as tool time Tim says hu hu hu or something. I am so blessed to have a wife that supports my dream and dosent hold me back much.For that I thank you.For all the people that have given me there words of wisdom and just a nice conversation. Isay thank you and God Bless you and all you familys. Forge on and create beautiful things sharp or artistic. Thanks all, Martin Moldovan Quote Link to comment Share on other sites More sharing options...
Judson Yaggy Posted December 16, 2016 Share Posted December 16, 2016 You are going to love it, nice anvil and good call on the bigger size. Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 16, 2016 Share Posted December 16, 2016 Start now and put just $5 a day into a kitty. The anvil should be paid for in just 19 months. Once you get to using the new anvil you will enjoy your decision even more. With each hammer blow, remember that you have a wonderful wife, and be sure to also spend some quality time with her. (grin) Quote Link to comment Share on other sites More sharing options...
Beatsy' s Forge Posted December 16, 2016 Author Share Posted December 16, 2016 -Glen The five bucks a day is a goood starts Thanks for the incouragment I was thinking 100 a week until I get there.Since I've got you here is there any way to change my Name to my New Forge name without making a new profile? And I agree my wife is a heven sent and Im fortunate to have such a woman. As far as the anvil goes I can'twait to get the cheddar together. Judson Thanks for the incouragment, like stated earlier Ive read that if you want a certain size you should save a little mor a get the next one up. Quote Link to comment Share on other sites More sharing options...
Fatfudd Posted December 17, 2016 Share Posted December 17, 2016 The 330lb is a perfect size for a shop anvil and with the side table you have a wide face to work on. I sort of wanted the 460 but I'm glad that I went with the 330 instead. You won't ever be sorry. Quote Link to comment Share on other sites More sharing options...
ede Posted December 17, 2016 Share Posted December 17, 2016 11 hours ago, Beatsy' s Forge said: I know it is a bit bigger than I was originally thinking but I was told if you think you want an anvil a sertain weight to go to the next size Not to dissuade you, just remember that unless you are a herculean human, moving a 330lb anvil will be difficult to do, whereas I can lift and move my 220 as needed. It has also been said that sometime size is just ego. Quote Link to comment Share on other sites More sharing options...
Marc1 Posted December 17, 2016 Share Posted December 17, 2016 150 kg ? Pss ... 2 people can move 150k around as they please. And some can move 150 on their own. All you need is a forklift ha ha That is the anvil Good for you ... now are you sure you don't want the 500 K one? Quote Link to comment Share on other sites More sharing options...
matei campan Posted December 17, 2016 Share Posted December 17, 2016 I can easily "walk" my 180kg anvil, sitting on a solid oak sump, around the shop, that's not an issue. I also effortlessly raised my 150kg anvil on its base, alone, using a thick 3m long plank as an incline - 30 seconds job. so, unless it's 500kg, that's a non-issue. hey, Martin Moldovan, are you of Romanian origin? Quote Link to comment Share on other sites More sharing options...
Fatfudd Posted December 17, 2016 Share Posted December 17, 2016 mine is on a tripod stand and I move it by just walking it around but normally you really don't need to move a shop anvil that much. The 400lb fisher gets moved a little more frequently. Quote Link to comment Share on other sites More sharing options...
ede Posted December 17, 2016 Share Posted December 17, 2016 Sure, walking a shop anvil around is no biggie. To me, the max size for comfortably moving an anvil by myself outside my shop--read: portable anvil-- is around 220. YMMV Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 17, 2016 Share Posted December 17, 2016 And then you get the "Oh the smithing demo is on the backside of the building and no you cant drive over the garden and there's 2 sets of steps anyway" My demo anvil is my lightest one! (Though I'll sometimes have a heavier one as a backup if they say, "Sure drive right up to your spot and we'll help unload!") I've also had campouts where I had to pack stuff in; the viking anvil makes those trips Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.