Jump to content
I Forge Iron

JHCC

2023 Donor
 View Profile  See their activity

  • Posts

    19,406

  • Joined

  • Last visited

 Content Type 

Everything posted by JHCC

  1. JHCC
    No hood at present. I’m forging in a two-car garage with the door open and a big standing fan to eject the little smoke the anthracite puts out. I’m playing with an idea for a downdraft hood that could take the smoke out more directly, but that’s a little way off.
  2. JHCC
    That’s a possibility; I’ll give it a try. Addendum: I tried it, and I prefer the setup as shown. It’s more compact and more secure, and the blower is so overpowered that any airflow losses from the hose aren’t an issue.
  3. JHCC
    Trying out blower mounting positions on the new forge. This one looks good; now to make a bracket. Also left some water in the bosh to test the seams. The only drips were from the drain valve.
  4. JHCC
    I don't think there's a time limit; I just successfully edited a comment from four days ago.
  5. JHCC
    If you hover your cursor over one of your FB comments, a little ellipsis should appear halfway up the right-hand side. If you hover over that, you should get a message that says "Edit or delete this". Click on that, and chose your option. Oh, and the soft return just goes to the next line. Two soft returns gives you a nice paragraph break.
  6. JHCC
    On FB, do a soft return: hold down the Shift key while pressing the Return key.
  7. JHCC
    The Return key is your friend.
  8. JHCC
    I think Lou means "in a fire and lost its temper", but I could be wrong.
  9. JHCC
    If you both lived near me, you could have lunch at a local place called "The Foundry".
  10. JHCC
    The Holland anvil is made by IFI member foundryguy; there are some posts about it in the "Show me your anvil" thread, such as this one: https://www.iforgeiron.com/topic/1085-show-me-your-anvil/?do=findComment&comment=590950
  11. JHCC
    Another nice thing about carbon steel pans which is not true for some stainless pans is that they work on any kind of cooktop. Some stainless (and all copper, aluminum, and glass) pans don't work on induction cooktops, as they are non-magnetic.
  12. JHCC
    Carbon steel pans are the mainstay of classic restaurant kitchens. I have a steel saute pan from Matfer that I got from a restaurant supply place many years ago that I use all the time. Care and feeding is basically the same, although a steel pan is lighter and less brittle than a cast iron pan of the same size. Take a look at this article from Serious Eats for more info.
  13. JHCC
    Everyone wants to be the next Yvon Chinouard (forgetting that his father was a blacksmith).
  14. JHCC
    Them's fightin' words, buckaroo!
  15. JHCC

    I'm a dad!

    JHCC replied to Daswulf's topic in Everything Else

    You can take the smith out of the shop.... (That pedestal table could make a good stand for something.)
  16. JHCC
    Cast steel is superior to ductile iron as an anvil material (better rebound, better durability), if somewhat louder.
  17. JHCC
    No-one's suggesting that (indeed, the Kanca anvil is made in Turkey; the Peddinghaus, Germany), just that your risk of disappointment with a reseller of an unknown product of questionable quality is pretty high.
  18. JHCC
    If you like that, take a look at Andy Mackenzie (IFI's own EverythingMac)'s video of his Blacker treadle hammer, which has a somewhat similar action: Note that this answers your earlier question about having some kind of mounting arrangement for the sledgehammer.
  19. JHCC
    Welcome to IFI! If you haven’t yet, please READ THIS FIRST!!! If you are just starting out (and even if you’re not), you would be much better advised to follow John McPherson’s advice above and get an an anvil of known quality from a reputable dealer or to consider improvising a nonstandard anvil as in this thread:
  20. JHCC
    The only snakes in my part of Ohio are non-venomous, which is fine with me.
  21. JHCC
    Remember that garage door springs come in two varieties: tension and torsion. You want tension.
  22. JHCC
    Lovely. One good option for springs is the counterbalance spring off a garage door. A repairman near me gave me half a dozen old ones that he’d replaced:
  23. JHCC
    Looking back over your original photos, I realize that I have failed to draw your attention to one very important detail: you appear to have cut off your thumb.
  24. JHCC

    My first knife

    JHCC replied to Gub410's topic in Knife Making

    We’v seen lots of KSOs — Knife-Shaped Objects — but I think this is our first OSK: an Object-Shaped Knife!
  25. JHCC
    Nice ash dump.
×
×
  • Create New...