jimmy seale

wealcome,justin to our home in cyber space! lots of good folks and ideas here, lots of us is wannabes!! some pros here too, so pull up a chair sit down and enjoy.look forward to talkin to ya, jimmt seale

will be prayin here-folks here good at thar- be blessed, jimmy and mary seale

well,if it works well great deal. but now days,you can get most rods in a/c so d/c isn't nessisary, except in maybe some specialty applications.but then again i just a dobber,jimmy

folks, daddy went home today- talked a few and he doing good!!

thanks for the pixs. wouldn't the neibhorhood love me running that thing!!!

well folks- a short report; daddy should be going home tomarrow-one of the drains he had was still flowing too much,he was disapointed but, he is doing well,again thank you all, jimmy seale

will be slow but yeah that will work.but ya need some man size plate to get any whith out the ram- my .02 worth but yes it'll work, have fun jimmy

thank you all for the prayers, he had 4 bypasses but is doing well, may go home friday or saturday. he has had little problems but dr. has a good report on him. please keep him in your prayers, as this will be a big change in his/our lives. remember folks see your family as often as possable, never know.... God Bless ya'll, jimmy & mary, and the rest of the family

folks, i just found out my daddy had a major heart attack, so please lift him up in prayer as only the Father knows best, will know more later, thank you,jimmy and mary seale

by all means... mix up soap and water and check all connections and the reg. too- it could be leaking, stay safe, jimmy

Irn. the Good Lord will provide!! knee mail going up here too as well. Ya'll in our prayers, so let HIM minister to ya'll in your time of need, God Bless, jimmy & mary seale

howdy tom, welcome to ifi. lots of great folks here, so cruise around and enjoy the site. jimmy

well, i haven,t made wood chisles but did make a draw knife out of 52100. i narmelized 3 times then hardened , and tempered too 400 3 times . hope this helps and good luck,jimmy

great as usual rh,when i grow up i wanna be like you,well done!! jimmy

maybe they need to get a chip on they camara lens- that'll show em, be safe out there you is the only one that can do it, jimmy

some trucking co. usw a fishnet type curtain to secure cargo, maybe you can find some discards and cut to suit you or maybe a thinnish piece of flat with corner hooks and a chain 4 leg sling? let us know, jimmy

all that has been said is true, remember lt will be loaded/off loades with a crane,most likley, so you will have roughnecks, roustabouts in the immediate area. so liability will be a big issue. and it gets real rough out there,so be prepared to analize all aspects of the job- if something happens they will hang somebody!! maybe build it and add,approved links,chains,cables,etc. to have it conform. but remember that a roughneck can tear up an anvil with a feather, be weary and look at all the fine print, hope this helps,jimmy seale

nice pointy cutter,will try damascus when i get the nerve, thanks for stoking the fire,be safe,jimmy

i've cut tanks to 250 gals. liquid measure.same fill with H2O and cut low to drain. still here, but be aware of old butane tanks-that is more unstable than propane. and never mess with acuetalene- if in doubt, don't.also you can vent with vehicle exhaust- i do not recommend this, but , it's bettern nothing! but be careful and safe doing what your going to do. by the way for reference a propane tank needs 30% capasity for vapor, so actual capasity is 30% more=if your calculating for liners and such you'll need more than expected, be safe! jimmy

knee mail going up here-the Good LORD will be with ya'll and is there for you to lean on, God Bless, jimmy& mary seale

i worked i rifle foe bout 5 yrs, where you from there?

Great. but mind you it is adictin,,,good job ypungun- many more years too ya- let us know bout the rest. jimmy

i don't think you will have enough nat gas pressure out of a city line to do any good- but i could be wrong.