Flynn Posted December 17, 2020 Share Posted December 17, 2020 So there I was. In a barn in rural New Hampshire browsing around while I was buying up a cart for the workshop I saw online. He told me he was moving so everything was for sale. I immediately whipped out my TPAAAT and asked if he had any anvils hiding in the barn. Lo and behold, he shows me this. He said he already had an offer of $250, but didn't know when or if the guy would come get it. I went straight to the bank and came right back with $250. Just got home. I think it's a Peter Wright based on the shape and the "Solid Wrought" stamp. Can anyone confirm and give me an idea of the year to satisfy my curiosity? The only other marking on it is a 7 stamped on the other side, which I assume is an inspector's mark. Any information about it would be appreciated. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted December 17, 2020 Share Posted December 17, 2020 I think it's a Peter Wright also, due to the flats on the feet and the 149 should be the weight. A pretty slick anvil that should serve for several more generations and for $250 it's a steal. All it needs is hot steel hammered on the face to make it shine. Quote Link to comment Share on other sites More sharing options...
TWISTEDWILLOW Posted December 17, 2020 Share Posted December 17, 2020 I agree with y’all, my two Peter wrights are smaller then that one but they both have the same feet as yours and With the same circle saying solid wrought. Quote Link to comment Share on other sites More sharing options...
Chelonian Posted December 17, 2020 Share Posted December 17, 2020 Is there any sign of a Trenton diamond on it? The proportions seem more like a Trenton than a Peter Wright to me, and many of the Trenton anvils also had the flats on the feet and the "solid wrought" stamping. Additionally, as far as I know Peter Wright always used the hundredweight markings rather than pounds. Quote Link to comment Share on other sites More sharing options...
Flynn Posted December 17, 2020 Author Share Posted December 17, 2020 No, no sign of anything above the Solid Wrought marking. Maybe it was ground off? The Trenton's I've seen have had the weight listed on the front feet rather than the side, but I'm far from an expert. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 17, 2020 Share Posted December 17, 2020 What does the bottom of the base look like? I'd say Trenton too: narrow waist and flats and WEIGHT IN POUNDS NOT CWT! Top of the line either way and a great price these days. I got my 468# Trenton much the same way: he told me he had offer of $350 a couple years back and turned it down. i asked him if he would take it in cash today and the deal was done! Quote Link to comment Share on other sites More sharing options...
Flynn Posted December 17, 2020 Author Share Posted December 17, 2020 I think I just need to give in and get myself a copy of Anvils in America. I'll get some better shots of the feet and a shot of the base tomorrow, if I can make it out to the garage after the snow buries us. Anybody else up here in New Hampshire? Quote Link to comment Share on other sites More sharing options...
rustyanchor Posted December 18, 2020 Share Posted December 18, 2020 German made Trenton?? Too lazy to dig in AIA...BUT at $250, if it rings and rebounds, it is a very nice deal and looks to be in beautiful shape. Quote Link to comment Share on other sites More sharing options...
Flynn Posted December 18, 2020 Author Share Posted December 18, 2020 Yep, the rebound is fantastic. If you wouldn't mind looking up what you can in AIA, I would appreciate it. Trying to figure out a little more info on it since it doesn't have any serial numbers and the Trenton logo is missing. Quote Link to comment Share on other sites More sharing options...
rustyanchor Posted December 18, 2020 Share Posted December 18, 2020 Looking at AIA, Mr P writes that some of the earliest Trentons were made in Germany and some were look like they were made by Peter or Henry Wright. A Peter or Henry if: The weight is below where the the trademark should be; a circular "solid wrought"; flat bottomed forged base, no S/N, with stepped feet. Mr P does not say if the Wright made anvils had the weight in pounds or CWT. I saw what I believe was a German Trenton and the weight was in pounds, That one was marked as a Trenton with the weight under the trademark. I think I am reading AIA right, if so it looks like a Wright well made anvil. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 18, 2020 Share Posted December 18, 2020 "An anvil made Wright". Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted December 18, 2020 Share Posted December 18, 2020 Wright on Quote Link to comment Share on other sites More sharing options...
Flynn Posted December 18, 2020 Author Share Posted December 18, 2020 Thank you so much for the info! Very much appreciated. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 18, 2020 Share Posted December 18, 2020 My scout troop was once camped at the end of a runway at Wright Patterson AFB when the SAC B-52 bomber wing came in around 5 am... Quote Link to comment Share on other sites More sharing options...
JHCC Posted December 18, 2020 Share Posted December 18, 2020 The college where I work has a physics laboratory named for the Wright brothers, although neither of them went here. However, their sister did, and she apparently convinced at least one of them to help underwright the construction of the lab. Quote Link to comment Share on other sites More sharing options...
Flynn Posted December 20, 2020 Author Share Posted December 20, 2020 (edited) Oh, ThomasPowers I finally got around to getting you pics of the bottom of the anvil. Had to dig the garage out of the snow! Does this tell you anything new? Edited December 20, 2020 by Mod30 Remove @name tag Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.