idahomutt Posted September 21, 2015 Share Posted September 21, 2015 (edited) I am new to blacksmithing here in southeast Idaho. I have forge on order and I think I have a good line on a Anvil. I just saw this vice pop up on my local craigslist and I would like to know if any of you could identify it and whether or not I should pass and wait a different one to come along. I mention it has a crack on the leg that shows in the picture is it worth repairing if the price is right? I Thank you,Matt Edited September 21, 2015 by idahomutt Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted September 21, 2015 Share Posted September 21, 2015 The answer depends on size of vise, availability of vises in your area, the asking price, the condition of the screwbox and threads, and your ability to repair the vise. Quote Link to comment Share on other sites More sharing options...
idahomutt Posted September 21, 2015 Author Share Posted September 21, 2015 I can repair it, they are asking $100 There is a neat looking old vice that I can get from the guy that has the anvil but it will run me $175. I will check the screwbox and see what it looks like. thank you Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted September 21, 2015 Share Posted September 21, 2015 Lets see the handle was a replacement, the mounting plate is missing, the spring is missing and the leg is broken. Seems to be kind of high priced for it's condition to me.If you are desperate for a postvise and the screw and screw box are in very good condition and you can make the repairs/replacements then...Have you welded much wrought iron and so are aware of it's peculiarities? Quote Link to comment Share on other sites More sharing options...
Kozzy Posted September 22, 2015 Share Posted September 22, 2015 On the other side of Idaho....that $ 100 bucks is a bit high for a vice in that poor condition. If you can wait and are willing to keep your eyes open, you'll trip over another quite soon. They are not too uncommon throughout most of Idaho. Quote Link to comment Share on other sites More sharing options...
idahomutt Posted September 22, 2015 Author Share Posted September 22, 2015 Thank you for pointing out it was missing pieces I will buy my time and see this other vice tomorrow. Thank you for your help. I will see if I can post a picture the next one to see if you guys have any suggestions Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted September 22, 2015 Share Posted September 22, 2015 That vise looks to possibly be an Iron City , which is a good brand. Watch it, and see if it sells or not. If it doesn't make a low offer on it. I recently bought a 4.5" Colombian for $40 and it is complete, and in good shape. I probably could have got it for less than I did, as I found out later tha it was headed to the thrift store if I had not bought it. They were originally asking $100. Vises are more common as they were used in many other areas besides blacksmith shops. Quote Link to comment Share on other sites More sharing options...
notownkid Posted September 22, 2015 Share Posted September 22, 2015 As Big Gun says they were and are used in more than just blacksmith shops. The last two I've bought, good shape, all the parts 5" for $40 & $45 were from Carpenter Shops. Seen them in plumbing shops and auto service shops. Take your time, $175 seems high to me as well. Quote Link to comment Share on other sites More sharing options...
DSW Posted September 22, 2015 Share Posted September 22, 2015 2 years ago I saw a pristine one come out of an old machine shop on the 2nd floor where they did basic repairs for their equipment. I'd have stayed and bid on it, other than everything on the 2nd floor was going as large lots. You buy everything in the room including mystery chemicals, paints, parts etc and it's your job to move and dispose of the items properly. Too much HAZMAT in that room for just a vise. Quote Link to comment Share on other sites More sharing options...
neg Posted September 22, 2015 Share Posted September 22, 2015 (edited) I've never payed more than $60 for a post vise and I have 6 of them. I've got all of them except for one at flea markets. Edited September 22, 2015 by neg Quote Link to comment Share on other sites More sharing options...
idahomutt Posted September 23, 2015 Author Share Posted September 23, 2015 Thank you all for the replies, I will pass on this one and keep an eye out for the next opportunity. Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted September 24, 2015 Share Posted September 24, 2015 Keep an eye on it to see if it sells. It if stays listed for awhile, call and make a reasonable offer on it. Quote Link to comment Share on other sites More sharing options...
casper1311 Posted October 28, 2015 Share Posted October 28, 2015 (edited) Hi I'm also new to this art form. Where are you guy's getting these vices for these prices? I'm in Kennewick Wa and most people I'm talking to have never seen or heard of a leg vice. I have a Swedish 165# Anvl and just picked up cast iron forge. Now looking for a vice or how to make one. Any helps would be appreciated. Edited October 28, 2015 by casper1311 Quote Link to comment Share on other sites More sharing options...
Kozzy Posted October 28, 2015 Share Posted October 28, 2015 Hi I'm also new to this art form. Where are you guy's getting these vices for these prices? I'm in Kennewick Wa and most people I'm talking to have never seen or heard of a leg vice. I have a Swedish 165# Anvl and just picked up cast iron forge. Now looking for a vice or how to make one. Any helps would be appreciated. Leg vices are not uncommon in your area...just not as common as they tend to be back east. You have to keep your eyes open, visit a lot of "antique" (junk) stores and watch auction listings. For instance last winter there was an auction up near Quincy that had about 8 of them in one shot. You may have to get off the beaten path a little to the smaller surrounding towns and areas.Many farmers have them so watch for farm auctions also. They shouldn't go for big money unless they are the large size and in good condition. Just pass if you find a junker that someone thinks is worth the price of gold.And note that it's not a necessity--just nice to have if you ever run across the right deal. You can make do with even a junker Chinese harbor freight vice until the right leg vice comes along: Probably 9 out of 10 beginning smiths do. Quote Link to comment Share on other sites More sharing options...
DSW Posted October 28, 2015 Share Posted October 28, 2015 Join a local blacksmithing group. They often know where to find these things and often guys will have them to sell at meetings that they picked up in their travels. Quote Link to comment Share on other sites More sharing options...
casper1311 Posted October 28, 2015 Share Posted October 28, 2015 Leg vices are not uncommon in your area...just not as common as they tend to be back east. You have to keep your eyes open, visit a lot of "antique" (junk) stores and watch auction listings. For instance last winter there was an auction up near Quincy that had about 8 of them in one shot. You may have to get off the beaten path a little to the smaller surrounding towns and areas.Many farmers have them so watch for farm auctions also. They shouldn't go for big money unless they are the large size and in good condition. Just pass if you find a junker that someone thinks is worth the price of gold.And note that it's not a necessity--just nice to have if you ever run across the right deal. You can make do with even a junker Chinese harbor freight vice until the right leg vice comes along: Probably 9 out of 10 beginning smiths do. Thanks. Have been to the "antique shops " that's how I found my anvil and open forge. Will keep on keepin on. Any views on gas vs coal. Will probably wind up with both. Quote Link to comment Share on other sites More sharing options...
casper1311 Posted November 13, 2015 Share Posted November 13, 2015 On Wed Oct 28 2015 10:21:58 GMT-0700, casper1311 said: Hi I'm also new to this art form. Where are you guy's getting these vices for these prices? I'm in Kennewick Wa and most people I'm talking to have never seen or heard of a leg vice. I have a Swedish 165# Anvl and just picked up cast iron forge. Now looking for a vice or how to make one. Any helps would be appreciated. Found a vice in Cour d,Alene. Paid 90 bucks but was complete and repairs needed just a little elbow grease. Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted November 13, 2015 Share Posted November 13, 2015 Mine came from automotive swapmeets, a house being demolished, and a local Facebook yardsale page. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted November 13, 2015 Share Posted November 13, 2015 mine come from *everywhere* but ebay; though I usually pick up a postvise or two every time I go to Quad-State as it's a regular source. (found one leaning against an old barn when I was out test driving a car---wife wouldn't allow me to go back and get it until we had made the deal on the car...) Asking folks at the fleamarket selling old barn stuff if there was one they left at home due to it being a pain to transport has been a good way to find them... Quote Link to comment Share on other sites More sharing options...
WL smith Posted November 15, 2015 Share Posted November 15, 2015 Always check out flea markets and nickel page type advertisements. I found my vices at flea markets. LOOK MORE IN THE COUNTRY THAN THE CITY. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.