rthibeau Posted November 23, 2014 Share Posted November 23, 2014 ...and let your imagination run wild........'> Quote Link to comment Share on other sites More sharing options...
ausfire Posted November 23, 2014 Share Posted November 23, 2014 Well, could have any number of uses, but I would suggest it is a ring for a bull's nose. The smaller ring would have a rope with a knot on the end passed through it. Makes it easier than tying knots on a single nose ring. Quote Link to comment Share on other sites More sharing options...
John McPherson Posted November 23, 2014 Share Posted November 23, 2014 I have seen similar figure 8 rings used as movable horse pickets on long ropes strung between two trees. You simply pass a loop of rope thru the large opening and behind the small opening's neck, then clip a lead to the small ring. Quote Link to comment Share on other sites More sharing options...
LastRonin Posted November 23, 2014 Share Posted November 23, 2014 Size? Quote Link to comment Share on other sites More sharing options...
Dodge Posted November 23, 2014 Share Posted November 23, 2014 Clearly, a go-no-go-super-double-duty wham-jammer of the non-flexible type Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted November 23, 2014 Share Posted November 23, 2014 It is light duty, as the large ring isn't welded and the small ring is slotted and drifted from the parent stock with out upsetting, or drawing down. It looks freshly forged, as in no rust and stock steel size. I'd guess 3/4"x1/4" bent the hard way . I would be inclined to think picket ring like John suggests as it looks like 1/4" or 5/16" shooing stock. I will admit to initially thinking it was 1x1 1/2" but the lopsided small ring suggests smaller stock Quote Link to comment Share on other sites More sharing options...
swedefiddle Posted November 23, 2014 Share Posted November 23, 2014 It could be an adjustable flower pot holder. One center post, multiple fancy flower pots. It could be for making soap bubbles!! Quote Link to comment Share on other sites More sharing options...
Farmall Posted November 23, 2014 Share Posted November 23, 2014 It does look an awful like it's used for rope - either a hitch as above or reminiscent of a figure 8 descender for rappelling. Quote Link to comment Share on other sites More sharing options...
Dave Budd Posted November 23, 2014 Share Posted November 23, 2014 it looks very much like something that is referred to in various archaeological journals as 'trace rings' :) I've never been quite sure what they are, but I think it might be to do with horse or harness fittings? Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted November 23, 2014 Share Posted November 23, 2014 Traces, or tugs are the strap that goes either from the breast strap of the hames to swingle (single) tree Some times mules and donkeys use chains, wooden hames use a hook and eye arrangement wich, as the angel of draft is adjustable is a better setup. . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.