Words Posted June 23, 2012 Share Posted June 23, 2012 I've recently checked out a couple of books on blacksmithing, The Art of Blacksmithing by Alex Bealer and The Practical Blacksmith (well some of this one, it seemed similar to Bealer's book). Now I'm looking books that is more geared more towards teaching skills and some basic projects that I could tackle, especially toolmaking as I have no blacksmithing tools. I'd love to buy all these books used but with limited supply of money, I'll have to limit myself to around 2 books as they seem to cost around $20 each. Some books that I saw that were very popular were The New Edge of the Anvil (better than The Edge of the Anvil?) by Jack Andrews, Backyard Blacksmith by Lorelei Sims, The Complete Modern Blacksmith by Alexander Weygers, and A Blacksmithing Primer by Randy McDaniel. Of these and other books you love, which 1 or 2 would be a solid book to be my personal teacher, with less on history but more on the work. Thank you for any advice! Quote Link to comment Share on other sites More sharing options...
EGreen Posted June 23, 2012 Share Posted June 23, 2012 not sure about learning books but our small library can get on line an borrow from different libraries.just need the name an author Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted June 23, 2012 Share Posted June 23, 2012 If you check Amazon.com for the books, they are usually very inexpensive for good used books. I have gotten several from there and have been very pleased with the condition of them. Another really good book for learning is Mark Aspery's volume 1 called Mastering the Fundamentals of Blacksmithing, although it isn't as inexpensive as some of the others. But I believe it is well worth it. Also, Lorelei's book, DIY Backyard Blacksmithing is a good basic one, at less cost. :) Quote Link to comment Share on other sites More sharing options...
Words Posted June 23, 2012 Author Share Posted June 23, 2012 Thanks for the Mark Aspery tip, it looks more like what I think will be most helpful for me! Seems like something worth investing in. Quote Link to comment Share on other sites More sharing options...
son_of_bluegrass Posted June 23, 2012 Share Posted June 23, 2012 If I was looking for 1 book to learn from I'd get "Plain and Ornamental Forging" by Schwarzkopf. It was written for as a school text book. The next on my list would be "A Blacksmithing Primer" by Randy McDaniel. I haven't laid hands on any of Aspery's books yet so I can't comment on them but I hear they are suppose to be good. ron Quote Link to comment Share on other sites More sharing options...
Thomas Dean Posted June 23, 2012 Share Posted June 23, 2012 There is a section on most all the books available with reviews and comments from a lot of members. http://www.iforgeiron.com/forum/40-book-reviews/ A few of the books are marked "HOT" (for whatever reason). I have Mark Aspery's book as well as Lorelei's and like them both. Mark goes into a LOT of detail, formulas for take-offs, and etc. Lorelei's book is easier for those with no experience and easier to understand for the beginner/novice and there is a section on different projects starting out simple and gradually getting a little more difficult. Both would be good in your library. Quote Link to comment Share on other sites More sharing options...
Dave Hammer Posted June 23, 2012 Share Posted June 23, 2012 Blacksmith's Primer... Quote Link to comment Share on other sites More sharing options...
robert hanford Posted June 23, 2012 Share Posted June 23, 2012 If you are a beginner, Randy McDaniel's book or Lorelei Sim's book are excellent. Randy's book has information on forging a dragon head which was very exciting for me, and got me to keep going beyond the wall hook phase. Get them both on Amazon.com. Quote Link to comment Share on other sites More sharing options...
Pat Roy Posted June 24, 2012 Share Posted June 24, 2012 I'd have to say Lorelei Sims' The Backyard Blacksmith is a very good start for a beginner. Randy McDaniel's A Blacksmithing primer was used in the introductory course I took at New England School of Metalwork and it was a good resource. I am sure that Mark Aspery's books are also very good although I haven't read them yet. It's good also to buy more advanced books and challenge yourself. Quote Link to comment Share on other sites More sharing options...
wolfshieldrx Posted June 24, 2012 Share Posted June 24, 2012 Dont know if you have an "Ollie's" discount store near you but the one here had about 10 copies of ms simms book for less than $10 each. I bought em all and resold them to my smithin buddies at my cost. Worth checkin out...bart Quote Link to comment Share on other sites More sharing options...
eddie Posted June 24, 2012 Share Posted June 24, 2012 Aspery Quote Link to comment Share on other sites More sharing options...
Marksnagel Posted June 24, 2012 Share Posted June 24, 2012 All of the above. Backyard Blacksmith is a really good book with a lot of pictures and information. If you put your location on your profile, there may be someone nearby that could help you. Mark <>< Quote Link to comment Share on other sites More sharing options...
Frank Turley Posted June 24, 2012 Share Posted June 24, 2012 Two books helped me get started. "The Blacksmith's Craft" and "Wrought Ironwork: a Manual of Instruction for Craftsmen" both out of London, England. I believe they are presently downloadable and printable from http://www.hct.ac.uk/Downloads/craftpublucations.html. Quote Link to comment Share on other sites More sharing options...
Words Posted June 24, 2012 Author Share Posted June 24, 2012 Yes thanks for all of your inputs. I got the Weygers and Sims books, 20 bucks for both. I'm excited for some good tips on scrap finding, resourcefulness and tool making. Is there anybody around in the east Atlanta area? I just joined so I didn't have my location profiled. Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted June 24, 2012 Share Posted June 24, 2012 Check out Danger Dillon. He's in the Atlanta area, I'm pretty sure. :) Quote Link to comment Share on other sites More sharing options...
WayneCoeArtistBlacksmith Posted June 24, 2012 Share Posted June 24, 2012 The Alex Bealer Blacksmith Association of Georgia (www.alexbealer.org) is in and around the Atlanta area. They meet the 3rd weekend of each month at a different shop each month. Sometimes closer to you sometimes a little further away. Join and then you have library privledges and can check out books. They have an extensive library. I will see you at the August meeting. The third weekend in May will be the SBA conference in Madison, Georgia. It is only about 30 miles from you to there and I'll plan to visit with you there. Let me know if I can help you otherwise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.