Forgehermet
-
Posts
28 -
Joined
-
Last visited
Recent Profile Visitors
1,175 profile views
-
I would like to thank everyone who helped me with putting my forge together, with all of your help and advice I have finally become a true blacksmith!( the first three pics are after using it for four or five hours and turning the flame off) I would like to especially thank frosty Thomas powers and buzzkill for the advice
-
This was exactly the problem and it was fixed by putting the burner into the forge, though I am yet to weld it on
-
I have recently follow frosty's T burner plans and have one problem,my burner will be running good with dark and light blue flames it will suddenly go out and I would have to re light it. any advice on how to fix this would be greatly appreciated, thanks in advance
-
Thanks will do
-
This was what I have in it now, I guess I'll see how it holds upthe first picture is what I got to replace it, should I return it?I have not opened it yet.
-
Is this what I want I thought I might layer it over the other cement
-
Thanks I ended up with two inches of wool and Putin refractory but I guess I put in the wrong refractorysince it was firebrick repair
-
I already have it it was all I could get around herewehave already layered my forge with it, is this something I could fix?
-
Ahh I am looking for rock hard and it is about 80 degrees daily here my refractory is standard "firebrick repair" Rutland refractory cement
-
How long does one inch thick castable refractory take to dry
-
Thank you, I found frosty's instructions on this forum and that is what I think I'll do!
-
Would one inch kaowool work is is two inches a must? And I looked at your t burner designs, frosty and I think that is what I will try if you think that will work.what else would you recommend for a forge outline that would replace the tubing.
-
I do not yet but plan on getting one soon
-
It is 120 lbs and probably made in 1943
-
Ok good idea never thought about that I also plan on being able to shut gas off to burners if they are not in use
