Jump to content
I Forge Iron

Ser Menalak

  • Content Count

  • Joined

  • Last visited

About Ser Menalak

  • Rank
    Advanced Member

Profile Information

  • Gender
  • Location
    Massachusetts, USA

Recent Profile Visitors

1,692 profile views
  1. Thank you everyone for the replies. I haven't gotten around to scrubbing it down and putting flour on the sides to check, I'm going to this weekend. The consensus seems that its a PW but 101 HB you say you think it's a HB repair? I agree the number definitely look like HB. Is there anyway you can describe where you see the weight numbers? I can't make anything out in the picture. For the weight, I'm thinking it's 300+ lbs from general dimension to weight charts and others have said so as well.
  2. Hello, Just today I bought another anvil, this time one that is MUCH larger than my current PW. This thing is pretty dang big.'m not sure what maker it is or what weight it is. All the markings are gone except a serial number 72131 and a 8 1 on the front foot. I believe this would mean HB or Trenton as A&H serial numbers don't go this high right? There may be more markings on the foot I just can't tell. This thing is in amazing shape, I haven't touched it, if I took a wire brush and some soap to it, it would be much easier to potentially see markings. I really don't know the weight, I
  3. So I use a brake drum forge out in the open, you can see the picture attached (embedding doesn't work). I also believe I use really cheap coal, $12 for 50lb bag. I heard that cheap coal has a lot of sulfur and so can cause metal fume fever symptoms. When I begin to coke it it caused VERY dark green fumes. Well I forged for about two hours today which is more than before and sure enough I have a sore throat. I feel like I probably breathed a good amount of smoke in because it just goes wherever it wants since I have no chimney. It's not related to zinc as my forge hasn't changed in months and a
  4. Hi guys, So I have been blacksmithing for a few months now, only about an hour or two every few weeks because of school. Every time I run into the same problem and every time I tell myself it'll be different. I have a very hard time heating what I put into the forge correctly. Today I was making a hook from 3/8 square stock and at one point I burnt off the end. It seems to always happen. As such I'm scared of keeping it in the forge long enough to even get a decent heat. I have a brake drum forge so I typically have to stick it into the coal at about a 45 degree angle due to the edges of t
  5. In a two hundred years someone is going to think these were real!
  6. Hey guys, I just bought my first actual anvil. Found it on Craiglist. It's a Peter Wright, #168. I got it for $225 and just a 20 minute drive away. The main issue is with the heel. The body of the heel is in tact well but as you can see the top part is cracked. I don't know a lot about anvil so I'm not sure how this happened, if it can or should be fixed etc. There is a bolt running through it to keep it attached. However, the horn and face are in excellent condition. There is no sway to the anvil, the edges are somewhat rough but doesn't bother me. All four feet are in perfect condition.
  7. Hello guys, So I bought a yellow Hobart Leather Welding Apron (770548). I think it's pretty common apron in blacksmithing, it's pretty cheap, on amazon, and is %100 leather. My problem is that when I get working and sweating this runs its yellow dye onto my clothes underneath. Thankfully I wear crappy clothes for blacksmithing and I think it may come out in the wash. It's like I must wear an apron.....to wear an apron. Anyways, I was wondering if you guys have this problem and if you've solved it? I was thinking maybe soaking in cold water or something but I know nothing of leather and it'
  8. Hi there, thanks for the message. I am in Leominster but frequent Worcester and took my class at Prospect Hill Forge in Waltham. Where is your shop?
  9. Hello everyone, I have made a few posts already but I thought I'd introduce myself properly. So, my name is Brendan and I live in MA, USA. I am currently a student studying electrical engineering here in MA. I believe what got me really interested in blacksmithing was the Man at Arms YouTube channel when he made Jaime Lannister's sword from Game of Thrones. I thought it just seemed so cool, not necessarily the final product but all the hammering, heat, and historical feeling (like reading next to candlelight when the power is out). I also have a minor in history though so I have always bee
  10. Hello, I have some nippers I have no use for and I want them to become tongs. I saw the $2 nippers to tongs post but I don't see instructions, just the results. The nippers are very thin on the end as they are meant to snip, so how can I get enough material from this thin chisel like end in order to form a shape to hold onto stock? If anyone knows of a tutorial or could give some instructions how to do this that would be great. I also am not sure I can take the rivet out of one pair as it is completely flush on both ends so I don't know how I would get it back in effectively. I figured do
  11. Thanks for the history John and all you guys. A lot of the anvils I see have a large amount of concavity to the face, right in the working area. Now, from what I've seen a lot of people say this isnt a big issue, especially for a beginners first real anvil. I did find one that doesn't seem to have this though but it has a crack on the heel, as in broken off. You can see it in the pics. So, would a concave face or a repaired heel be better? I know the right answer is probably neither. http://worcester.craigslist.org/tls/4608086368.html
  12. Thankyou, these all sound like fine identifiers. Is this what I should look for to know it's an ASO when I can't see it in person? What would these have been used for if they're so inferior to actual anvils?
  13. What makes you think it's an ASO? Also, Vermont is somewhat far but I would be willing to travel potentially. I am not a member of NEB or ABANA, I only took my into to blacksmithing class about a month ago (Prospect Hill Forge in Waltham under Carl) so I'm just starting. There is something called the Bolton Fair here in MA that has a blacksmithing hut with like 3 blacksmiths who work it during the fair so I'm not sure if there is any discussion of that within NEB.
  14. Hello, I have been using a railroad anvil and I feel I should move on to something bigger. I spotted this anvil in my local craigslist and I contacted the seller about whatever markings there may be on it but he has yet to get back. Could you guys help me identify the brand and what type of body this anvil has? To me it appears to have steel welded to the top but I honestly don't know. I also do not know the dimensions or if the face is very concave as it's somewhat hard to tell. What do you guys think? It is also going for $2-$3 a pound! http://worcester.craigslist.org/tls/4556620165
  15. Thank you all for this great help. I will hopefully try and implement some of this stuff soon!
  • Create New...