As mentioned in above post
There are many kinds of brass and bronze brushes.
If you go to a bowling alley you can get a bronze brush that you brush the bottom of your bowling shoes with .
It adds yet another color variation to the list .
What I usually do is brass brush it untill you are satisfied with the finish and when you get it just where you like it ( Quench it ) and it will remain at that state of finish.
Some time I will let it set there a few minutes and watch the color transformation and quench it to stop the color where i think it looks the best.
I usually shoot it with clear laquer instead of the beeswax mixture
I have put a one inch square hole thru 2 inch thick hot roll before
Drilled a 7/8 hole
Heated the 2 x 4 x 10 inch long bar to a yellow heat
Me and a striker the drove a pre forged 1 inch square drift with a long taper made from A36 thru it in two heats
we were making a brian brazeal type anvil for making hammers
I punch Hammers with the handled punch that I got from Brian on my Iron Kiss in just two heats and its only the 50 # Iron Kiss
These start out as round stock but dont finish up as a rounding hammer
My personal opinnion Is you would be hard pressed to find a finer anvil no matter which one you choose.
I have a # 9 and a # 58 but both have the side shelf.
Im a Low tech man in a Hi-tec world
Ive noticed that in the majority of students that come thru the school are I T people
Its like they woke up one day and realized that there is something on the end of their arms and they can use those things to MAKE THINGS.
I attribute the surge almost soley to the internet and videos.
I have a website
I also use etsy and Ebay a lot
I used to be on ( the face of the ME generation book ) ( facebook ) but couldnt take that any more so I deleted that.
The website has links to it from my ebay listings and etsy is just kinda there..
ETSY is pretty much useless
I think you have a pay to bring your items to the forefront or it remains burried so deep no one will ever find it.
Ive been on there a couple years and even I cant find my items unless I go to my storefront
I fired two of Wallaces guns in 1969
Also had the Colonial Williamsburg gunsmith demo for us here and he hand forged a section of rifle barrel. and part of a lock and buttplate.
Amazing stuff and gives you a whole lot of respect for what can be accomplished by hand