bigb Posted October 16, 2017 Share Posted October 16, 2017 I tried using some 3/4 ' flexible metallic conduit today but it is just too heavy, it wants to pull against my burner assembly and I am afraid it will damage the small 1/8" pipe or pull everything off center. I thought about some kind of support but I tend to move the forge around, plus my roof in my work area cranks up and down so that won't work too well. I am going to pick up some aluminum 3/4" flexible conduit, it weighs less than 1/2 what the steel weighs, and try that. Quote Link to comment Share on other sites More sharing options...
JoeThePro Posted October 16, 2017 Share Posted October 16, 2017 What about using the braided stainless steel propane hoses? I believe I've seen 25 ft. versions. Quote Link to comment Share on other sites More sharing options...
genesaika Posted October 16, 2017 Share Posted October 16, 2017 I'm not sure what type of forge you have, but couldn't you build the support onto the forge? Just an L bracket or like a plant hanger. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 16, 2017 Share Posted October 16, 2017 What is your forge set on for working? I have mine bolted to a cart. It would be very simple indeed to bolt a support arm to the cart as well and use some duct tape to fasten it to the arm... Quote Link to comment Share on other sites More sharing options...
bigb Posted October 17, 2017 Author Share Posted October 17, 2017 It's on this 3 legged stainless steel adjustable meat plant scale table that I got for free. I like it because I can set the height so I don't have to bend over to look into the forge. I thought about a support arm, maybe I'll make one coming off the shaft that can rotate out and away from the forge. Duct tape? hmmmmm... I didn't think of that either. I guess I am not really a duct tape kind of guy Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 17, 2017 Share Posted October 17, 2017 Have you ever seen the set up used for washing dishes in a restaurant? Search on: Restaurant dish sprayer images Or get an IV stand and hook the hose to it. Quote Link to comment Share on other sites More sharing options...
Mikey98118 Posted October 17, 2017 Share Posted October 17, 2017 Fosty uses annealed copper refrigeration tube between his burners and the fuel hose; you might want to look into doing the same. Quote Link to comment Share on other sites More sharing options...
bigb Posted October 18, 2017 Author Share Posted October 18, 2017 I have thought about that but it's getting to the point where I need to be done setting up my shop and actually use it. I am going to rig up a support like Thomas suggested, although not sure about the duct tape. Thomas as many times as I have driven through Socorro one of these days I should stop and buy you lunch. Or bring you something from Arizona. Do you need any cactus? Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 18, 2017 Share Posted October 18, 2017 We have our own cacti! Do you come out HW 60? (Through the old mining towns.) As I work in Mexico most days I'm down near El Paso so if you are thinking about it let me know ahead of time and I can be in Socorro for the Weekend. By the way they have totally redone the Mineral Museum at NM Tech; new building and all. Quote Link to comment Share on other sites More sharing options...
bigb Posted October 18, 2017 Author Share Posted October 18, 2017 We come straight up I-25 into Santa Fe or Las Vegas. In July we spent a week in Mora. (Cleveland actually but everyone thinks that is in Ohio). Planning to retire soon and will likely spend summers up there, will be doing a lot of day trips and exploring then. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 18, 2017 Share Posted October 18, 2017 How do you get from Arizona to I 25? I-10, HW 60? ??? I'm about 2 miles off an I-25 exit near Socorro; but can see it from the house as it's the offset frontage road sort of thing... Have you checked out Ruidoso? Quote Link to comment Share on other sites More sharing options...
genesaika Posted October 18, 2017 Share Posted October 18, 2017 Wow reading y'all's conversation is bringing back memories. I use to live in Alamogordo, well hollowman AFB. In fact my ex sister in law lives in Carlsbad. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 18, 2017 Share Posted October 18, 2017 Come on back---there's plenty of room out here! Quote Link to comment Share on other sites More sharing options...
bigb Posted October 19, 2017 Author Share Posted October 19, 2017 8 hours ago, ThomasPowers said: How do you get from Arizona to I 25? I-10, HW 60? ??? I'm about 2 miles off an I-25 exit near Socorro; but can see it from the house as it's the offset frontage road sort of thing... Have you checked out Ruidoso? We take I-10 to Deming then 26 to Hatch where we get on I-25. Been to Ruidoso a few times....years ago. Just had a friend move up there though so we will no doubt go visit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.