basher Posted May 11, 2017 Share Posted May 11, 2017 Here is the latest blade I have made its a comission , going onward to Petr Florianek to do some handle and sheath magic on... The construction is as follows. Wrought iron on the spine then 2 bars of alternate twist and straight. These bars are made up of 7 layers 4 of which are actually 40 layer’s. Its a subtle twist pattern. There is another layer of wrought iron and then that is tooth welded with 360 layers of steel at the edge. the blade is a tad under 20" The Tip The Blade close up closer up Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted May 11, 2017 Share Posted May 11, 2017 I really like this one Quote Link to comment Share on other sites More sharing options...
D.IVO Posted May 11, 2017 Share Posted May 11, 2017 Gourgeous blade especially the pattern of the spine. Superb work Quote Link to comment Share on other sites More sharing options...
Daswulf Posted May 11, 2017 Share Posted May 11, 2017 What they said. Beautiful work! Quote Link to comment Share on other sites More sharing options...
C-1ToolSteel Posted May 11, 2017 Share Posted May 11, 2017 One of my favorite Damaskus patterns I have seen. Beautiful! Quote Link to comment Share on other sites More sharing options...
Will W. Posted May 13, 2017 Share Posted May 13, 2017 Very nice! The patterns are captivating. Quote Link to comment Share on other sites More sharing options...
beech Posted May 13, 2017 Share Posted May 13, 2017 I really like the different layer densities. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.