Kenny O Posted April 7, 2015 Share Posted April 7, 2015 (edited) I have emailed miller three times with no results.... I wanted to put a newer tig torch and foot pedal on this machine ...I just traded for it.The blue one in the photo. Edited April 7, 2015 by Kenny O Quote Link to comment Share on other sites More sharing options...
arkie Posted April 7, 2015 Share Posted April 7, 2015 (edited) You can usually download most docs from the Miller website. If not, cruise on over to www.weldingweb.com and post your problem there. Probably a better source of info on welders. Edited April 7, 2015 by arkie Quote Link to comment Share on other sites More sharing options...
Glenn Posted April 7, 2015 Share Posted April 7, 2015 Emails can get lost. Call them directly. They have always been helpful in the past. Quote Link to comment Share on other sites More sharing options...
Frosty Posted April 7, 2015 Share Posted April 7, 2015 Most outfits don't pay a lot of attention to E-mail, there's just too much spam coming in to commercial outfits. If you're already corresponding is one thing, but a cold enquirey is another, too many phishers do that pretending to be a customer. Phone works best.Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted April 7, 2015 Share Posted April 7, 2015 Miller also has an internet forum that you may be able to get the manual from. Quote Link to comment Share on other sites More sharing options...
Kenny O Posted April 7, 2015 Author Share Posted April 7, 2015 Thanks gents, I will give them a call. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.