hawk18 Posted May 12, 2019 Share Posted May 12, 2019 Got this in a box of goodies. Entire tool is hardened. Edges are chalked to show Demensions/taper. Curvature is approximately based on a six inch radius. Thin edge is not sharpened. Neither edge has been beat on by a hard hammer. Shows signs of being hand forged. Thought it might be a cooperage tool but can find no pictorial evidence of that. Thought it might also be for knocking the tire bead off a 12" rim. What say you experts? Hawk Quote Link to comment Share on other sites More sharing options...
KLO Posted May 15, 2019 Share Posted May 15, 2019 I found a few of these from an old blacksmiths forge on my property, but they had been rusted out a heap and they had much shorter handles, im as lost as you Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted May 15, 2019 Share Posted May 15, 2019 Looks like an auto body slapping spoon to me. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted May 15, 2019 Share Posted May 15, 2019 I was thinking that too, but to one side is thicker than the other which on a body spoon/paddle would tend to be the same thickness. Plus the thinner edge is protruding more which wouldnt make sence. Quote Link to comment Share on other sites More sharing options...
duckcreekforge Posted May 27, 2019 Share Posted May 27, 2019 Power hammer hack knife? of the curved variety, which, of course, is not sharpened, is thicker on top edge, thinner on the bottom edge and the protrusion works for the function of the tool. Was there a power hammer anywhere near? Quote Link to comment Share on other sites More sharing options...
seldom (dick renker) Posted June 1, 2019 Share Posted June 1, 2019 European farriers use a tool similar to this instead of hoof nippers. also some times used for trimming oxen feet. Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted June 1, 2019 Share Posted June 1, 2019 It’s a sole knife. Used to pair (exfoliate) the sole when it is hard and overgrown. Quote Link to comment Share on other sites More sharing options...
KLO Posted June 4, 2019 Share Posted June 4, 2019 so an old hoof knife? rightio, I might look at what I got Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted June 4, 2019 Share Posted June 4, 2019 Not exactly. A hoof knife is a form of curved knife like bowl and spoon carvers use. A soul knife is a heavier tool driven by your driving hammer (the light hammer you use to drive nailes as opposed to your round or shaping hammer used to shape shoes). Most often yo can use your hoof knife but some times facing false soil and extreme dry weather one needs a bit more rugged tools driven with a hammer. as to trimming the hoof, nippers are a relatively new development. Rasps and knives being the standard. We had a Japanise fellow at the showing school. He was qualified as a trimmer, but was unwilling to compleat an 11 year apprenticeship, so he came to Oklahoma for school. Anyway he had a rather traditinal “knife with a blade 90d to the handle that he trimmed hoves with. The instructors insisted he learn to use nippers, but they didn’t prohibit him from using his traditinal tools after he showed proficiency with nippers. humans have been dealing with horses feet longer than they have forged steel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.