Jump to content
I Forge Iron

Axe Head As Hot Cut?


Recommended Posts

Will an axe head work decently well as a hot cut? I seem to remember someone on this forum mentioning that they had done it, but I can't find it now despite much searching. The main reason I'm wondering is because I got a Douglas axe head (if Douglas happens to be a sought after brand, please let me know before I potentially modify it irreversibly) for free in a box of rusty tools, that I don't really have any other use for.

If there are no problems with using an axe head as a hot cut, what would be a good option for mounting it upright? Would encasing all but the top few inches in a block of cement be a viable option?

Thanks!

Link to comment
Share on other sites

I don't have a vise meant to withstand hammering yet, so clamping it in a vise isn't an option. Could you elaborate on what would makes the cement a bad idea? I'm not doubting that you're right, just trying to better understand this type of thing for the future.

I suppose that leaves me with your recommendation of mounting it in a stump. I'm assuming (correct me if I'm wrong) that you mean to carve a slot into the stump that the back of the axe head fits into snugly. The possible problem I see with this option is that since the axe head is  shaped like a wedge. Wouldn't this make it be able to wobble back and forth in the carved hole, making it difficult to cut metal with?

Thanks for the help!

Link to comment
Share on other sites

While concrete could work it is likely to crack or break around the axe head. Plus having it removable is good since you might need to to dress it. 

Yes that was one thought with cutting a slot in the stump. You could tighten the axe head in with a wedge to take up any irregular gap.  

Another option would be to heat and reshape the back of the axe head to be more square to fit better.

Yet another option (if you had access to a welder) could be to weld a spike on the back and drive it in. (You would want to use a block of wood across the grain invetween the hammer and axe edge. )

 

 

Link to comment
Share on other sites

  • 2 weeks later...

I'm in central Mass. I do have a 180# (stamped 213#) Wilkinson Queens Dudley anvil, but the heel was broken off at some point in it's life. The rest of it is still in decent shape, so the only main features it's missing are the hardy and pritchel hole.

Link to comment
Share on other sites

17 hours ago, Chelonian said:

I'm in central Mass.

If Jennifer was offering to meet up and help me out I'd be jumping at the chance.  If you aren't comfortable giving out more detailed info on the forum send her a PM, but do not miss out on this opportunity if it's anywhere near a viable option for you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...