bryson489 Posted May 14, 2017 Share Posted May 14, 2017 Making some progress on this hunk of metal. Wanted a fixture table to do scroll work and other work with hardy tools. Most holes are gonna be 1" for the tools, and a couple other sizes for drifting holes. This is the final pass on the bottom. Just have to do a second round on the top, finish the sides, then level it off on the mill. Quote Link to comment Share on other sites More sharing options...
Hibby Posted October 20, 2018 Share Posted October 20, 2018 That looks like a lot of work Quote Link to comment Share on other sites More sharing options...
tkunkel Posted October 20, 2018 Share Posted October 20, 2018 Any finished picture? Quote Link to comment Share on other sites More sharing options...
Frosty Posted October 22, 2018 Share Posted October 22, 2018 The post is 17 months old. I'd like to see how it tuned out too but. . . <sigh> Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
anvil Posted October 25, 2018 Share Posted October 25, 2018 Probably still cleaning up all those welds, or couldn't get a loan to cover the expense of all the grinding disks. Quote Link to comment Share on other sites More sharing options...
Exo313 Posted October 26, 2018 Share Posted October 26, 2018 You know. I'm thinking... Next welder trainee at work should get this project. That's a lot of practice both laying down beads and grinding! Quote Link to comment Share on other sites More sharing options...
Glenn II Posted November 5, 2018 Share Posted November 5, 2018 We always said in the Fab shop, "If you aren't a good welder, you'll learn how to be a good grinder!" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.