Jump to content
I Forge Iron

Electroplating?


natedogg56

Recommended Posts

Hi all,

Just wondering if anyone has had experience plating their work?  I make a lot of small objects (spoons, ladles, bottle openers etc...) and have wondered about getting some plated.

How easy is it to plate hand forged work?  My work is relatively rough (hammer marks etc...), I've been told it is much easier to plate smooth objects, I presume all scale etc. would have to be removed.

I'm sure there are other things I haven't considered, so any thoughts or advice would gratefully received.

Cheers,

Nate

 

Link to comment
Share on other sites

Check out Caswell plating http://www.caswellplating.com/electroplating-anodizing.html?gclid=CJ2goOHvjssCFQmqaQodNSYPGQ

They sell "do it yourself" kits for all sorts of plating and anodizing but also have a lot of general information about what's involved if you sort through the sales information. 

About 400 years ago I had a little gold plating kit--results came out pretty well but I was just a kid making gold colored pennies. 

Link to comment
Share on other sites

Main thing in electro plating is to get surfaces clean.  Not just soap and water clean but chemically clean.   This involves stripper solutions and different steps depending on what your terminal goal is.   I worked for a very brief time in an electro plating unit.  ( I left when I realized that the only thing between me and death or serious disability was my own and my coworkers awareness of the dangers involved #Before OSHA#)  You can do a semi job of throwing some copper  on Iron with out much effort.  but any thing more is serious study and a little expense.

Link to comment
Share on other sites

Ah, science in jr. high school where we learned to dissolve copper in sulfuric acid and plate . . . stuff using a trickle of DC current, model train transformer. Heck, you could buy cupric sulfate at almost any dime store or pharmacy marketed in chemistry set labels. Ah the early '60s when a kid was allowed to do dangerous stuff. The kids who wouldn't or couldn't read the instructions and take precautions sometimes chlorinated their end of the gene pool early enough to do some good. And NO I'm not talking about home made contact explosives and thermite!

Frosty The Lucky.

Link to comment
Share on other sites

For all of the Silver and Gold hardware I use fro my blades, I have a commercial place plate it for me.  I love it: I tell then the intended use, and explain I qam in no hurry, so I may wait a two weeks, but they plate it when they run another batch, saving me a lot of money against having them set up the plating tanks for only my 3 small pieces.

The last time was double layers of Stirling Silver (Silver was selling @ $8.00 oz at the time) 4 pieces cost me $75.00 finished; for a cape, throat, pommel and bolsters, which I made of brass.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...