Hi, I was wondering if anybody has used this blower and if it is any good http://www.grainger.com/Grainger/DAYTON-PSC-Blower-1TDR3?cm_sp=IO-_-IDP-_-RR_VTV70300505&cm_vc=IDPRRZ1

 

Thanks,

Sam

Good for WHAT???? Changing the air in a lavatory??

 

Wherebe is that that you is??  Add your location to your name. Sam Newbie calls home, Ditch twelve :) :)

 

Neil

If you are looking in grainger check out the shaded pole blower, it has a round outlet with a flange

make suer it has the cfm's your looking for

Coal forge?  Charcoal forge? Propane forge, What size propane burner(s)/forge?

sorry. for use in a brake drum coal forge ^-^

You can see my design in the solid fuel forge section.

Has anyone had any luck with this blower http://www.amazon.com/Dayton-463-cfm-Exhaust-cord/dp/B0002HTF52/ref=pd_sim_sbs_hi_4

its 400 cfm and I was thinking I could hook a dimmer switch up to it to adjust the power its for this forge here :'?do=embed' frameborder='0' data-embedContent>>

 

Thanks,

Sam

Sam,  400 cfm may be more than you want, with the dimmer switch make sure it can handle the amperage or the switch will burn up.

Larry

Sam: Dimmer switches can be problematical, where a simple swing/knife valve over the intake will do the job without risking electrical components.

 

Frosty The Lucky.

thanks guys I just got a buffalo hand crank so no need for this.

 

Thanks