dsloan Posted June 23, 2011 Share Posted June 23, 2011 Folks, I started on this project recently and thought I'd share it with you folks. For those Little Giant fanatics out there this one of rarest you'll see. In about 1995 Little Giant of Nebraska City had a run of Miniature hammers cast. There was only 13 cast in all. If anyone has been to Nebraska City and visited the shop they've seen Sid's. These are cute little hammers. Sid assembled the first few and also donated several to ABANA in the first years, but as of the last few years he sold off a few as just the frame and the fly wheel. On one of my last visits I noticed he had only one left. After having spent the last few years working with Sid on hammers and knives I approached him about building up the last one and he agreed. Hopefully my first pictures attached themselves. They will show what I've started with and hopefully indicate the size. The hammer positioned next to it is a 8 ounce ball pein. Dave from Diller Quote Link to comment Share on other sites More sharing options...
AndrewOC Posted June 23, 2011 Share Posted June 23, 2011 That is way cool,Dave. Reckon it will do 2 inch round?? I've heard of B&S Massey working models, but haven't seen a picture yet. AndrewOC PS, of course I want one now. Quote Link to comment Share on other sites More sharing options...
monstermetal Posted June 23, 2011 Share Posted June 23, 2011 That is super cool.... It looks just big enough that you could actually work under it... Maybe drawing out paperclips? Quote Link to comment Share on other sites More sharing options...
WmHorus Posted June 23, 2011 Share Posted June 23, 2011 Oh that is cool as hell, now I want one to play with..... Quote Link to comment Share on other sites More sharing options...
Sask Mark Posted June 23, 2011 Share Posted June 23, 2011 Now that is awesome! Definitely something that would be cool to have on display. Run it off on of those gas engines for remote control cars. Quote Link to comment Share on other sites More sharing options...
WmHorus Posted June 23, 2011 Share Posted June 23, 2011 hehehehe Like Larry said paperclips then heat them with a small butane torch and see what you can do...probably could make tiny leaves :P Quote Link to comment Share on other sites More sharing options...
mat Posted June 23, 2011 Share Posted June 23, 2011 is this the same hammer? Quote Link to comment Share on other sites More sharing options...
dsloan Posted June 24, 2011 Author Share Posted June 24, 2011 Mat, No this isn't the same kind of hammer, but man that was cool. Here are a couple of photo's of the parts and the frame in primer. (I'm thinking purple is a good color) The folks that have seen these little hammers have suggested everything from pocketwatch parts to leaves. I hadn't heard paper clips though. hmm hmm. Dave from Diller Quote Link to comment Share on other sites More sharing options...
dsloan Posted June 25, 2011 Author Share Posted June 25, 2011 Here are some photo's of the size of the hammer next to a calender and photo of the fly wheel detailed out. For those that have been wondering this would hammer would be rated at a 1 pound. The ram weighted in at a pound. In the event of humor we could call it a "POUNDER". Dave from Diller Quote Link to comment Share on other sites More sharing options...
monstermetal Posted June 25, 2011 Share Posted June 25, 2011 That is just too cool... I have not seen it with my own eyes but I have heard stories that a very well known knife maker in Olyimpia WA has a mini Nazel hammer... Desk top size, but considerably larger than the little LG... I think it has a 15lb ram... Quote Link to comment Share on other sites More sharing options...
Don Hanson Posted June 26, 2011 Share Posted June 26, 2011 Dave, too cool man! Folks, I've seen a couple of these Sid has built in person and they are over the top! Quote Link to comment Share on other sites More sharing options...
Hayden H Posted August 2, 2011 Share Posted August 2, 2011 I gotta find one of these Quote Link to comment Share on other sites More sharing options...
Francis Trez Cole Posted August 2, 2011 Share Posted August 2, 2011 that is very cool Quote Link to comment Share on other sites More sharing options...
dsloan Posted August 4, 2011 Author Share Posted August 4, 2011 Here are a few of the final assembly pics. Dave from Diller Quote Link to comment Share on other sites More sharing options...
Sask Mark Posted August 4, 2011 Share Posted August 4, 2011 I still can't get over how cool that is. Nice job! Quote Link to comment Share on other sites More sharing options...
macbruce Posted August 4, 2011 Share Posted August 4, 2011 Sweet! I love that kinda stuff.....When do we get to see it stretch it's legs on some hot steel? Quote Link to comment Share on other sites More sharing options...
Hayden H Posted August 4, 2011 Share Posted August 4, 2011 Do you know how much one of these would cost? Quote Link to comment Share on other sites More sharing options...
Frosty Posted August 4, 2011 Share Posted August 4, 2011 All I want to say is how happy I am you've painted it in my shop colors. I'll send my mailing address on the side. <wink> Frosty the Lucky. Quote Link to comment Share on other sites More sharing options...
Don Hanson Posted August 6, 2011 Share Posted August 6, 2011 The first time I saw one of these was at a knife show back in 97-98 in St.Louis and I bout freaked out. Was the first time I met Sid also, we've been good friends ever since. He also had a brand new 100#er in the back of his truck. Dave, great job, it's lookin fantastic!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.