Ron Hicks Posted December 27, 2006 Share Posted December 27, 2006 Hi my name is Ron been hangin around and readin some good stuff here. Ive been beatin out knife blades for a few years but want to get in to Blacksmithing. When I started I did not know anything and bought a pickup load of coal in Kansas. Thats stuff was junk, it made loads of clinkers. I ordered a 50 lb. bag of coal from Centaur Forge to see what good coal was like. I started messin with a gas forge and used it for a few years switched to charcoal ( which I like but $)and never tried the coal till the other day. Hey thats good stuff I forged for 5 days with that 50 pounds & I havent any experence with anything other than knives - not even real sure Im tending the fire right yet. I think I may order more from them a 50 pound bag is $22.00 and my shipping be another $ 20.00 guessin aroud $42.00 for 50 pounds. Thats not to bad is it ? Im sure If I could find some good coal with in driving distance it would be less, at least I know what good coal looks like now. Anyone have a clue where I might find good coal I live in NW Arkansas Thanks Ron Quote Link to comment Share on other sites More sharing options...
yesteryearforge Posted December 27, 2006 Share Posted December 27, 2006 about 110 to 130 a ton around here Quote Link to comment Share on other sites More sharing options...
Mike Turner Posted December 27, 2006 Share Posted December 27, 2006 Ron, Find a farrier supply shop they usually have coal. $42.00 a bag is expensive. I pay $14 at one shop and $25 for really good coal at another. Try here as well The coal I like is Cumberland Elkhorn coal and coke out of Kentucky that is the $25 dollar a bag you can order right from them I have not yet but it looks like I am going to have to as I live now where there is little coal to be had. Quote Link to comment Share on other sites More sharing options...
Archie Zietman Posted December 28, 2006 Share Posted December 28, 2006 I just tried out corn which, if you have a local garden/agriculture store nearby is dead cheap, and work exactly like coal, just burns a bit faster. Quote Link to comment Share on other sites More sharing options...
easilyconfused Posted December 28, 2006 Share Posted December 28, 2006 Archie, do you just burn the corn as is, or is there a special treatment you have to go through? I use charcoal I've made, but I have a steady supply of wood on the farm and a wood burning stove to use. I just pull the embers out of the stove and smother them in a metal barrel with a airtight lid. The only problem I've had is when I miss a nail and I'm trying to weld. Otherwise it burns clean and the only problem I've had is that I go through softwood charcoal faster than hardwood, but I've successfully welded with both types. Quote Link to comment Share on other sites More sharing options...
Archie Zietman Posted December 28, 2006 Share Posted December 28, 2006 It's kernels of corn, dried. I just used cracked corn from a nearby farm store, 50 pounds for ten dollars, if I remember rightly. Just rip open the bag, start a fire with old coke and some charcoal, then pour the corn around it to coke, and just work it like coal, outside in. Quote Link to comment Share on other sites More sharing options...
Archie Zietman Posted December 28, 2006 Share Posted December 28, 2006 oh, and I got to welding heat with the corn. I use wood too, can't be bothered to charcoal it, just chop it up into little rough half-thumb sized pieces and forge with that, though I haven't tried welding. Quote Link to comment Share on other sites More sharing options...
Gary Posted December 28, 2006 Share Posted December 28, 2006 Mike Turner, there's a farrier supply in Junction City that carries Cumberland. I think it was 22.00 a 50lb bag last time. Ft. Vancouver gets our coal there. Let me know if you want the name. Quote Link to comment Share on other sites More sharing options...
Ed Thomas Posted December 28, 2006 Share Posted December 28, 2006 Ron, even bagged pea coal here in Virginia is only somewhere around $5 for a 40 lb bag. I get it delivered loose and the last time it was about $175 a ton. So I'd say that your cost was a bit outrageous. Looking on the internet, I found these coal producers in Arkansas: Johnson Co. R & S Coal Company, P.O. Box 377, Scranton, AR 72863 Russ and Sons, Inc., P.O. Box 1609, Greenwood, AR 72936 Logan Co. R & S Coal Company, P.O. Box 377, Scranton, AR 72863 Sebastian Co. Comer Mining Company, Greenwood, AR 72936 Maybe you can contact them to see who buys it from them local to you, or maybe you can even go them and buy it. Usually, delivery requires a minimum order of several tons, though. My impression, glancing over the links, is that some Arkansas coal is metallurgical grade (the best), so you should be able to buy it there. If I find out anything else, I'll post it. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 28, 2006 Share Posted December 28, 2006 Ron---where do all the *OTHER* smiths in NW AR buy their coal? There is a passel of them and a lot of knifemakers up there. We used to buy ours from the Stone County Ironworks but that's been about 30 years ago. Do you go to the local ABANA chapter meetings? Quote Link to comment Share on other sites More sharing options...
Ron Hicks Posted December 28, 2006 Author Share Posted December 28, 2006 THanks Ed & Mike Ill check it out ED Archie burnin corn? I like charcoal but goes to fast, think I want good coal. Have you ever tried good coal? Its hard to beat If you ask me Thanks Ron Quote Link to comment Share on other sites More sharing options...
Ron Hicks Posted December 28, 2006 Author Share Posted December 28, 2006 Do you go to the local ABANA chapter meetings? No I havent- but I guess I should I have emailed Tom Upton he is near to me. Ive went here but did not look like anyone used it BOA Home Page Can you tell about the ABANA chapter meetings? I really want to learn Ron Quote Link to comment Share on other sites More sharing options...
Ron Hicks Posted December 28, 2006 Author Share Posted December 28, 2006 Ron---where do all the *OTHER* smiths in NW AR buy their coal? There is a passel of them and a lot of knifemakers up there. We used to buy ours from the Stone County Ironworks but that's been about 30 years ago. Do you go to the local ABANA chapter meetings? Thomas I havent gotten with any local Blacksmiths I guess I thought I did know enough to be buggin them.Ive just been on my own & reading books. Tell me about the ABANA chapter meetings. Ron Quote Link to comment Share on other sites More sharing options...
Woody Posted December 28, 2006 Share Posted December 28, 2006 I buy "Pennsylvania Blacksmithing Coal" in Rapid City SD, (3 40 lb plastic bags) for $8.30 a 40 lb bag which makes it $24.90 for 120 lbs. the stuff is 13,500 btu per lb. Works great very few clinkers. If you are paying $42 for 50 lbs of coal you are getting ripped big time. Shipping is the biggest expense in the cost of coal. Check you local ABANA Chapter bet they know where to get good coal at a reasonable price. Quote Link to comment Share on other sites More sharing options...
rthibeau Posted December 28, 2006 Share Posted December 28, 2006 While googling the contact info for our coal supplier, I came across this page of the Appalachian Blacksmiths Association websiteCoal & Coal for Sale They have contact info for several suppliers..the Sewell vein is what we get from the Green Valley Coal Company. The trick is to buy a full truckload...up to 30 tons....to get the best price and mitigate the shipping cost. Quote Link to comment Share on other sites More sharing options...
Leah Posted December 29, 2006 Share Posted December 29, 2006 Ron, there is a pretty active blacksmith group in Harrison, Arkansas. They are a nice bunch of guys. I think (but don't quote me on this) they sell coal to members at their meetings. You can call their president, Tom Upton in Rodgers, at number removed . His email is email removed. You can go to the ABANA chapter site to find a link to them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.