Archie Zietman

Members
  • Content Count

    597
  • Joined

  • Last visited

About Archie Zietman

  • Rank
    Senior Member

Converted

  • Location
    Massachusetts USA

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Dave, I completely agree about the cheapest thing to do being replacing the blower. After an hour of trying to soundproof the little fella (it does look oddly like a siren...hmm...), I gave up, and I'm getting a chunky 60cfm fasco blower. I had an excellent 10cfm fasco which lasted me years before I gave it away, and apparently it's still running and whisper quiet as ever in it's new home, so I'm hopeful. It's rpm are a third of the noisy blower, yet it pushes 3 times the air, and it's a lot quieter (I saw one in action at the forge at a local college) and I can also use it for more than just the small gas forge. I'm not worried about the pressure, as I'm not dealing with coal. Thanks for all the advice, everyone!
  2. My shop is actually open to the air, so putting it outside won't really work. I tried putting it in a box with 3 inches of foam to dampen the sound, but it was still about as loud as a skilsaw, unfortunately. My neighbours are rather crotchety, and don't take kindly to even basic construction, so I'm actually looking into just getting a quieter blower. It would cost me more to return the blower than I paid for it (I have to pay for shipping) so I'm looking into other blowers. Do any of you have experience with this one? I've hear it's quite quiet, the motor turns half as quickly as the little one, so it should be quieter, I am thinking a (60 cfm fasco centrifugal blower) Thanks! Archie bad link removed
  3. Heyall, So, I just got, in the mail, a little blower. It is tiny, but supplies a ton of air for it's size, which is excellent, my only problem is that it is as loud as a full sized vaccuum cleaner, or a circular saw. Not pleasant. So, I'm looking into ways to dampen the sound, because if I don't, it will drive me insane. I'm thinking of putting it inside of a heavily padded box, but with air vents so that it doesn't over heat. Sound like a good idea? Any others? Are there commercially available sound dampening paints or somesuch? I don't think that wrapping it with chain will help, unfortunately. Thanks! Arch
  4. Hey Folks, I'm just wondering whether there are solders out there that are copper colored. If I want to solder together a few ornamental copper pieces, is there any way do do it such that the solder doesn't stick out like a big silver thumb, or is that the way of things? thanks in advance, Archi
  5. Hello. So, I have started taking commissions in earnest in my ironwork business (called Ironfish) and am having to think about shop rate. How do you all determine it? Thanks a bunch, Archie
  6. Before even fullering, I'd put the point on the mass you are about to isolate, if they are spearpoint finials. That has saved me tons of trouble many times. best of luck, Archie
  7. It might be a bit of a schlep, but Williams Coal in Braintree MA supplies actual "blacksmith coal" to most of the blacksmiths in New England. I just got 400 lbs of the stuff, and it has very little smoke, and little clinker. You might try them. Chip, the coal guy, is real nice.
  8. You could also take the steel disk, and take a punch about 1/4 or 1/2 inch less in diameter, and sink the center in, so you get that nice raised rim that some buttons have, then dress the edges and drill your holes. Cool project!
  9. I wasn't punching them because the area I was working was extremely small. Going to forge weld on a slightly larger piece of stock, and then I'm going to punch them. You are definitely right about punching being easier. It might seem like a drill is, but you are taking away all of the metal in the hole as opposed to relocating it, which can make it look bad much easier.
  10. A lot. I just almost finished a pair of loop-welded spatula handles. Everything was perfect, and then I went to drill the holes. On a half inch thick piece of steel a millimeter offcenter makes a huge difference. Gonna cut the ends off and forge weld on a slightly thicker piece of stock to try again. I don;t want to throw away the handles if I don't absolutely have to. I really should get a drill press to drill at 90 degrees to the work. thanks for letting me mini-rant, a somewhat put out Archie
  11. What is the website for? Bob's backyard blacksmithing? Bob Ironwork co? That would help as to what calibre of images you need. If you mean photos, I am assuming you have your own shop, if you have an ironwork website. Get someone to do a couple photographs. If your setup en't pretty, do anvil closeups or vise closeups or fire closeups. Or do you mean logos and things? If so, draw some. It's not hard to figure out something original to do with some hammer shapes some people shapes and some anvil shapes. good luck! be merry, Archie
  12. Right now I'm outside under a room with one wall. I really just need a way to keep the smoke around the flame until it is burned, as opposed to being blown away and buffeted by the wind. I'd be very interested in pictures though, thank you.
  13. Thanks everyone for the replies! I think I will keep my coal dry for the moment to avoid yellow-white billowage. I will however put in a 55 style fire-hood-chamber thang. I now prefer cloudy days for forging: Nobody sees the smoke. be merry, Archie
  14. Hello. So, today my forge fire (coal) got smokey on me for the first time in about a month, and, being in a densely populated area, I can't really have that. This got me thinking about wetting my coal. I know it helps the coking process somehow (so says The Blacksmith's Craft manual from the English rural commission) but does that entail more smokiness? slower coke-age? Anyone wet their coal? How does wetted coal compare to dry in terms of smoke and yield of coke? Thanks, Archie