junker Posted April 21, 2009 Share Posted April 21, 2009 so i have a HF hammer (problem #1) and last night i was just messing around and trying to cold forge (problem #2) a leaf, i got a little mad at the slow progress and hit the leaf pretty hard (problem #3). my hammer leterally broke in half and landed on my foot... not the handle mind you, but the HAMMER :mad::confused::mad::confused:... so my advice is: don't combine cold forging with HF hammers Quote Link to comment Share on other sites More sharing options...
easilyconfused Posted April 21, 2009 Share Posted April 21, 2009 Hope you can return it! That's pretty hard on your anvil too ;) Quote Link to comment Share on other sites More sharing options...
rthibeau Posted April 21, 2009 Share Posted April 21, 2009 No consolation now, but you really do get (only as good as) what you pay for. Sheet metal can be cold forged, but not much more than 18 gauge unless it's like copper. Quote Link to comment Share on other sites More sharing options...
Charlotte Posted April 21, 2009 Share Posted April 21, 2009 so i have a HF hammer (problem #1) and last night i was just messing around and trying to cold forge (problem #2) a leaf, i got a little mad at the slow progress and hit the leaf pretty hard (problem #3). my hammer leterally broke in half and landed on my foot... not the handle mind you, but the HAMMER :mad::confused::mad::confused:... so my advice is: don't combine cold forging with HF hammers Cold forging is not a bad thing. Cold forging past the point at which the metal wants to move is a bad thing. Cold forged metal needs to stress relived every so often because the crystals are getting over stressed. Annealing cold worked metals, if they need more work, is a good thing HF is not a bad thing unless you expect to serious use out off it. Take the chips back to them for a refund. Go to Sears and buy one of their blacksmith hammers. Not expecting High performance out of Low performance materials is good thing. Getting frustrated and hitting harder is a bad thing. Stopping and working on something else like a a cold drink or cleaning up around the anvil is a good thing. Got it? Quote Link to comment Share on other sites More sharing options...
MattBower Posted April 21, 2009 Share Posted April 21, 2009 In my experience, HF has a very friendly return policy. I've known them to accept returns without a receipt -- for store credit only. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 21, 2009 Share Posted April 21, 2009 As cheap as their hammers I I would save the pieces and mount them on your wall of shame! I have a collection of anvils on my wall of shame including one where the base broke off from the top half---the weight stamps are on the base so I know it once was a complete anvil. Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted April 21, 2009 Share Posted April 21, 2009 I agree with Charlotte. I have a Craftsman crosspean and it has lasted very well these many years. However, my preference is a Hofi hammer, and sometimes a Swedish hammer. But for cheap, you can't beat a crosspean from Sears. .... Go to Sears and buy one of their blacksmith hammers. ...... Quote Link to comment Share on other sites More sharing options...
Frosty Posted April 22, 2009 Share Posted April 22, 2009 Getting frustrated and hitting harder is a bad thing. Stopping and working on something else like a a cold drink or cleaning up around the anvil is a good thing. Got it? Doggonit Charlotte I'm getting to like you better all the time. There is no merit to taking your frustrations :mad: out on your tools, especially the cheap ones. Frosty Quote Link to comment Share on other sites More sharing options...
Reid Neilsen Posted April 22, 2009 Share Posted April 22, 2009 You will go to "you know where" for doing that...workin it cold that is LOL. Thats what they say ;) Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 22, 2009 Share Posted April 22, 2009 As for cheap I can buy a bucket of hammers at the fleamarket for the price of buying a new one at Sears! Of course only 2 or 3 in that bucket will be craftsmen... For high priced hammers---I bought my french and sweedish crosspeins used at Quad-State. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.