-
Posts
135 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by royce unruh
-
-
is that a ifi shirt i see at 1:13
-
i had started grinding on it but my friend rhett bugged me till i heated it up and twisted it. when i heated it up again it turned dark colored again so i had to try to shineit inside the twist. this is my first that was twisted it was a learning experience for shining up inside the twist so i bought a dremmel 7700 but i still couldnt get all the grinder marks off of it.
-
-
yes you do ocasionly have to reset it well mine anyway i used a metal plate to set my anvil on (just cause it was there) heres the link its on this same site it might not be the best ideaout there but its an idea http://www.iforgeiron.com/topic/28374-royces-anvil-stand/
-
um oooooookaaaayyyyyy
-
were those pages ever posted as i would like to see them
-
there is also southern georgia blacksmiths http://southgablacksmiths.ning.com/ glad to find there are more people on ifi than just me from georgia
-
check out this vid from history channel that poor fellow didnt know what that anvil couldve brought http://www.history.com/shows/real-deal/videos/heavy-metal#heavy-metal
-
i wonder how many ton that press was that was pretty cool
-
well this one isnt excatly portable but i suppose you could downsize it and bolt it up and it would work i know i am just a newbie here and you can take this how you want to this is just an idea to think about dad helped me make this table/forge http://www.iforgeiron.com/topic/28012-my-coal-forge/
sry about the double post my internet wasnt working well -
well this one isnt excatly portable but i suppose you could downsize it and bolt it up and it would work i know i am just a newbie here and you can take this how you want to this is just an idea to think about dad helped me make this table/forge http://www.iforgeiron.com/topic/28012-my-coal-forge/
-
i havent been to anykind of scrapyard yet but will keep that in mind i shined it up the other day with a wire brush on a grinding wheel they look good to me but it could be i am coming from the wrong angle with my looking i hae made several more to give away and i also sold one at 5 daollars according toRT that is a good starting price thanks for your comments
-
i did have to add more sand it really packed tight and hasnt settled afterwards so i am happy with it go ahead there PUGHMAN its here for the taking
-
wow 571 and reserve not met one day left
-
the reason i couldnt have this one longer is it would be too thin, and the pieces were scrap from some other job
-
-
-
ok got it all set up now and i also painted my forge clayed the firepot not that it needed it too much but was worried about the front it kept scaling changed the blower and made an anvil stand just need someone to help me get the anvil on it proly will get someone this eve
just need to build a roof over head that wont get in the way of dad 30 ft wide hanger door which isnt shown here -
ok just need someone to help me put the anvil on it then am ready to run again i used 90percent clay and the rest sand on the top hope it wont settle too much i packed it with a hammer first then put the plate on top and beat it till it bent a litle so i dont think it will settle much had water in there too
-
well not too hard but stiff anyway
-
i might mix sand with good ole georgia red clay and mix a little water in it so it hardens good
-
thanks if i would weld some pieces at the lowest i would put the anvil would that combat that tendency
-
sry bout the different sizes was playing with the resolution on my cell camera
-
anyone familiar with o2?
in Heat Treating Knives, Blades etc
Posted
here is what i know about 02 its an oil hardening steel and i plan on doing the triple normalize triple harden then triple temper but can i oven temper? if so how long? if not what is another way to temper? if yall have any critics about my planned process let me know i haven't started on the blade yet just doing research i found another link here about 02 but it didnt really address the temper issue (unless i shoulda bought the book) thanks ahead of time