forgemaster Posted May 23, 2010 Share Posted May 23, 2010 A while ago I posted some photos of some of our forging and stamping tools. A few of the blokes n sheilas asked if I could elaborate on their manufacture. Well,last night while I was sorting through some Tech notes stuff to send to Moony I found these, to make german pin dies, and making spring swages. These are they. I tried to find the post that I originally posted in but no luck. I have more of these exercises, containing hooks, sledge hammers, shackles, crankshafts, etc, if I can get the internet to work a bit better (keeps dropping out when posting this sort of stuff, this is my 3rd attempt) I'll scan more and post them. Cheers Phil Quote Link to comment Share on other sites More sharing options...
Glenn Gilmore Posted May 24, 2010 Share Posted May 24, 2010 Phil, Thanks for taking the time to post this. Any more sheets with PH tooling is appreciated. Glenn Quote Link to comment Share on other sites More sharing options...
Dillon Sculpture Posted May 24, 2010 Share Posted May 24, 2010 I have some dies from a R. R. shop that are similar to the german pin dies, with the set are ball dies and a long taper die, not sure what is for, I'll try and post some shots. Thanks for posting Phil, Glen, is that a flatter? Quote Link to comment Share on other sites More sharing options...
Fosterob Posted May 24, 2010 Share Posted May 24, 2010 Those look very helpfull and I hope you can post some more when you can, Thank you. I am having trouble viewing the whole pic at once, can anyone tell me how to re-size to make it all visible? Rob Quote Link to comment Share on other sites More sharing options...
David Browne Posted May 24, 2010 Share Posted May 24, 2010 Those look very helpfull and I hope you can post some more when you can, Thank you. I am having trouble viewing the whole pic at once, can anyone tell me how to re-size to make it all visible? Rob This should help...Images re-sized. -DB Quote Link to comment Share on other sites More sharing options...
Jura T Posted May 24, 2010 Share Posted May 24, 2010 Thanks for posting those. Additional ones are definitely welcome. Quote Link to comment Share on other sites More sharing options...
welder19 Posted May 25, 2010 Share Posted May 25, 2010 Much better david, thanks. welder19 Quote Link to comment Share on other sites More sharing options...
Glenn Gilmore Posted May 25, 2010 Share Posted May 25, 2010 Michael, Yes we had some 3" dia 4140 and forged a bar to cut into lengths for flatters. Worked real well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.