Chris C

I know this is an older thread................but I, also, am older, so............................................ I keep a gallon of Evaporust on my shelf all the time. It's great stuff and has never let me down. I've cleaned up so many "lost and forgotten" rusted items and made them almost new and totally practical again that it's paid for itself many times over. Love the stuff. Highly recommend it. I'd do tele-commercials for them, if they'd hire me. Did I mention I like Evaorust? Go buy a gallon.............you'll never regret it. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Others have said it........................but please, oh please do not stain wood with that kind of chatoyance. If you just have to color it, use denatured alcohol based aniline dyes. I wouldn't do a thing to that piece of wood except put a nice penetrating clear finish on it. Who needs dye when God does a great job on his own?

Thanks, JHCC, all good advice. I'll learn............albeit very slowly. I'm usually a pretty fast learner, but I have to admit I'm embarrassed I burned myself so much last night. Didn't really "burn"............but a quick pull back and "Ouch" and a couple of other expletives when it would happen. The guys all got a good laugh out of it. That's okay, I don't mind adding levity to the evening.

Sorry, I didn't bring the evidence home. Maybe an honorary membership???

Is it wrong to covet another man's hammer??????

Well Frosty, I done went'n did it! I kept pickin' up hot iron tonight. Can't seem to get used to how long it takes that danged stuff to cool off. To me, if it's been sittin' on the floor for 15/20 minutes and it's gray, it should be at least "touchable"...................but dat ain't necessarily so! So where do I send the piece that has my fingerprint in it?????

Don't worry, Frosty, I'll probably do something dumb like that tonight!!!!!

I'll accept! Where do I sign my name?

Well put..............and well I know, for I am a teacher at our local Vo-Tech school. Well, actually, my comment was in reference to the Thursday night blacksmithing group. But any time you folks care to tuck me under your wing and consider me "one of yours", I'll gladly accept. Do I get a merit badge, secret decoding ring or any other such paraphernalia???

Gobsmacked, Ausfire. Bet you get a lot of offers to buy it at the local show in July. That's really an outstanding piece of artwork.

Besides, Frosty, "A blacksmith ain't a blacksmith without gettin' his Peter Wright." I heard that at last week's gathering.

Well, the guys in this group (dare say I, my group?) have done just that. If you guys here on the forum hadn't mentioned that source, I'd never have thought about it. I'm happy to find it. Even if I can't use all that I get from them, at least I can pass bits on to others.

That's pretty much the plan. I've got to finish up my tongs and then I'll go "sit-spit-n-whittle" with the old-timers a spell and see which of them will help me with projects I can use those bits on. Believe me, Mike, I have to pinch myself every time I think about the opportunity given me by this group.

Okay...................but seeing as my primary work is going to be knife making, I'm not so sure I'll need to do any hammering at the vise.

I've got a 9" Buffalo Bench vise bolted to my work bench. It's in excellent condition. Being new to this blacksmithing interest, I'm wondering if it will be as useful to me as these "stump" vices I see pictures of. Or should I look for something else?

Mine came from.........and will be coming from Home Depot's rental desk also. The guy said he'd call me when he had a bunch..........but I'll check with him occasionally. The one I've got is the pointed one...................like you'd just carved a stick to poke in the ground. But I can sure see why the chisels would be better for turning into Hardy tools. Like I said, I'll give'em away or, as you suggested, use them for trade stock. They don't take up a lot of space and I see no reason in throwing away good steel.

Okay. Guess I'm not going to find much use for them even if I find a bucket full of them then, huh! Was hoping for a free source of good material. I'll just take'em to the Thursday night group and give them to the "leader of the pack" so everyone else can make things out of them.

Gosh, I wasn't aware of that. So is the scaling carbon sluffing off? Thanks for that advice, JHCC. So would it be better to save the bits for things like chisels, punches, Hardy tools, etc?

Good to know, Frosty, thanks. I understand the definition of "upsetting" but how would I increase the diameter of this bit THAT much without specialty tooling?

Thanks for the encouraging post. I'm excited about this material. Newbie question: The hammers you made are obviously not much larger than the original jackhammer bit. If I wanted to make something like a two pound cross peen hammer out of the material I have, would it be possible to forge weld multiple pieces together and make the larger hammer?

Super! I'll keep gathering the free material as it's offered. I can get some of the experienced xxx xxxx blacksmiths to help me learn how to turn it into tools. They are a great bunch of guys. The owner of the shop has more forges, anvils, power hammers, surface grinders, 2x72 belt grinders and multiple racks of hammers and tongs available for all to use at will. Great guy. I appreciate his generosity, but sure wish he'd charge us something to use all his "toys".

I'm a dang-fooled newbie. Joined a local regional blacksmiths club and pulled my first hot steel out of a forge last week. (is that newbie enough?) I "scored" a jackhammer bit today. Left my card with the fellow who gave it to me and he promised to call me when he has more. Says he throws them away all the time. Rings like a dinner bell when dropped, so it's good and hard. I've been doing my research and there's a good possibility it's 1045...............but I'm such a newbie I could only attest to the fact it's not cheese! (my stab at humor!) I have no idea how to test it. I understand experienced smiths can sometimes "read" steel fairly closely by putting in to a spark test. I have no idea how to do that. From what I've read, this chunk of steel would be good for a lot of things in the shop, i.e. chisels, punches, maker's mark, etc. But I'm also hoping it would make a good hammer head, as I'm interested in that sort of thing. Any comments or suggestions would be welcomed. I'm a newbie........a sponge just soaking up all the knowledge all I can.