Jump to content
I Forge Iron


  • Content Count

  • Joined

  • Last visited

Everything posted by Kako95

  1. I currently have a firebrick forge but I as looking to upgrade as the temps aren't really consistent nor, I feel like, high enough. I found this in amazon, hopefully that's it? West System 406 Collodial Silica 275g https://www.amazon.co.uk/dp/B004QXLKT2/ref=cm_sw_r_cp_apa_i_JCZKDbNMF5AAN Thank you for your experienced inputs! 20190228_162212.mp4
  2. Hi everyone! Please, I know, before you bash me, this has been asked hundreds of times. The problem I have is that I have ABSOLUTELY no access to any of the 2000C° plus refractory linings. I live on a small island in Portugal, there are no blacksmith, no forges, so no forge related stores. And due to EU regulations, most refractories contain chemicals not really suitable for exportation/importation so any outside shops I find, don't ship them here. I managed to buy a decent amount of ceramic blanket, but I'll be getting my cancer through smoking, so I need to coat it. So I was thinking if
  3. Made the radius on my anvil today, didn't want to overdo it without getting an opinion, easier to redo that to undo. What do you think? Said by side comparison. Also got my first touch mark of many to come today funny how it's so hot it doesn't even hurt, everything just dies. Oh well, tools of the trade I guess.
  4. Oh, on the way home is was trying to figure out how to keep that little edge from happening, now I understand. Thing is, my anvil edges are in mint condition so I'll have to figure something out hehe Thank you so much frosty, your help has been invaluable, I wouldn't have managed all of that on my own, specially with no one to help around these parts.
  5. That's what I was thinking after I looked at the picture, the hole is definitely huge and in messing with th whole forge. I'll get to drilling tomorrow, as that needs to be resolved asap I noticed the flame was rich as well after the picture and did some fiddling with the tuning again. Once the forge was hot i wasn't seeing any orange flames. What's happening now is that the stainless plate is gating red hot, again, due to the huge hole, must fix that. I noticed that today there was a bit more scaling, like what in used to seeing in videos, so maybe I'm starting to get to the sweet
  6. Pulled out the burner to about 7mm in the forge now, and as promised, here's more detailed pictures
  7. There's a couple of errand hammer blows, which showed me I need better control, a couple of delaminations which I noticed was from when I made the shoulders, not hitting on the same spot and I couldn't get the main vein in, again, better control. Also, couldn't get the hoop done, from not tapering enough The scales is probably from my excitement to see my work that I quenched in water because I didn't really notice any scales forming when forging, and I did brush it from time to time. I know, never quench in water, but I figured this was just a mild steel practice piece so I didn't bother
  8. You're absolutely right, but I wanted to show how the flame was doing and thought 'since I'm here and filming, might as well show the rest.' will take pictures tomorrow. The burner isn't as far back as you recommended, need to so some changes to the rig I setup to hold the burner, but I was just too excited to do that today lol The hole in the brick is 55mm wide, which is huge, I know, but I was planning on doing something different before I bought this burner, gonna drill another brick with the appropriate size, just not looking forward to almost an hour of drilling to get through
  9. Made the changes, this is what I have, what do you think? Tip still seems to get red hot 20190301_151850.mp4
  10. I do have some understanding of the science behind it, as I've done my research to build a burner of my own. Couldn't manage mostly due to the lack of the right materials. I like doing my homework before doing anything to make sure I have the best chances of success, I obviously lack the experience tho. Thanks a lot for the help, I'll try all of the above later today and give you some feedback, I'm confident it'll work. Also, as I said, the forge I have I think will suffice for now, as I gain more experience and love for the trade I'll obviously upgrade. Just didn't want to spend t
  11. Yeah, it's the measurement used o their gauge. But I can see how that makes some sense as my forge is on the smaller size. I guess I got a bit scared of going lower pressure as there were huge orange flames shooting out, guess I panicked a bit and didn't adjust my choke. Again, more testing needed, just wanted to see if there would be a merciful God who would enlighten me.
  12. As always, quick and helpful community, honestly one of the best forums I've been part of. Anyway, at the time of recording I was using 0.1 mpa, which I already thought it was low, as I've seen people being successful being around 0.15mpa I can't really remember but I believe that when I lowered the pressure I would get orange flames shooting out the entrance and the choke would not prevent that. My assumption was that there wasn't enough venturi effect to draw air in. I'll do more testing tomorrow. Also, do you think I'll have any problems with the flare getting red hot? I'd
  13. Hey everyone! Newcomer to blacksmithin, just got done building up my forge. Just some firebricks stacked and a Devil's Forge propane burner. (see video attached) One thing that i noticed is that it seems that my burner tip seems to get Red Hot, kinda looks like it's burning too early in the flare and im not sure about the flame noise (Never seen a proper forge in my life, no one forges in the island where i live) I've spent about an hour fiddling with different pressures and air intakes, to no avail (maybe the tip was so hot that it was messing with the tuning) I was wondering what
  14. Thanks, will read. I'm guessing 15 to 20kg,haven't got a scale on hand
  15. Quick update on the restoration. Still got the nooks and crannies to take care of but coming along nicely. Edges are in mint condition. The brand is Ferfor, maybe someone know anything about it? Also, Thanks a lot for all the tips, luckily I have a lot of wood at my disposal (live in Madeira Island, 60%is trees) so I'll have a few trial and errors and update you when I can.
  16. Oh so you're saying to literally make a negative of the spike on the stump and THEN glue it and hammer it into place. Thought I would be a smaller hole to pressure fit, that's where I based my fear of splitting the stump. Thanks for the tips
  17. That's what I initially thought but since the spike is quite thick I feared it would split the wood. How wide do you reccon I should drill the hole?
  18. Hey guys, first time poster, sorry if in wrong category. I've bough this small anvil for 15€ but I can't figure out how to secure it as it has a spike on the base. I've done some research and found nothing like it, any help will be appreciated.
  • Create New...