Scrambler82 Posted July 31, 2017 Share Posted July 31, 2017 I have looked and looked and searched under every name/member I can think of but I can not for the life of me find the drawing I remember for an "Add On Hardie Hole" ! I remember the drawing was of a large round piece of steel anvil, with a Hardie Hole added to the side made from three pieces (I think) of 1" steel bar welded to the side; it made a perfect 1" Hardie Hole. (I do remember Thomas talking about it but I am not sure if he posted) If anyone remembers the thread or post, or wrote and posted the original post/thread, please let me know, I have told a number of members here on the site about it and wanted to post either the drawing or a link to the thread, so all can use the method of adding a Hardie hole to a chuck of Steel Anvil and getting more versatility out of their anvils ! Thanks to any and all that respond... Quote Link to comment Share on other sites More sharing options...
Glenn Posted July 31, 2017 Share Posted July 31, 2017 Weld a 1 inch drive socket to the side of the anvil and use that as a hardie hole. Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted August 1, 2017 Share Posted August 1, 2017 Make sure it's an impact socket Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.