Joel OF Posted January 5, 2016 Share Posted January 5, 2016 If my pics upload at right angles, clicking on them usually rotates them back to their correct orientation. Not sure these are commonly used or not... Mag drill vise bracket, speaks for itself really. Made mine in a hurry from scrap RSJ & a couple bits of angle. If your pillar drill has keyless chuck and does up too tight on larger diameter bits a strap wrench around the collar gives you better grip to undo the chuck easily. Quote Link to comment Share on other sites More sharing options...
VaughnT Posted April 14, 2016 Share Posted April 14, 2016 Brilliant. Quote Link to comment Share on other sites More sharing options...
Frosty Posted April 14, 2016 Share Posted April 14, 2016 Wish I had a mag drill. <sniff> Good practical tips, thanks Joel. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
ironwolfforgeca Posted April 16, 2016 Share Posted April 16, 2016 don't even want a key less chuck ??? why thats like having a reg chuck on a hammer drill rented one before to try out well short story got a spline drive hammer drill LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.