M.J.Lampert
-
Posts
665 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by M.J.Lampert
-
-
5 minutes ago, Irondragon ForgeClay Works said:
Can we talk y'all into a repeat?
lets see you cannot use : nukes, navy, airforce or armored corp and only half the land troops just to make it even
M.J.Lampert
-
42 minutes ago, Frosty said:
I'd hate to ruin a perfectly good tank
just use a French tank they will be able to transport faster that way. they put the 14speed tranny the wrong way they only got 1 speed forwards
canada has slacked off on our military for the last while and now we are in a bad spot if any one attacks us but instead of increasing strength they use the take guns from legal owners
M.J.Lampert
-
im "SORRY" are you trashing me and my friends
M.J.Lampert
if ya wanna attack us remember war of 1812 (British Canada burnt the white house)
-
who needs a trebuchet when there's tankapults. though ammo would be quite expensive
-
das looks good just out of curiosity please tell me if its wrong to ask but how much is this costing the customer
billy looks nice and of course you have a soft spot for tanks you spent years around them
M.J.Lampert
-
ah the trebuchet built one with a few classmates for a chinse based "renaissance fair i will look around and see if i can find a pic of these (there was 2) this was also the time i built a Chinese Ge and took it to school as I was in charge of the weapons section(this was a mild steel replica that was blunted and okayed by the principal a outdoors kind of guy who likes hunting and fishing) the first in pic is what it looked like
M.J.Lampert
-
ok good to know all i had ever saw told even on here was 1in balls to test.
guess ill look through the shop or ammo pouch for some other ones
-
slingshot ammo would be to small any ways 3/4in min
as a side note i use 3/8 and 1/2in ball berrings as slingshot ammo and rocks as target ammo i have killed grouse (wild chicken) with both ammos though the BBearings fly truer
-
oh and for testing it i have a 1inch BBearing should i also test wit a hammer for ring??
-
yes turns out we need to go in tomorrow so let you know wednesday night at the latest
thanks for the advice my father said to get it even if it turns out cast-steel as we can weld a hard plate on top cast iron would mean no go but all i have now is a 10-20ish skidder rotate pin with 50% rebound(6in from 12in drop that i havent actually tried(K-wool got exposed so not running) so the wieght would be nice though again i may wait for a real anvil and put my money where it would last then again it such a good deal and if its better than 60% rebound i might try it but then again... oh well the voices tel me to go for it
M.J.Lampert
-
3 hours ago, JHCC said:
Can you tell us the name of the vendor?
KMS Tools and equipment my branch is in Prince George having looked at it online i
M.J.Lampert
-
2 minutes ago, Frosty said:
I bet an anvil would really whistle flying down range.
well theres only one way to find out
in canada a cannon of that bore would be illegal (crazy politicians ww1 and 2 artifacts ar now ilegal but dont get me started)
M.J.Lampert
-
waiting to see progress as i might try myself
M.J.Lampert
-
yes i will be going in within the time of the sale we usualy head to the "city" one a month and this is a month long sale
M.J.Lampert
-
33 minutes ago, Chimaera said:
MJ- I’ve got a printer and am at least somewhat experienced in OnShape. Been starting air soft recently. Did you design the CAD models? If so, congratulations! They look great! I just might try building one myself...
yes I designed it myself if you wait till next year I will have one designed that is a better replication of the KV-2 as some of the ratios are incorrect to the actual design and some of the small details but its a school project due in 2 weeks so oh well
M.J.Lampert
-
good job frazer
M.J.Lampert
-
5 hours ago, BillyBones said:
Alligators have a broad flat snout while a croc is more pointy and round.
Dont matter really though i wont be paying that close attention whilst running in the opposite direction. Like bears, color don't matter what matters is how fast i can get away from it.
haha your dead they can run way faster than you. dont look at colour(color for yankees) if you see a bear look at shape here is a good link for this Bear Identification (U.S. National Park Service) (nps.gov) also IMO dont bother with bear spray as the bear is usually upwind and all you do is season our self for it.
if its a black and it attacks play dead andcurl in a ball covering yourneck if an old grizz climb a tall thick tree
5 hours ago, Daswulf said:You dont have to be fast, just faster then the other guy.
a smart man ;
"Why you wearing runners?" asks the man with 30lb hiking boots
reply "i wish to let the bear eat you in peace, I'll be down the trail about 5 km and be back to grab your gear later"
M.J.Lampert
-
i saw this steel of a deal in a flyer and am wondering if any one has had any experience with these anvils with tax the 165lb would be $447.94 CAD which is 2.71/Lb CAD(2.24USD) will do a rebound test before i get anyways just wondering if this would be a good investment
M.J.Lampert
-
5 hours ago, BillyBones said:
about an hour later the bleeding stopped.
crazy glue!!!!!!!!!!!!! i will bit a little tourniquet on(rubber band) squish the blood from immediately on the spot sop it up and put a thin line of glue on the finger and blow on it then take the tourniquet of within 2 min of putting on the glue holds together and seals the cut then as the tissue grows back it will pop right out no prob
M.J.Lampert
oh and the neighbour said he would dig out his RR track/ cat spring anvil for some work i did for him
-
2 hours ago, ThomasPowers said:
as does fresh blood BTW,
"probably" illegal now but IIRC i read that it the middle ages some blades where quenched by putting a red hot blade through the heart of a prisoner or a slave who no longer serves a purpose to its master. not 100% certain of it butt makes some cents for a blood quench as fresh is required. nowadays one would maybe do a pig if necessary?
M.J.Lampert
-
1 hour ago, Mikey98118 said:
gas rated Teflon tape
ok good to know
MJForge iwas thinking back to tuning my frosty t and if i remember correct that is a problem of too rich remember frostys numbers are a ballpark you need to tune it more from there raise the tip up. if still too rich trim1/16th off and try again also be sure to clear the mig tip after cutting frosty or mike may say other than me though so don't take me word for word
M.J.Lampert
-
warning teflon tape and propane don't mix if necessary to seal find a paste threadlock
also please give a few pics of it running
and READ THIS FIRST we are happy to help you frost will be along shortly to let you in formally but till then welcome to the addiction and keep safe (hold steel on cold end and hammer hot end ) (don't set self on fire) (etc.,etc.)
M.J.Lampert
-
ok i get it its not a iron but still this is what ive been doing since march designing a KV-2ish remote controled airsoft tank
i am posting this now as i have finally started to 3d print the parts for it i will post more on this as it comes along
linked are the 3d cad parts there is thill a few parts but this is about the gist of it
asembly
and the track for it
M.J.Lampert
-
one word: WOW!!!!!!!!!!!!
M.J.Lampert
(for both alexandr and das)
wisdom steel anvil, good?,bad?
in Anvils, Swage Blocks, and Mandrels
Posted
ok thanks for clarifying frosty i will use a bearing ball 1/2in ish