Wyatt Kindler

I'll add a piece of insulation board behind it. Thanks

That's the same math I did to come up with my final 8x9 opening. The adjustable opening probably would've been a good idea but it's a little late now... lol And as for the bottom plate in the front, I didn't have it there originally so I could put stock all the way through the fire. I didn't want the hood to take up lots of forge space. However I did add one to it but left about a 2" gap in the middle for more versatility. The hood seems to work very well. The ducting system isn't complete yet so I just added 4 feet of 10" pipe to test it. I lit a small pile of leaves in the firepot and the smoke went sideways up the hood very nicely.

Right now I have the opening about 10"x 11" with a 10" pipe. I'll decrease the opening to maybe 8x8 or 8x9. Thanks as always

I will fix that as soon as possible, thanks

I'm sure 12" would be the best but I got quite of a bit of 10" for free from family so I'm going with that. I also changed the design of the hood I'm going with, as Jim mention my hood design did not work at all. I went with a design very similar but with some small dimensional changes as the super sucker side draft. Should work much better. Thanks for all the great info, much appreciated

Ok, I'll take some time later on today to read more on hood design and entrance. Thanks

Ok thanks for the responses guys. As for the stack I have an 8" flange sitting in top for now but I still have to get the pipe. I'll try to get 10" or 12" if i can.

I'm building a new coal forge and have a large part of a stainless steel drawer that is going to act as a hood. I know it's not the perfect shape but it seems to be about the best I could come up with for no cost. I am a little concerned about the hood being stainless steel; will the stainless give off any sort of toxic gases at a high temperature or anything else hazardous I should know about? I'm not sure what grade of stainless it is. Thanks, Wyatt

As for the date, it was made sometime before 1898. It seems to be a later German Trenton as the earlier ones have different stamps.

Just picked up another Trenton this morning. Weighs 159 pounds and I believe it's another made in Germany. Got it for $200 which I think was a fair price for these days because there's a few weld repairs on the edges, although they seem old and have held up through use. It has excellent rebound (about 90-95% with a half inch ball bearing) and a nice ring. The bottom photo is comparing the stamps between the 159 and the other 234 boker I have. The new to me 159 can clearly read "Trenton, patent, solid wrought ( in a circle) and the weight, 159.

It also has that signature PW look to it, nice anvil.

My broken Boker Trenton also has a bit of the peter wright look with the flats on the feet but is clearly made in Germany.

On the note of prices at the moment, it sure seems FIF wont be going away any time soon. More and more people seem to be watching and enjoying it as the seasons progress.

Got some good laughs out of this, the CL for Buffulo NY is pretty funny at the moment with the keyword anvil.

Cool to know these were drop forged. I like the u-bolt design as well, i recently found a 6" peter wright leg vise that didnt have a mounting bracket. Simply did exactly what you said, i forged a u-bolt out of some 5/8 round and used a heavy piece of angle as the mounting bracket. Thanks for the info. Heres that PW with the u-bolt.