Daswulf

Well spoken Frosty. It is a learning experience. I'm already mentally taking notes on how to do better next time. Good advice on the bits, that will be high on the list. I could have done better on the reins as well but I have to admit that that was due to my impatience to get em done. (Admittedly my hand was a bit sore too) That shouldn't ever be an excuse for poor finish work.  

  I will keep the old ones hanging around as a reminder. And I'll continue to make more. 

Thanks Mac, I will.

Thanks but I couldn't let that stand on my part. I went up tonight and tried again. I'm way happier with the second pair as far as confidence that they would hold up. So here's the second attempt beside the first. 

the reins kicked my butt being RR spikes lol. i'll keep at it and keep looking for better ways. i had spikes laying around and i liked the tutorial on YT.  looked easier then it is for someone starting out but i'm not shy to keep trying.

Ugh! Why?!

I have heard of them an am thinking of joining soon. Looks like it would be a good thing to get out to some of their open nights. Thanks for reminding me about it. :)

welp, I made my first set of tongs tonight based on TechnicusJoes RR spike tongs. Felt like I started off correct but it went odd from there. My fault of course. Took me about 3 hours while relaxing the evening with some beer   but as much as I'm disappointed in my work on them they do function. I wouldn't say they would work for generations because of my mistakes. But I accept that for my first set. I'll improve from there I hope. I can tell where I screwed up. That little crap s hook was made using these quickly just to try them out.  i know they are poop, but any criticism may help my focus.

I understand what you mean Thomas. when i find anything for a good price i snag it even if it's to hang onto for either a back up or (probably later) to help out others. There's a guy in Monroville up by Pittsburgh that buys most stuff up then sells it at a premium so unless i'm in dire need, i'll keep hunting and pecking, or make it.

  Frosty that is one well thought out floor. as far as the heated floor it would come in handy here in winter but i can see it as pretty important where you are. i get by with a natural gas heater that never seems to warm the floor, tho i could stand to insulate the roof.

That's a lot of postvices. After thinking about it, I'm pretty sure I have 5 of em. The nice one I use, a big sucker that needs a spring and bolt down, another one like I'm using that needs a bolt down, a little one a friend gave me that someone cemented in a small barrel, and one is attached to the back of a jeep cj5 I bought for parts. Wasn't your old jeep was it Thomas?

keeps people on their toes and keeps out the lazy footed folk. I look around and see potential everywhere. And it's nice not to have to run out for every nut and bolt you need. just dig around and Bam! Project finished!. my first forbidden. Noooo.

Thanks for the warm Welcome Frosty. On the dump flap, my initial idea was to make a flap thats actuated by a foot pedal. That modification is in the plans and i'll check out the flap caps.. I hadn't thought of moving the post vice but that's an excellent idea. So far i had only been using the twisting wrench from the top but it's best to be ready for any project. I plan on adjusting how the area is set up once i get non essentials out of the way. 

    Yes, "high steppers" haha. That I am. it's a matter of me organizing it all. ( still cant find my little orange jigsaw...how do you lose an Orange jigsaw...)  I read a post on stock storage on here that was inspirational with lots of ideas on that.  I am lucky to have a beautiful work bench, my grandfather built, that wraps around and i'm using it as storage rather then work space   , but that's all in process of happening.

Thanks for the advice and again for the welcome. Can't wait to learn more. so far it's been great. (aside from burning some things off in the fire that i've spent a bit of time on.) all in the learning process..  

Thanks. I still need to open up more space for better movement around the equipment. still hunting for a good belt sander i can afford or to just make one but first i'm glad to build some beginner skills with technique. slippery slope indeed.  as if i didnt buy enough tools for automotive repairs, Double everything for home and at work. now this hehe. least i only do this in one spot.

Hi, my name is Aric. I live about 40 minutes south of Pittsburgh Pennsylvania in Fallowfield township.  My career is in autobody, collision repair.  I've liked the art of black smithing since I can remember being taken to old forts or outdoor craft shows. My main interests started out in blades and as a hobby here and there I would make blade objects to toy with or later as pretty wall hangers, through stock removal. 

    Not having any guidance, I kept thinking that I needed all the real deal stuff to get started forging so I collected stuff i'd need as I could find/ afford it. Then the more I researched the more I learned how much time I was wasting since I could have started way earlier off with the simplest of tools.  So last fall I finally built a brake rotor forge, found a source for coal, and got to hammering.  It's been a fun start. So far I'm still sticking to smaller stuff to work on some skills first. Also just found a source for stock so I'll be heading there later this week to get proper stock for tongs and other projects. 

  I've been really glad to find IFI and all the great info and people here. Slowly I'll get better and improve my forge and skills. 

  Don't want to make this post too long. So, hello and here's some pictures of what I'm working with at the moment. Forgive the absolutely junk filled garage as I've had to work on some cars for friends and family and stuff tends to get piled up when I need the room.